[Sun Nov 27 22:42:06 2011] Detection parameters:
  Position = (333.4, 386.1) = 18 1 38.29 -23 13 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.5 +/- 16.5
  Background counts = 77.0
  Rate = 0.006 +/- 0.001

[Sun Nov 27 22:42:08 2011] Off-axis axis estimate = 6.84'
[Sun Nov 27 22:47:51 2011] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 22:47:51 2011] Initial guess for spatial extent in simple fitting = 9.85"
[Sun Nov 27 22:47:51 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.981
[Sun Nov 27 22:47:51 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 9.85"
[Mon Nov 28 06:30:01 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src27.ximg exists
[Mon Nov 28 06:30:01 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Nov 28 06:30:01 2011] Fit fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src27 appears to have run properly
[Mon Nov 28 06:30:02 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Nov 28 06:30:02 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Nov 28 06:30:02 2011] Fit fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Nov 28 17:19:13 2011] Warning, spatial fit 27 centroid is now closest to src. 30
[Mon Nov 28 17:19:13 2011] Spatial fit model total counts = 1344.820000, observed total counts = 1345.000000
[Mon Nov 28 17:19:13 2011] Offset between fit and detection position for source 29 = 7.277228 pixels
[Mon Nov 28 17:19:13 2011] Warning, changing simple spatial fit ID from 27 to 32
[Mon Nov 28 17:19:13 2011] 1295.666000 total counts/ 947.390000 bgd. counts: snr = 11.315120
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 7.277228 pixels
  Position = (327.9, 381.3) = 18 1 40.02 -23 13 26.3
  Extent = 18.9 (18.8-37.7)", rotation angle = 0
  Source counts = 348.3 +/- 36.0
  Background counts = 947.4
  Rate = 0.02 +/- 0.002
[Mon Nov 28 17:19:15 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:19:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:19:15 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 17:19:15 2011] Source does appear to be extended
[Mon Nov 28 17:19:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 17:19:15 2011] Source is confused with source 34
[Mon Nov 28 17:20:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 17:20:14 2011] Initial guess for spatial extent in simple fitting = 18.85"
[Mon Nov 28 17:20:14 2011] source mask rpix=4.3, npix_max = 93, mask sum = 100, frac = 1.070
[Mon Nov 28 17:20:14 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 18.85"
[Tue Nov 29 01:54:48 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src23.ximg exists
[Tue Nov 29 01:54:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src23.csv
[Tue Nov 29 01:54:48 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Nov 29 01:54:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src23.csv
[Tue Nov 29 01:54:48 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 01:54:50 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Nov 29 01:54:50 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Nov 29 01:54:50 2011] Fit fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Tue Nov 29 10:56:28 2011] Warning, spatial fit 23 centroid is now closest to src. 20
[Tue Nov 29 10:56:28 2011] Spatial fit model total counts = 2858.540000, observed total counts = 2856.000000
[Tue Nov 29 10:56:28 2011] Offset between fit and detection position for source 29 = 4.633845 pixels
[Tue Nov 29 10:56:28 2011] Warning, changing simple spatial fit ID from 23 to 24
[Tue Nov 29 10:56:28 2011] 2186.765300 total counts/ 33.535300 bgd. counts: snr = 371.825631
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 4.633845 pixels
  Position = (331.2, 378.0) = 18 1 38.99 -23 13 40.7
  Extent = 39.4 (39.1-78.8)", rotation angle = 0
  Source counts = 2153.2 +/- 46.8
  Background counts = 33.5
  Rate = 0.1 +/- 0.002
[Tue Nov 29 10:56:28 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 10:56:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 10:56:28 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 10:56:28 2011] Source does appear to be extended
[Tue Nov 29 10:56:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 10:57:17 2011] Counts = 2153.230000, rescaling region sizes by 2.000000
[Tue Nov 29 10:57:17 2011] XMMSAS src. selection expression = ellipse(28765.646000, 32839.964000, 4728.144136, 4728.144136, 0.000000, X, Y)
[Tue Nov 29 10:57:17 2011] Writing source region out to fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src29_src.reg
[Tue Nov 29 10:57:17 2011] Extracting stamp from image fullrun_pn_xmm0145970101_pi300-10000_cl_sm2.00.img.gz, (59, 106) - (595, 595)
