[Sun Nov 27 22:42:57 2011] Detection parameters:
  Position = (309.0, 302.0) = 18 1 46.00 -23 19 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.2 +/- 19.5
  Background counts = 40.3
  Rate = 0.007 +/- 0.0009

[Sun Nov 27 22:42:58 2011] Off-axis axis estimate = 0.81'
[Mon Nov 28 06:30:03 2011] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 06:30:03 2011] Initial guess for spatial extent in simple fitting = 6.83"
[Mon Nov 28 06:30:03 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.933
[Mon Nov 28 06:30:03 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 6.83"
[Mon Nov 28 12:06:11 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src11.ximg exists
[Mon Nov 28 12:06:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src11.csv
[Mon Nov 28 12:06:11 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Nov 28 12:06:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src11.csv
[Mon Nov 28 12:06:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 12:06:12 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Nov 28 12:06:12 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Nov 28 12:06:12 2011] Fit fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Nov 28 17:19:32 2011] Source 34 is offset by -1.483470 and -0.479379 pixels which is larger than
2 X fitted extent = 1.454345 x 1.454345, not incorporating fit results
[Mon Nov 28 17:19:32 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:19:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:19:32 2011] Assessing source extent using major
[Mon Nov 28 17:19:32 2011] Source does appear to be extended
[Mon Nov 28 17:19:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 17:19:32 2011] Source is confused with source 33
[Tue Nov 29 01:54:51 2011] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 01:54:51 2011] Initial guess for spatial extent in simple fitting = 6.83"
[Tue Nov 29 01:54:51 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.933
[Tue Nov 29 01:54:51 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 6.83"
[Tue Nov 29 06:27:50 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src9.ximg exists
[Tue Nov 29 06:27:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src9.csv
[Tue Nov 29 06:27:50 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Nov 29 06:27:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src9.csv
[Tue Nov 29 06:27:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 06:27:51 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Nov 29 06:27:51 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Nov 29 06:27:51 2011] Fit fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Nov 29 10:56:41 2011] Spatial fit model total counts = 1277.930000, observed total counts = 1277.000000
[Tue Nov 29 10:56:41 2011] Offset between fit and detection position for source 34 = 2.092171 pixels
[Tue Nov 29 10:56:41 2011] 1279.704000 total counts/ 1149.820000 bgd. counts: snr = 3.830370
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 2.092171 pixels
  Position = (308.1, 300.1) = 18 1 46.29 -23 19 19.6
  Extent = 13.0 (11.7-13.7)", rotation angle = 0
  Source counts = 129.9 +/- 35.8
  Background counts = 1149.8
  Rate = 0.006 +/- 0.002
[Tue Nov 29 10:56:41 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 10:56:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 10:56:41 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 10:56:41 2011] Source does appear to be extended
[Tue Nov 29 10:56:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 18:34:06 2011] XMMSAS src. selection expression = ellipse(26752.710400, 26062.010000, 780.042022, 780.042022, 0.000000, X, Y)
[Wed Nov 30 18:34:06 2011] Writing source region out to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src34_src.reg
[Wed Nov 30 18:34:06 2011] Extracting stamp from image fullrun_mos1_xmm0145970101_pi300-10000_cl_sm2.00.img.gz, (263, 255) - (353, 345)
[Wed Nov 30 18:34:06 2011] XMMSAS bgd. selection expression = annulus(26752.710400, 26062.010000, 1300.070037, 2600.140075, X, Y) && !ellipse(27008.157200, 28779.728600, 1222.688035, 1222.688035, 0.000000, X, Y) && !ellipse(26575.050000, 29797.460000, 2751.696079, 1667.744048, 333.082000, X, Y) && !ellipse(25938.600000, 26147.252000, 1250.848036, 1250.848036, 0.000000, X, Y) && !ellipse(27231.318000, 26858.741200, 1107.808032, 1107.808032, 0.000000, X, Y) && !ellipse(26155.155800, 28724.842400, 1224.112035, 1224.112035, 0.000000, X, Y) && !ellipse(26212.593903, 26571.460938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27110.275238, 27788.271484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25778.358551, 25105.563507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26283.403534, 24671.229919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25795.420000, 26225.472000, 1074.536031, 1074.536031, 0.000000, X, Y) && !ellipse(24498.007840, 24954.394200, 665.804019, 665.804019, 0.000000, X, Y) && !ellipse(28612.090000, 31110.314000, 2790.928080, 2790.928080, 0.000000, X, Y) && !ellipse(26236.587402, 25096.406311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23784.986400, 25477.279600, 1181.056034, 1181.056034, 0.000000, X, Y)
[Wed Nov 30 18:34:06 2011] Writing fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src34.gif
[Wed Nov 30 18:51:58 2011] Mean detx,y = (-1183.52, -555.40) 
[Wed Nov 30 18:52:01 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 18:52:14 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 18:52:14 2011] Setting source spectrum file to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Wed Nov 30 18:52:14 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Wed Nov 30 22:34:52 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:53 2011] Error reading totcts from fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Wed Nov 30 22:34:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:54 2011] Using photon index=1.80, rate=0.00602, arf fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src34.arf
[Wed Nov 30 22:34:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:54 2011] Updating source flux to 7e-14
[Wed Nov 30 22:35:00 2011] Flag b found in src. 34 procflags, skipping spectral fitting
[Wed Nov 30 22:35:00 2011] Flag c found in src. 34 procflags, skipping spectral fitting