[Sun Nov 27 22:43:58 2011] Detection parameters:
  Position = (301.1, 289.0) = 18 1 48.48 -23 20 6.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.6 +/- 15.7
  Background counts = 34.2
  Rate = 0.004 +/- 0.0008

[Sun Nov 27 22:43:59 2011] Off-axis axis estimate = 0.71'
[Mon Nov 28 12:06:13 2011] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 12:06:13 2011] Initial guess for spatial extent in simple fitting = 6.78"
[Mon Nov 28 12:06:13 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.943
[Mon Nov 28 12:06:13 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 6.78"
[Mon Nov 28 17:18:41 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src27.ximg exists
[Mon Nov 28 17:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src27.csv
[Mon Nov 28 17:18:41 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Nov 28 17:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src27.csv
[Mon Nov 28 17:18:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 17:18:43 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Nov 28 17:18:43 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Nov 28 17:18:43 2011] Fit fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Nov 28 17:19:49 2011] Spatial fit model total counts = 919.464000, observed total counts = 920.000000
[Mon Nov 28 17:19:49 2011] Offset between fit and detection position for source 27 = 4.324526 pixels
[Mon Nov 28 17:19:49 2011] 922.808400 total counts/ 841.718000 bgd. counts: snr = 2.795028
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 4.324526 pixels
  Position = (301.7, 284.7) = 18 1 48.31 -23 20 26.6
  Extent = 13.6 (13.5-27.1)", rotation angle = 0
  Source counts = 81.1 +/- 30.4
  Background counts = 841.7
  Rate = 0.004 +/- 0.001
[Mon Nov 28 17:19:49 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:19:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:19:49 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 17:19:49 2011] Source does appear to be extended
[Mon Nov 28 17:19:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 17:19:49 2011] Source is confused with source 25
[Tue Nov 29 06:27:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov 29 06:27:52 2011] Initial guess for spatial extent in simple fitting = 13.57"
[Tue Nov 29 06:27:52 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.935
[Tue Nov 29 06:27:52 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 13.57"
[Tue Nov 29 10:56:04 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src25.ximg exists
[Tue Nov 29 10:56:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src25.csv
[Tue Nov 29 10:56:04 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue Nov 29 10:56:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src25.csv
[Tue Nov 29 10:56:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 10:56:06 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue Nov 29 10:56:06 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Nov 29 10:56:06 2011] Fit fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Tue Nov 29 10:56:52 2011] Warning, spatial fit 25 centroid is now closest to src. 17
[Tue Nov 29 10:56:52 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 10:56:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 10:56:52 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 10:56:52 2011] Source does appear to be extended
[Tue Nov 29 10:56:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 21:00:36 2011] XMMSAS src. selection expression = ellipse(26195.586600, 24720.594000, 814.134023, 814.134023, 0.000000, X, Y)
[Wed Nov 30 21:00:36 2011] Writing source region out to fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src27_src.reg
[Wed Nov 30 21:00:36 2011] Extracting stamp from image fullrun_mos2_xmm0145970101_pi300-10000_cl_sm2.00.img.gz, (255, 238) - (348, 331)
[Wed Nov 30 21:00:36 2011] XMMSAS bgd. selection expression = annulus(26195.586600, 24720.594000, 1356.890039, 2713.780078, X, Y) && !ellipse(27040.906397, 27478.938388, 2275.280065, 1773.888765, 82.776456, X, Y) && !ellipse(25815.409400, 26366.494600, 535.535215, 535.535215, 0.000000, X, Y) && !ellipse(26850.276184, 26490.694946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.930000, 26374.798000, 2151.904062, 2151.904062, 0.000000, X, Y) && !ellipse(26723.138140, 28739.124000, 1942.704056, 1942.704056, 0.000000, X, Y) && !ellipse(26709.758600, 28028.159200, 971.352028, 971.352028, 0.000000, X, Y) && !ellipse(25630.205400, 25566.032000, 1708.928049, 1708.928049, 0.000000, X, Y) && !ellipse(25632.142000, 25241.342000, 1927.744055, 1927.744055, 0.000000, X, Y) && !ellipse(26834.258392, 25122.414978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26091.593597, 27409.698822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24721.508209, 25165.678680, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 21:00:36 2011] Writing fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src27.gif
[Wed Nov 30 21:12:26 2011] Mean detx,y = (947.41, -2746.79) 
[Wed Nov 30 21:12:28 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 21:12:43 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 21:12:44 2011] Setting source spectrum file to fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Nov 30 21:12:44 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed Nov 30 22:29:01 2011] Not generating rmf since there are only 81 counts
[Wed Nov 30 22:29:01 2011] rmf not generated due to insufficient counts
[Wed Nov 30 22:34:57 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:57 2011] Error reading totcts from fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Nov 30 22:34:58 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:58 2011] Using photon index=1.80, rate=0.00376, arf fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src27.arf
[Wed Nov 30 22:34:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:58 2011] Updating source flux to 4.2e-14
[Wed Nov 30 22:40:33 2011] Flag c found in src. 27 procflags, skipping spectral fitting
[Wed Nov 30 22:40:33 2011] Source 27 has fewer than 100.000000 counts, skipping spectral fitting