[Sun Nov 27 22:42:56 2011] Detection parameters:
  Position = (358.9, 405.7) = 18 1 30.25 -23 11 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.1 +/- 11.1
  Background counts = 19.0
  Rate = 0.004 +/- 0.0008

[Sun Nov 27 22:42:58 2011] Off-axis axis estimate = 8.93'
[Mon Nov 28 06:30:03 2011] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 06:30:03 2011] Initial guess for spatial extent in simple fitting = 10.89"
[Mon Nov 28 06:30:03 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.997
[Mon Nov 28 06:30:03 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 10.89"
[Mon Nov 28 12:06:12 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src33.ximg exists
[Mon Nov 28 12:06:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src33.csv
[Mon Nov 28 12:06:12 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Nov 28 12:06:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src33.csv
[Mon Nov 28 12:06:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 12:06:13 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Nov 28 12:06:13 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Nov 28 12:06:13 2011] Fit fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Mon Nov 28 17:19:32 2011] Source 9 is offset by -4.567814 and -7.116447 pixels which is larger than
2 X fitted extent = 1.233485 x 1.233485, not incorporating fit results
[Mon Nov 28 17:19:32 2011] Warning, spatial fit 33 centroid is now closest to src. 10
[Mon Nov 28 17:19:32 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:19:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:19:32 2011] Assessing source extent using major
[Mon Nov 28 17:19:32 2011] Source does appear to be extended
[Mon Nov 28 17:19:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 17:19:32 2011] Source is confused with source 10
[Mon Nov 28 17:19:32 2011] Source is confused with source 12
[Mon Nov 28 17:19:32 2011] Source is confused with source 8
[Tue Nov 29 01:54:51 2011] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 01:54:51 2011] Initial guess for spatial extent in simple fitting = 10.89"
[Tue Nov 29 01:54:51 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.997
[Tue Nov 29 01:54:51 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 10.89"
[Tue Nov 29 06:27:50 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src30.ximg exists
[Tue Nov 29 06:27:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src30.csv
[Tue Nov 29 06:27:50 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src30_1.ximg exists
[Tue Nov 29 06:27:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src30.csv
[Tue Nov 29 06:27:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 06:27:51 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Tue Nov 29 06:27:51 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Nov 29 06:27:51 2011] Fit fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Tue Nov 29 10:56:41 2011] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.416870 pixels away
[Tue Nov 29 10:56:41 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 10:56:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 10:56:41 2011] Assessing source extent using major
[Tue Nov 29 10:56:41 2011] Source does appear to be extended
[Tue Nov 29 10:56:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 18:34:07 2011] XMMSAS src. selection expression = ellipse(31177.618164, 35249.971130, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Nov 30 18:34:07 2011] Writing source region out to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src9_src.reg
[Wed Nov 30 18:34:07 2011] Extracting stamp from image fullrun_mos1_xmm0145970101_pi300-10000_cl_sm2.00.img.gz, (321, 368) - (396, 443)
[Wed Nov 30 18:34:07 2011] XMMSAS bgd. selection expression = annulus(31177.618164, 35249.971130, 1087.500000, 2175.000000, X, Y) && !ellipse(33973.340118, 33606.428345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29840.166000, 34536.936000, 1237.896036, 1237.896036, 0.000000, X, Y) && !ellipse(30746.174000, 35091.258000, 1742.936050, 1742.936050, 0.000000, X, Y) && !ellipse(30195.290040, 34665.290800, 3236.784093, 1518.424044, 323.506000, X, Y) && !ellipse(29072.790000, 33659.728000, 2451.664071, 2451.664071, 0.000000, X, Y) && !ellipse(30741.019836, 34502.328156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28612.090000, 31110.314000, 2790.928080, 2790.928080, 0.000000, X, Y) && !ellipse(30275.532000, 35049.514000, 1743.792050, 1743.792050, 0.000000, X, Y)
[Wed Nov 30 18:34:07 2011] Writing fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src9.gif
[Wed Nov 30 19:04:26 2011] Mean detx,y = (7874.10, 3842.69) 
[Wed Nov 30 19:04:29 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 19:04:51 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 19:04:51 2011] Setting source spectrum file to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Nov 30 19:04:51 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed Nov 30 20:50:34 2011] Not generating rmf since there are only 49 counts
[Wed Nov 30 20:50:34 2011] rmf not generated due to insufficient counts
[Wed Nov 30 22:34:53 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:53 2011] Error reading totcts from fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Nov 30 22:34:55 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:55 2011] Using photon index=1.80, rate=0.00354, arf fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src9.arf
[Wed Nov 30 22:34:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:55 2011] Updating source flux to 6.2e-14
[Wed Nov 30 22:35:00 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting