[Sun Nov 27 22:42:05 2011] Detection parameters:
  Position = (342.5, 397.0) = 18 1 35.43 -23 12 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 192.6 +/- 19.6
  Background counts = 66.1
  Rate = 0.02 +/- 0.002

[Sun Nov 27 22:42:08 2011] Off-axis axis estimate = 7.83'
[Sun Nov 27 22:47:51 2011] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 22:47:51 2011] Initial guess for spatial extent in simple fitting = 10.34"
[Sun Nov 27 22:47:51 2011] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.725
[Sun Nov 27 22:47:51 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 10.34"
[Mon Nov 28 06:30:01 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src17.ximg exists
[Mon Nov 28 06:30:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src17.csv
[Mon Nov 28 06:30:01 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Nov 28 06:30:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src17.csv
[Mon Nov 28 06:30:01 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 06:30:02 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Nov 28 06:30:02 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Nov 28 06:30:02 2011] Fit fullrun_pn_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Nov 28 17:19:13 2011] Spatial fit model total counts = 1037.250000, observed total counts = 1046.000000
[Mon Nov 28 17:19:13 2011] Offset between fit and detection position for source 19 = 3.395660 pixels
[Mon Nov 28 17:19:13 2011] 873.030703 total counts/ 0.515703 bgd. counts: snr = 1214.991034
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 3.395660 pixels
  Position = (340.8, 394.0) = 18 1 35.96 -23 12 31.1
  Extent = 17.7 (16.5-19.4)", rotation angle = 0
  Source counts = 872.5 +/- 29.5
  Background counts = 0.5
  Rate = 0.05 +/- 0.002
[Mon Nov 28 17:19:15 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:19:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:19:15 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 17:19:15 2011] Source does appear to be extended
[Mon Nov 28 17:19:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 17:19:15 2011] Source is confused with source 30
[Mon Nov 28 17:19:15 2011] Source is confused with source 31
[Mon Nov 28 17:20:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 17:20:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 17:20:14 2011] Initial guess for spatial extent in simple fitting = 17.70"
[Mon Nov 28 17:20:14 2011] source mask rpix=4.1, npix_max = 83, mask sum = 80, frac = 0.958
[Mon Nov 28 17:20:14 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 17.70"
[Tue Nov 29 01:54:47 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src15.ximg exists
[Tue Nov 29 01:54:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src15.csv
[Tue Nov 29 01:54:47 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Nov 29 01:54:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src15.csv
[Tue Nov 29 01:54:47 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 01:54:50 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Nov 29 01:54:50 2011] fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Nov 29 01:54:50 2011] Fit fullrun_pn_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Nov 29 10:56:28 2011] Warning, spatial fit 15 centroid is now closest to src. 21
[Tue Nov 29 10:56:28 2011] Source 19 is offset by 0.531106 and -4.858529 pixels which is larger than
2 X fitted extent = 4.704966 x 4.704966, not incorporating fit results
[Tue Nov 29 10:56:28 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 10:56:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 10:56:28 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 10:56:28 2011] Source does appear to be extended
[Tue Nov 29 10:56:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 10:57:17 2011] XMMSAS src. selection expression = ellipse(29601.996200, 34231.342000, 1062.264031, 1062.264031, 0.000000, X, Y)
[Tue Nov 29 10:57:17 2011] Writing source region out to fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src19_src.reg
[Tue Nov 29 10:57:17 2011] Extracting stamp from image fullrun_pn_xmm0145970101_pi300-10000_cl_sm2.00.img.gz, (280, 333) - (402, 455)
[Tue Nov 29 10:57:17 2011] XMMSAS bgd. selection expression = annulus(29601.996200, 34231.342000, 1770.440051, 3540.880102, X, Y) && !ellipse(28322.128000, 31007.232000, 1365.104039, 1365.104039, 0.000000, X, Y) && !ellipse(26306.828980, 29866.280000, 1040.264030, 1040.264030, 0.000000, X, Y) && !ellipse(33247.802000, 33558.294000, 3434.640099, 3434.640099, 0.000000, X, Y) && !ellipse(28347.182200, 31396.564000, 2506.504072, 1210.104035, 104.799800, X, Y) && !ellipse(28045.387177, 30492.174561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30986.334000, 35073.866000, 1072.712031, 1072.712031, 0.000000, X, Y) && !ellipse(30634.885040, 35866.174225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30675.723080, 35391.069000, 1369.304039, 1369.304039, 0.000000, X, Y) && !ellipse(31731.448000, 34628.070000, 1735.280050, 1735.280050, 0.000000, X, Y) && !ellipse(32179.836000, 34281.142000, 1720.120049, 1720.120049, 0.000000, X, Y) && !ellipse(30195.562000, 34639.816000, 3145.248091, 3145.248091, 0.000000, X, Y) && !ellipse(28765.646000, 32839.964000, 3152.096091, 3152.096091, 0.000000, X, Y) && !ellipse(29312.528000, 34079.698000, 1576.048045, 1576.048045, 0.000000, X, Y) && !ellipse(29568.139800, 33744.060000, 1572.624045, 1572.624045, 0.000000, X, Y) && !ellipse(32390.103668, 32840.893127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28263.974000, 32801.284000, 1538.320044, 1538.320044, 0.000000, X, Y) && !ellipse(33636.771160, 32049.160000, 715.034421, 715.034421, 0.000000, X, Y) && !ellipse(31063.234192, 31398.317474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28918.206818, 30671.391693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34761.188000, 30290.414000, 3194.480092, 3194.480092, 0.000000, X, Y) && !ellipse(34087.554000, 29125.337600, 1597.240046, 1597.240046, 0.000000, X, Y) && !ellipse(33655.297920, 27775.896000, 3084.368089, 3084.368089, 0.000000, X, Y)
[Tue Nov 29 10:57:17 2011] Writing fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src19.gif
[Tue Nov 29 12:03:26 2011] Mean detx,y = (2624.20, -6778.02) 
[Tue Nov 29 12:03:32 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 12:04:10 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 12:04:11 2011] Setting source spectrum file to fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Nov 29 12:04:11 2011] Setting bgd. spectrum file to fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Nov 30 22:34:47 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:47 2011] Error reading totcts from fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Nov 30 22:34:49 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:49 2011] Using photon index=1.80, rate=0.0459, arf fullrun_pn_xmm0145970101_pi300-10000_pass1_cl_src19.arf
[Wed Nov 30 22:34:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:49 2011] Updating source flux to 2.2e-13
[Wed Nov 30 22:46:01 2011] Flag b found in src. 19 procflags, skipping spectral fitting
[Wed Nov 30 22:46:01 2011] Flag c found in src. 19 procflags, skipping spectral fitting