[Sun Nov 27 22:43:59 2011] Detection parameters:
  Position = (284.7, 289.8) = 18 1 53.66 -23 20 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.6 +/- 12.0
  Background counts = 23.8
  Rate = 0.003 +/- 0.0006

[Sun Nov 27 22:43:59 2011] Off-axis axis estimate = 1.17'
[Mon Nov 28 12:06:14 2011] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 12:06:14 2011] Initial guess for spatial extent in simple fitting = 7.02"
[Mon Nov 28 12:06:14 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.896
[Mon Nov 28 12:06:14 2011] Giving source the simple spatial ID 40 for pass 0, mean size = 7.02"
[Mon Nov 28 17:18:41 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src40.ximg exists
[Mon Nov 28 17:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src40.csv
[Mon Nov 28 17:18:41 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src40_1.ximg exists
[Mon Nov 28 17:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src40.csv
[Mon Nov 28 17:18:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 17:18:43 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Mon Nov 28 17:18:43 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Mon Nov 28 17:18:43 2011] Fit fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Mon Nov 28 17:19:49 2011] Warning, spatial fit 40 centroid is now closest to src. 43
[Mon Nov 28 17:19:49 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:19:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:19:49 2011] Assessing source extent using major
[Mon Nov 28 17:19:49 2011] Source does appear to be extended
[Mon Nov 28 17:19:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 17:19:49 2011] Source is confused with source 17
[Tue Nov 29 06:27:52 2011] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 06:27:52 2011] Initial guess for spatial extent in simple fitting = 7.02"
[Tue Nov 29 06:27:52 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.896
[Tue Nov 29 06:27:52 2011] Giving source the simple spatial ID 34 for pass 1, mean size = 7.02"
[Tue Nov 29 10:56:04 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src34.ximg exists
[Tue Nov 29 10:56:04 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src34_1.ximg exists
[Tue Nov 29 10:56:04 2011] Fit fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src34 appears to have run properly
[Tue Nov 29 10:56:06 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Tue Nov 29 10:56:06 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Tue Nov 29 10:56:06 2011] Fit fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Tue Nov 29 10:56:52 2011] Source 45 is offset by 4.118347 and -0.629620 pixels which is larger than
2 X fitted extent = 0.906405 x 0.906405, not incorporating fit results
[Tue Nov 29 10:56:52 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 10:56:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 10:56:52 2011] Assessing source extent using major
[Tue Nov 29 10:56:52 2011] Source does appear to be extended
[Tue Nov 29 10:56:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 21:00:36 2011] XMMSAS src. selection expression = ellipse(24721.508209, 25165.678680, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Nov 30 21:00:36 2011] Writing source region out to fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src45_src.reg
[Wed Nov 30 21:00:36 2011] Extracting stamp from image fullrun_mos2_xmm0145970101_pi300-10000_cl_sm2.00.img.gz, (247, 252) - (322, 327)
[Wed Nov 30 21:00:36 2011] XMMSAS bgd. selection expression = annulus(24721.508209, 25165.678680, 1087.500000, 2175.000000, X, Y) && !ellipse(27040.906397, 27478.938388, 2275.280065, 1773.888765, 82.776456, X, Y) && !ellipse(25815.409400, 26366.494600, 535.535215, 535.535215, 0.000000, X, Y) && !ellipse(26850.276184, 26490.694946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.930000, 26374.798000, 2151.904062, 2151.904062, 0.000000, X, Y) && !ellipse(26723.138140, 28739.124000, 1942.704056, 1942.704056, 0.000000, X, Y) && !ellipse(26709.758600, 28028.159200, 971.352028, 971.352028, 0.000000, X, Y) && !ellipse(25630.205400, 25566.032000, 1708.928049, 1708.928049, 0.000000, X, Y) && !ellipse(25632.142000, 25241.342000, 1927.744055, 1927.744055, 0.000000, X, Y) && !ellipse(26834.258392, 25122.414978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26195.586600, 24720.594000, 1085.512031, 1085.512031, 0.000000, X, Y) && !ellipse(26091.593597, 27409.698822, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 21:00:36 2011] Writing fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src45.gif
[Wed Nov 30 21:16:17 2011] Mean detx,y = (2290.33, -2409.82) 
[Wed Nov 30 21:16:19 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 21:16:28 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 21:16:28 2011] Setting source spectrum file to fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed Nov 30 21:16:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Wed Nov 30 22:34:03 2011] Not generating rmf since there are only 55 counts
[Wed Nov 30 22:34:03 2011] rmf not generated due to insufficient counts
[Wed Nov 30 22:34:57 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:57 2011] Error reading totcts from fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed Nov 30 22:34:59 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:59 2011] Using photon index=1.80, rate=0.00276, arf fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src45.arf
[Wed Nov 30 22:34:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:59 2011] Updating source flux to 3.3e-14
[Wed Nov 30 22:40:33 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting