[Sun Nov 27 22:43:57 2011] Detection parameters: Position = (303.7, 306.0) = 18 1 47.65 -23 18 52.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 175.2 +/- 20.3 Background counts = 45.5 Rate = 0.008 +/- 0.0009 [Sun Nov 27 22:43:59 2011] Off-axis axis estimate = 0.67' [Mon Nov 28 12:06:13 2011] Using EEF radius (= 6.76 ")to estimate initial spatial extent for simple fitting [Mon Nov 28 12:06:13 2011] Initial guess for spatial extent in simple fitting = 6.76" [Mon Nov 28 12:06:13 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.947 [Mon Nov 28 12:06:13 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 6.76" [Mon Nov 28 17:18:41 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src7.ximg exists [Mon Nov 28 17:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src7.csv [Mon Nov 28 17:18:41 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src7_1.ximg exists [Mon Nov 28 17:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src7.csv [Mon Nov 28 17:18:41 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src7_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Nov 28 17:18:42 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists [Mon Nov 28 17:18:42 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists [Mon Nov 28 17:18:42 2011] Fit fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly [Mon Nov 28 17:19:49 2011] Warning, spatial fit 7 centroid is now closest to src. 11 [Mon Nov 28 17:19:49 2011] Spatial fit model total counts = 1467.050000, observed total counts = 1465.000000 [Mon Nov 28 17:19:49 2011] Offset between fit and detection position for source 8 = 0.476030 pixels [Mon Nov 28 17:19:49 2011] Warning, changing simple spatial fit ID from 7 to 8 [Mon Nov 28 17:19:49 2011] 1438.672900 total counts/ 1403.460000 bgd. counts: snr = 0.939944 Spatial fit parameters: Offset between fit and detection position for source 8 = 0.476030 pixels Position = (304.0, 306.4) = 18 1 47.58 -23 18 52.2 Extent = 7.1 (3.1-13.8)", rotation angle = 132 (113-150) degrees Source counts = 35.2 +/- 37.9 Background counts = 1403.5 Rate = 0.002 +/- 0.002 Deleting source due to low Poisson probability