[Tue Nov 29 10:57:17 2011] XMMSAS bgd. selection expression = annulus(28765.646000, 32839.964000, 15760.480454, 31520.960907, X, Y) && !ellipse(13022.143200, 32967.854600, 531.824815, 531.824815, 0.000000, X, Y) && !ellipse(28322.128000, 31007.232000, 1365.104039, 1365.104039, 0.000000, X, Y) && !ellipse(26306.828980, 29866.280000, 1040.264030, 1040.264030, 0.000000, X, Y) && !ellipse(26329.656799, 29532.862030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27589.340759, 29090.701416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26896.304600, 27976.840000, 1182.360034, 1182.360034, 0.000000, X, Y) && !ellipse(26674.587400, 27638.136400, 1449.128042, 1449.128042, 0.000000, X, Y) && !ellipse(35117.578000, 27843.862000, 930.488027, 930.488027, 0.000000, X, Y) && !ellipse(26123.162000, 27333.188200, 442.948813, 442.948813, 0.000000, X, Y) && !ellipse(26455.132000, 26730.342000, 2180.608063, 2180.608063, 0.000000, X, Y) && !ellipse(27014.468600, 26953.305600, 1120.216032, 1120.216032, 0.000000, X, Y) && !ellipse(25977.232000, 26215.024000, 1090.304031, 1090.304031, 0.000000, X, Y) && !ellipse(25599.542200, 25390.928200, 1073.368031, 1073.368031, 0.000000, X, Y) && !ellipse(33247.802000, 33558.294000, 3434.640099, 3434.640099, 0.000000, X, Y) && !ellipse(28347.182200, 31396.564000, 2506.504072, 1210.104035, 104.799800, X, Y) && !ellipse(32075.060547, 24622.244629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29601.996200, 34231.342000, 1416.352041, 1416.352041, 0.000000, X, Y) && !ellipse(28045.387177, 30492.174561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30986.334000, 35073.866000, 1072.712031, 1072.712031, 0.000000, X, Y) && !ellipse(30634.885040, 35866.174225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30675.723080, 35391.069000, 1369.304039, 1369.304039, 0.000000, X, Y) && !ellipse(31731.448000, 34628.070000, 1735.280050, 1735.280050, 0.000000, X, Y) && !ellipse(32179.836000, 34281.142000, 1720.120049, 1720.120049, 0.000000, X, Y) && !ellipse(30195.562000, 34639.816000, 3145.248091, 3145.248091, 0.000000, X, Y) && !ellipse(29312.528000, 34079.698000, 1576.048045, 1576.048045, 0.000000, X, Y) && !ellipse(29568.139800, 33744.060000, 1572.624045, 1572.624045, 0.000000, X, Y) && !ellipse(32390.103668, 32840.893127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28263.974000, 32801.284000, 1538.320044, 1538.320044, 0.000000, X, Y) && !ellipse(33636.771160, 32049.160000, 715.034421, 715.034421, 0.000000, X, Y) && !ellipse(14486.313187, 32055.118622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31063.234192, 31398.317474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28918.206818, 30671.391693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34895.616000, 30672.842000, 1674.328048, 1674.328048, 0.000000, X, Y) && !ellipse(35096.463400, 30201.232000, 1709.560049, 1709.560049, 0.000000, X, Y) && !ellipse(34761.188000, 30290.414000, 3194.480092, 3194.480092, 0.000000, X, Y) && !ellipse(34087.554000, 29125.337600, 1597.240046, 1597.240046, 0.000000, X, Y) && !ellipse(33655.297920, 27775.896000, 3084.368089, 3084.368089, 0.000000, X, Y) && !ellipse(34381.994263, 27446.306366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33695.196000, 27009.510000, 1542.184044, 1542.184044, 0.000000, X, Y) && !ellipse(33849.780365, 26475.778992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33370.459961, 26050.889343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23790.372400, 25404.646000, 1181.192034, 453.841613, 50.673500, X, Y) && !ellipse(34144.789060, 25478.086000, 1008.632029, 1008.632029, 0.000000, X, Y) && !ellipse(33559.013400, 25071.898000, 1280.752037, 1280.752037, 0.000000, X, Y) && !ellipse(34131.624260, 25235.238000, 868.000025, 868.000025, 0.000000, X, Y) && !ellipse(24085.825200, 25161.985400, 2391.328069, 1579.656045, 80.969720, X, Y) && !ellipse(24005.629757, 25167.185940, 2391.328069, 1670.908124, 84.360887, X, Y) && !ellipse(26288.579600, 24415.664000, 1149.296033, 1149.296033, 0.000000, X, Y) && !ellipse(26352.438000, 24280.474000, 1042.840030, 1042.840030, 0.000000, X, Y) && !ellipse(24338.915400, 24041.578360, 706.797620, 706.797620, 0.000000, X, Y) && !ellipse(32502.140000, 20670.864400, 1610.112046, 893.984026, 230.374639, X, Y) && !ellipse(20472.097977, 14346.974594, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 10:57:17 2011] Writing fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src29.gif
[Tue Nov 29 12:25:58 2011] Mean detx,y = (1993.35, -4294.76) 
[Tue Nov 29 12:26:09 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 12:39:09 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 12:39:09 2011] Setting source spectrum file to fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Nov 29 12:39:09 2011] Setting bgd. spectrum file to fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed Nov 30 22:34:47 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:47 2011] Error reading totcts from fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Nov 30 22:34:50 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:50 2011] Using photon index=1.80, rate=0.113, arf fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src29.arf
[Wed Nov 30 22:34:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:50 2011] Updating source flux to 3.9e-13
[Wed Nov 30 22:46:01 2011] Flag c found in src. 29 procflags, skipping spectral fitting