[Sun Nov 27 22:43:58 2011] Detection parameters:
  Position = (309.0, 289.3) = 18 1 45.99 -23 19 59.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.2 +/- 15.5
  Background counts = 35.5
  Rate = 0.005 +/- 0.0009

[Sun Nov 27 22:43:59 2011] Off-axis axis estimate = 1.01'
[Mon Nov 28 12:06:13 2011] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 12:06:13 2011] Initial guess for spatial extent in simple fitting = 6.93"
[Mon Nov 28 12:06:13 2011] source mask rpix=1.6, npix_max = 17, mask sum = 14, frac = 0.798
[Mon Nov 28 12:06:13 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 6.93"
[Mon Nov 28 17:18:41 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src23.ximg exists
[Mon Nov 28 17:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src23.csv
[Mon Nov 28 17:18:41 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src23_1.ximg exists
[Mon Nov 28 17:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src23.csv
[Mon Nov 28 17:18:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 17:18:43 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Mon Nov 28 17:18:43 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Nov 28 17:18:43 2011] Fit fullrun_mos2_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Mon Nov 28 17:19:49 2011] Source 25 is offset by -0.443481 and -4.827552 pixels which is larger than
2 X fitted extent = 4.491945 x 4.491945, not incorporating fit results
[Mon Nov 28 17:19:49 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:19:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:19:49 2011] Assessing source extent using major
[Mon Nov 28 17:19:49 2011] Source does appear to be extended
[Mon Nov 28 17:19:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 17:19:49 2011] Source is confused with source 27
[Tue Nov 29 06:27:52 2011] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 06:27:52 2011] Initial guess for spatial extent in simple fitting = 6.93"
[Tue Nov 29 06:27:52 2011] source mask rpix=1.6, npix_max = 17, mask sum = 14, frac = 0.798
[Tue Nov 29 06:27:52 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 6.93"
[Tue Nov 29 10:56:04 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src22.ximg exists
[Tue Nov 29 10:56:04 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src22_1.ximg exists
[Tue Nov 29 10:56:04 2011] Fit fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_src22 appears to have run properly
[Tue Nov 29 10:56:05 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Tue Nov 29 10:56:05 2011] fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Tue Nov 29 10:56:05 2011] Fit fullrun_mos2_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Tue Nov 29 10:56:52 2011] Source 25 is offset by -0.376747 and -4.310357 pixels which is larger than
2 X fitted extent = 0.859600 x 0.859600, not incorporating fit results
[Tue Nov 29 10:56:52 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 10:56:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 10:56:52 2011] Assessing source extent using major
[Tue Nov 29 10:56:52 2011] Source does appear to be extended
[Tue Nov 29 10:56:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 21:00:35 2011] XMMSAS src. selection expression = ellipse(26834.258392, 25122.414978, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Nov 30 21:00:35 2011] Writing source region out to fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src25_src.reg
[Wed Nov 30 21:00:35 2011] Extracting stamp from image fullrun_mos2_xmm0145970101_pi300-10000_cl_sm2.00.img.gz, (271, 252) - (346, 327)
[Wed Nov 30 21:00:35 2011] XMMSAS bgd. selection expression = annulus(26834.258392, 25122.414978, 1087.500000, 2175.000000, X, Y) && !ellipse(27040.906397, 27478.938388, 2275.280065, 1773.888765, 82.776456, X, Y) && !ellipse(25815.409400, 26366.494600, 535.535215, 535.535215, 0.000000, X, Y) && !ellipse(26850.276184, 26490.694946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.930000, 26374.798000, 2151.904062, 2151.904062, 0.000000, X, Y) && !ellipse(26723.138140, 28739.124000, 1942.704056, 1942.704056, 0.000000, X, Y) && !ellipse(26709.758600, 28028.159200, 971.352028, 971.352028, 0.000000, X, Y) && !ellipse(25630.205400, 25566.032000, 1708.928049, 1708.928049, 0.000000, X, Y) && !ellipse(25632.142000, 25241.342000, 1927.744055, 1927.744055, 0.000000, X, Y) && !ellipse(26195.586600, 24720.594000, 1085.512031, 1085.512031, 0.000000, X, Y) && !ellipse(26091.593597, 27409.698822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24721.508209, 25165.678680, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 21:00:35 2011] Writing fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src25.gif
[Wed Nov 30 21:11:49 2011] Mean detx,y = (307.89, -2352.77) 
[Wed Nov 30 21:11:51 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 21:12:05 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 21:12:05 2011] Setting source spectrum file to fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Nov 30 21:12:05 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed Nov 30 22:28:49 2011] Not generating rmf since there are only 84 counts
[Wed Nov 30 22:28:49 2011] rmf not generated due to insufficient counts
[Wed Nov 30 22:34:57 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:57 2011] Error reading totcts from fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Nov 30 22:34:58 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:58 2011] Using photon index=1.80, rate=0.00468, arf fullrun_mos2_xmm0145970101_pi300-10000_pass1_cl_src25.arf
[Wed Nov 30 22:34:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:58 2011] Updating source flux to 6.1e-14
[Wed Nov 30 22:40:33 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting