[Sun Nov 27 22:43:58 2011] Detection parameters:
  Position = (296.1, 280.1) = 18 1 50.05 -23 20 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.8 +/- 13.4
  Background counts = 27.2
  Rate = 0.004 +/- 0.0007

[Sun Nov 27 22:43:59 2011] Off-axis axis estimate = 1.34'
[Mon Nov 28 12:06:14 2011] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 12:06:14 2011] Initial guess for spatial extent in simple fitting = 7.10"
[Mon Nov 28 12:06:14 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.880
[Mon Nov 28 12:06:14 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 7.10"
[Mon Nov 28 17:18:41 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src31.ximg exists
[Mon Nov 28 17:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src31.csv
[Mon Nov 28 17:18:41 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Nov 28 17:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src31.csv
[Mon Nov 28 17:18:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 17:18:43 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Nov 28 17:18:43 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Nov 28 17:18:43 2011] Fit fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Mon Nov 28 17:19:49 2011] Spatial fit model total counts = 648.900000, observed total counts = 649.000000
[Mon Nov 28 17:19:49 2011] Offset between fit and detection position for source 36 = 0.677571 pixels
[Mon Nov 28 17:19:49 2011] 633.372000 total counts/ 610.990000 bgd. counts: snr = 0.905486
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.677571 pixels
  Position = (296.2, 279.4) = 18 1 50.02 -23 20 49.7
  Extent = 4.1 (1.8-8.3)", rotation angle = 0
  Source counts = 22.4 +/- 25.2
  Background counts = 611.0
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability