[Sun Nov 27 22:43:57 2011] Detection parameters:
  Position = (301.5, 341.1) = 18 1 48.38 -23 16 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 228.3 +/- 21.9
  Background counts = 41.9
  Rate = 0.01 +/- 0.001

[Sun Nov 27 22:43:59 2011] Off-axis axis estimate = 3.10'
[Mon Nov 28 12:06:13 2011] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 12:06:13 2011] Initial guess for spatial extent in simple fitting = 7.98"
[Mon Nov 28 12:06:13 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.918
[Mon Nov 28 12:06:13 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.98"
[Mon Nov 28 17:18:41 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Nov 28 17:18:41 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src3.csv
[Mon Nov 28 17:18:41 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Nov 28 17:18:41 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src3.csv
[Mon Nov 28 17:18:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 17:18:42 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Nov 28 17:18:42 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Nov 28 17:18:42 2011] Fit fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Nov 28 17:19:49 2011] Spatial fit model total counts = 1340.550000, observed total counts = 1338.000000
[Mon Nov 28 17:19:49 2011] Offset between fit and detection position for source 3 = 1.251570 pixels
[Mon Nov 28 17:19:49 2011] 1265.654000 total counts/ 1008.110000 bgd. counts: snr = 8.111431
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.251570 pixels
  Position = (302.0, 342.2) = 18 1 48.21 -23 16 16.4
  Extent = 13.0 (9.9-16.0)", rotation angle = 0
  Source counts = 257.5 +/- 35.6
  Background counts = 1008.1
  Rate = 0.01 +/- 0.002
[Mon Nov 28 17:19:49 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:19:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:19:49 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 17:19:49 2011] Source does appear to be extended
[Mon Nov 28 17:19:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 17:19:49 2011] Source is confused with source 2
[Tue Nov 29 06:27:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov 29 06:27:52 2011] Initial guess for spatial extent in simple fitting = 12.96"
[Tue Nov 29 06:27:52 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.011
[Tue Nov 29 06:27:52 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 12.96"
[Tue Nov 29 10:56:04 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Nov 29 10:56:04 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Nov 29 10:56:04 2011] Fit fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src3 appears to have run properly
[Tue Nov 29 10:56:05 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Nov 29 10:56:05 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Nov 29 10:56:05 2011] Fit fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Nov 29 10:56:52 2011] Warning, spatial fit 3 centroid is now closest to src. 23
[Tue Nov 29 10:56:52 2011] Spatial fit model total counts = 971.055000, observed total counts = 1338.000000
[Tue Nov 29 10:56:52 2011] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Nov 29 10:56:52 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 10:56:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 10:56:52 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 10:56:52 2011] Source does appear to be extended
[Tue Nov 29 10:56:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 21:00:35 2011] XMMSAS src. selection expression = ellipse(26223.088200, 29724.550220, 777.888022, 777.888022, 0.000000, X, Y)
[Wed Nov 30 21:00:35 2011] Writing source region out to fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src3_src.reg
[Wed Nov 30 21:00:35 2011] Extracting stamp from image fullrun_mos2_xmm0145970101_pi300-10000_cl_sm2.00.img.gz, (257, 298) - (347, 387)
[Wed Nov 30 21:00:35 2011] XMMSAS bgd. selection expression = annulus(26223.088200, 29724.550220, 1296.480037, 2592.960075, X, Y) && !ellipse(26658.314600, 30093.733600, 1307.896038, 1307.896038, 0.000000, X, Y) && !ellipse(27040.906397, 27478.938388, 2275.280065, 1773.888765, 82.776456, X, Y) && !ellipse(26850.276184, 26490.694946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.930000, 26374.798000, 2151.904062, 2151.904062, 0.000000, X, Y) && !ellipse(26157.876901, 29630.691848, 1186.787054, 679.647864, 289.163815, X, Y) && !ellipse(26723.138140, 28739.124000, 1942.704056, 1942.704056, 0.000000, X, Y) && !ellipse(26709.758600, 28028.159200, 971.352028, 971.352028, 0.000000, X, Y) && !ellipse(25630.205400, 25566.032000, 1708.928049, 1708.928049, 0.000000, X, Y) && !ellipse(28168.137146, 30744.617401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25632.142000, 25241.342000, 1927.744055, 1927.744055, 0.000000, X, Y) && !ellipse(28321.202800, 31082.046000, 1383.816040, 1383.816040, 0.000000, X, Y) && !ellipse(26091.593597, 27409.698822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29328.604000, 33744.396000, 1666.200048, 1666.200048, 0.000000, X, Y)
[Wed Nov 30 21:00:35 2011] Writing fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src3.gif
[Wed Nov 30 21:01:26 2011] Mean detx,y = (794.32, 2171.47) 
[Wed Nov 30 21:01:28 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 21:01:39 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 21:01:39 2011] Setting source spectrum file to fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Nov 30 21:01:39 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Nov 30 22:34:56 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:56 2011] Error reading totcts from fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Nov 30 22:34:57 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:57 2011] Using photon index=1.80, rate=0.0119, arf fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src3.arf
[Wed Nov 30 22:34:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:57 2011] Updating source flux to 1.4e-13
[Wed Nov 30 22:40:33 2011] Flag p found in src. 3 procflags, skipping spectral fitting
[Wed Nov 30 22:40:33 2011] Flag c found in src. 3 procflags, skipping spectral fitting