[Sun Nov 27 22:42:07 2011] Detection parameters:
  Position = (403.0, 352.0) = 18 1 16.33 -23 15 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.0 +/- 15.3
  Background counts = 55.8
  Rate = 0.006 +/- 0.001

[Sun Nov 27 22:42:08 2011] Off-axis axis estimate = 8.52'
[Sun Nov 27 22:47:51 2011] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 22:47:51 2011] Initial guess for spatial extent in simple fitting = 10.69"
[Sun Nov 27 22:47:51 2011] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.030
[Sun Nov 27 22:47:51 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 10.69"
[Mon Nov 28 06:30:01 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src39.ximg exists
[Mon Nov 28 06:30:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src39.csv
[Mon Nov 28 06:30:01 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src39_1.ximg exists
[Mon Nov 28 06:30:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src39.csv
[Mon Nov 28 06:30:01 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 06:30:02 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Mon Nov 28 06:30:03 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Mon Nov 28 06:30:03 2011] Fit fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Mon Nov 28 17:19:13 2011] Source 41 is offset by -2.273386 and -7.829386 pixels which is larger than
2 X fitted extent = 1.344087 x 1.344087, not incorporating fit results
[Mon Nov 28 17:19:13 2011] Spatial fit model total counts = 838.261000, observed total counts = 850.000000
[Mon Nov 28 17:19:13 2011] Offset between fit and detection position for source 41 = 4.377228 pixels
[Mon Nov 28 17:19:13 2011] 825.484000 total counts/ 272.886000 bgd. counts: snr = 33.451738
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 4.377228 pixels
  Position = (404.0, 347.7) = 18 1 16.02 -23 15 52.4
  Extent = 21.4 (21.4-21.4)", rotation angle = 0
  Source counts = 552.6 +/- 28.7
  Background counts = 272.9
  Rate = 0.03 +/- 0.002
[Mon Nov 28 17:19:13 2011] Source 41 is offset by -2.568940 and -2.073935 pixels which is larger than
2 X fitted extent = 8.408243 x 1.202823, not incorporating fit results
[Mon Nov 28 17:19:15 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:19:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:19:15 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 17:19:15 2011] Source does appear to be extended
[Mon Nov 28 17:19:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 17:19:15 2011] Source is confused with source 39
[Mon Nov 28 17:20:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 17:20:14 2011] Initial guess for spatial extent in simple fitting = 21.37"
[Mon Nov 28 17:20:14 2011] source mask rpix=4.9, npix_max = 117, mask sum = 88, frac = 0.751
[Mon Nov 28 17:20:14 2011] Giving source the simple spatial ID 34 for pass 1, mean size = 21.37"
[Tue Nov 29 01:54:48 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src34.ximg exists
[Tue Nov 29 01:54:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src34.csv
[Tue Nov 29 01:54:48 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src34_1.ximg exists
[Tue Nov 29 01:54:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src34.csv
[Tue Nov 29 01:54:48 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 01:54:50 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Tue Nov 29 01:54:50 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Tue Nov 29 01:54:50 2011] Fit fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Tue Nov 29 10:56:28 2011] Source 41 is offset by -3.686720 and -2.671057 pixels which is larger than
2 X fitted extent = 1.213058 x 1.213058, not incorporating fit results
[Tue Nov 29 10:56:28 2011] Warning, spatial fit 34 centroid is now closest to src. 39
[Tue Nov 29 10:56:28 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 10:56:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 10:56:28 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 10:56:28 2011] Source does appear to be extended
[Tue Nov 29 10:56:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 10:57:18 2011] XMMSAS src. selection expression = ellipse(35096.463400, 30201.232000, 1282.170037, 1282.170037, 0.000000, X, Y)
[Tue Nov 29 10:57:18 2011] Writing source region out to fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src41_src.reg
[Tue Nov 29 10:57:18 2011] Extracting stamp from image fullrun_pn_xmm0145970101_pi300-10000_cl_sm2.00.img.gz, (330, 274) - (478, 421)
[Tue Nov 29 10:57:18 2011] XMMSAS bgd. selection expression = annulus(35096.463400, 30201.232000, 2136.950061, 4273.900123, X, Y) && !ellipse(35117.578000, 27843.862000, 930.488027, 930.488027, 0.000000, X, Y) && !ellipse(33247.802000, 33558.294000, 3434.640099, 3434.640099, 0.000000, X, Y) && !ellipse(28347.182200, 31396.564000, 2506.504072, 1210.104035, 104.799800, X, Y) && !ellipse(29601.996200, 34231.342000, 1416.352041, 1416.352041, 0.000000, X, Y) && !ellipse(30986.334000, 35073.866000, 1072.712031, 1072.712031, 0.000000, X, Y) && !ellipse(30675.723080, 35391.069000, 1369.304039, 1369.304039, 0.000000, X, Y) && !ellipse(31731.448000, 34628.070000, 1735.280050, 1735.280050, 0.000000, X, Y) && !ellipse(32179.836000, 34281.142000, 1720.120049, 1720.120049, 0.000000, X, Y) && !ellipse(30195.562000, 34639.816000, 3145.248091, 3145.248091, 0.000000, X, Y) && !ellipse(28765.646000, 32839.964000, 3152.096091, 3152.096091, 0.000000, X, Y) && !ellipse(29312.528000, 34079.698000, 1576.048045, 1576.048045, 0.000000, X, Y) && !ellipse(29568.139800, 33744.060000, 1572.624045, 1572.624045, 0.000000, X, Y) && !ellipse(32390.103668, 32840.893127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33636.771160, 32049.160000, 715.034421, 715.034421, 0.000000, X, Y) && !ellipse(31063.234192, 31398.317474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34895.616000, 30672.842000, 1674.328048, 1674.328048, 0.000000, X, Y) && !ellipse(34761.188000, 30290.414000, 3194.480092, 3194.480092, 0.000000, X, Y) && !ellipse(34087.554000, 29125.337600, 1597.240046, 1597.240046, 0.000000, X, Y) && !ellipse(33655.297920, 27775.896000, 3084.368089, 3084.368089, 0.000000, X, Y) && !ellipse(34381.994263, 27446.306366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33695.196000, 27009.510000, 1542.184044, 1542.184044, 0.000000, X, Y) && !ellipse(33849.780365, 26475.778992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33370.459961, 26050.889343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34144.789060, 25478.086000, 1008.632029, 1008.632029, 0.000000, X, Y) && !ellipse(33559.013400, 25071.898000, 1280.752037, 1280.752037, 0.000000, X, Y) && !ellipse(34131.624260, 25235.238000, 868.000025, 868.000025, 0.000000, X, Y)
[Tue Nov 29 10:57:18 2011] Writing fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src41.gif
[Tue Nov 29 12:49:52 2011] Mean detx,y = (8068.34, -2815.01) 
[Tue Nov 29 12:49:59 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 12:50:53 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 12:50:53 2011] Setting source spectrum file to fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue Nov 29 12:50:53 2011] Setting bgd. spectrum file to fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Wed Nov 30 22:34:48 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:48 2011] Error reading totcts from fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Wed Nov 30 22:34:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:51 2011] Using photon index=1.80, rate=0.0291, arf fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src41.arf
[Wed Nov 30 22:34:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:51 2011] Updating source flux to 1.3e-13
[Wed Nov 30 22:46:01 2011] Flag b found in src. 41 procflags, skipping spectral fitting
[Wed Nov 30 22:46:01 2011] Flag c found in src. 41 procflags, skipping spectral fitting