[Sun Nov 27 22:42:06 2011] Detection parameters:
  Position = (357.6, 361.5) = 18 1 30.65 -23 14 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.3 +/- 18.5
  Background counts = 103.8
  Rate = 0.006 +/- 0.001

[Sun Nov 27 22:42:08 2011] Off-axis axis estimate = 6.27'
[Sun Nov 27 22:47:51 2011] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 22:47:51 2011] Initial guess for spatial extent in simple fitting = 9.56"
[Sun Nov 27 22:47:51 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.858
[Sun Nov 27 22:47:51 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 9.56"
[Mon Nov 28 06:30:01 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src35.ximg exists
[Mon Nov 28 06:30:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src35.csv
[Mon Nov 28 06:30:01 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src35_1.ximg exists
[Mon Nov 28 06:30:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src35.csv
[Mon Nov 28 06:30:01 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 06:30:02 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Mon Nov 28 06:30:02 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Mon Nov 28 06:30:02 2011] Fit fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Mon Nov 28 17:19:13 2011] Source 37 is offset by 6.296554 and 6.687856 pixels which is larger than
2 X fitted extent = 1.702372 x 1.702372, not incorporating fit results
[Mon Nov 28 17:19:15 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:19:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:19:15 2011] Assessing source extent using major
[Mon Nov 28 17:19:15 2011] Source does appear to be extended
[Mon Nov 28 17:19:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 17:20:14 2011] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 17:20:14 2011] Initial guess for spatial extent in simple fitting = 9.56"
[Mon Nov 28 17:20:14 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.858
[Mon Nov 28 17:20:14 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 9.56"
[Tue Nov 29 01:54:48 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src30.ximg exists
[Tue Nov 29 01:54:48 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src30_1.ximg exists
[Tue Nov 29 01:54:48 2011] Fit fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src30 appears to have run properly
[Tue Nov 29 01:54:50 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Tue Nov 29 01:54:50 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Nov 29 01:54:50 2011] Fit fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Tue Nov 29 10:56:28 2011] Source 37 is offset by -5.850113 and -7.998581 pixels which is larger than
2 X fitted extent = 1.192966 x 1.192966, not incorporating fit results
[Tue Nov 29 10:56:28 2011] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 12.347679 pixels away
[Tue Nov 29 10:56:28 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 10:56:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 10:56:28 2011] Assessing source extent using major
[Tue Nov 29 10:56:28 2011] Source does appear to be extended
[Tue Nov 29 10:56:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 10:57:18 2011] XMMSAS src. selection expression = ellipse(31063.234192, 31398.317474, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 10:57:18 2011] Writing source region out to fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src37_src.reg
[Tue Nov 29 10:57:18 2011] Extracting stamp from image fullrun_pn_xmm0145970101_pi300-10000_cl_sm2.00.img.gz, (320, 324) - (395, 399)
[Tue Nov 29 10:57:18 2011] XMMSAS bgd. selection expression = annulus(31063.234192, 31398.317474, 1087.500000, 2175.000000, X, Y) && !ellipse(28322.128000, 31007.232000, 1365.104039, 1365.104039, 0.000000, X, Y) && !ellipse(33247.802000, 33558.294000, 3434.640099, 3434.640099, 0.000000, X, Y) && !ellipse(28347.182200, 31396.564000, 2506.504072, 1210.104035, 104.799800, X, Y) && !ellipse(29601.996200, 34231.342000, 1416.352041, 1416.352041, 0.000000, X, Y) && !ellipse(28045.387177, 30492.174561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31731.448000, 34628.070000, 1735.280050, 1735.280050, 0.000000, X, Y) && !ellipse(32179.836000, 34281.142000, 1720.120049, 1720.120049, 0.000000, X, Y) && !ellipse(30195.562000, 34639.816000, 3145.248091, 3145.248091, 0.000000, X, Y) && !ellipse(28765.646000, 32839.964000, 3152.096091, 3152.096091, 0.000000, X, Y) && !ellipse(29312.528000, 34079.698000, 1576.048045, 1576.048045, 0.000000, X, Y) && !ellipse(29568.139800, 33744.060000, 1572.624045, 1572.624045, 0.000000, X, Y) && !ellipse(32390.103668, 32840.893127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28263.974000, 32801.284000, 1538.320044, 1538.320044, 0.000000, X, Y) && !ellipse(33636.771160, 32049.160000, 715.034421, 715.034421, 0.000000, X, Y) && !ellipse(28918.206818, 30671.391693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34895.616000, 30672.842000, 1674.328048, 1674.328048, 0.000000, X, Y) && !ellipse(34761.188000, 30290.414000, 3194.480092, 3194.480092, 0.000000, X, Y) && !ellipse(34087.554000, 29125.337600, 1597.240046, 1597.240046, 0.000000, X, Y) && !ellipse(33655.297920, 27775.896000, 3084.368089, 3084.368089, 0.000000, X, Y)
[Tue Nov 29 10:57:18 2011] Writing fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src37.gif
[Tue Nov 29 12:46:27 2011] Mean detx,y = (4073.48, -4016.31) 
[Tue Nov 29 12:46:33 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 12:47:09 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 12:47:09 2011] Setting source spectrum file to fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Nov 29 12:47:09 2011] Setting bgd. spectrum file to fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Wed Nov 30 17:29:50 2011] Not generating rmf since there are only 90 counts
[Wed Nov 30 17:29:50 2011] rmf not generated due to insufficient counts
[Wed Nov 30 22:34:48 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:48 2011] Error reading totcts from fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Wed Nov 30 22:34:50 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:50 2011] Using photon index=1.80, rate=0.0064, arf fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src37.arf
[Wed Nov 30 22:34:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:50 2011] Updating source flux to 2.8e-14
[Wed Nov 30 22:46:01 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting