[Sun Nov 27 22:42:57 2011] Detection parameters:
  Position = (397.5, 351.0) = 18 1 18.06 -23 15 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.1 +/- 9.9
  Background counts = 19.1
  Rate = 0.002 +/- 0.0006

[Sun Nov 27 22:42:58 2011] Off-axis axis estimate = 8.13'
[Mon Nov 28 06:30:03 2011] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 06:30:03 2011] Initial guess for spatial extent in simple fitting = 10.49"
[Mon Nov 28 06:30:03 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.884
[Mon Nov 28 06:30:03 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 10.49"
[Mon Nov 28 12:06:12 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src41.ximg exists
[Mon Nov 28 12:06:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src41.csv
[Mon Nov 28 12:06:12 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src41_1.ximg exists
[Mon Nov 28 12:06:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src41.csv
[Mon Nov 28 12:06:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 12:06:13 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Mon Nov 28 12:06:13 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Mon Nov 28 12:06:13 2011] Fit fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Mon Nov 28 17:19:32 2011] Spatial fit model total counts = 311.982000, observed total counts = 312.000000
[Mon Nov 28 17:19:32 2011] Offset between fit and detection position for source 21 = 2.422408 pixels
[Mon Nov 28 17:19:32 2011] 310.122400 total counts/ 244.890000 bgd. counts: snr = 4.168481
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 2.422408 pixels
  Position = (395.7, 352.6) = 18 1 18.62 -23 15 31.0
  Extent = 14.2 (2.6-21.0)", rotation angle = 0
  Source counts = 65.2 +/- 17.6
  Background counts = 244.9
  Rate = 0.003 +/- 0.0008
[Mon Nov 28 17:19:32 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:19:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:19:32 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 17:19:32 2011] Source does appear to be extended
[Mon Nov 28 17:19:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 01:54:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov 29 01:54:51 2011] Initial guess for spatial extent in simple fitting = 14.18"
[Tue Nov 29 01:54:51 2011] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.866
[Tue Nov 29 01:54:51 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 14.18"
[Tue Nov 29 06:27:50 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src35.ximg exists
[Tue Nov 29 06:27:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src35.csv
[Tue Nov 29 06:27:50 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src35_1.ximg exists
[Tue Nov 29 06:27:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src35.csv
[Tue Nov 29 06:27:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 06:27:51 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Tue Nov 29 06:27:51 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Tue Nov 29 06:27:51 2011] Fit fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Tue Nov 29 10:56:41 2011] Warning, spatial fit 35 centroid is now closest to src. 5
[Tue Nov 29 10:56:41 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 10:56:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 10:56:41 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 10:56:41 2011] Source does appear to be extended
[Tue Nov 29 10:56:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 18:34:07 2011] XMMSAS src. selection expression = ellipse(34380.320800, 30629.701800, 850.992024, 850.992024, 0.000000, X, Y)
[Wed Nov 30 18:34:07 2011] Writing source region out to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src21_src.reg
[Wed Nov 30 18:34:07 2011] Extracting stamp from image fullrun_mos1_xmm0145970101_pi300-10000_cl_sm2.00.img.gz, (347, 304) - (445, 402)
[Wed Nov 30 18:34:07 2011] XMMSAS bgd. selection expression = annulus(34380.320800, 30629.701800, 1418.320041, 2836.640082, X, Y) && !ellipse(33973.340118, 33606.428345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35277.745392, 28049.470612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30746.174000, 35091.258000, 1742.936050, 1742.936050, 0.000000, X, Y) && !ellipse(30195.290040, 34665.290800, 3236.784093, 1518.424044, 323.506000, X, Y) && !ellipse(30275.532000, 35049.514000, 1743.792050, 1743.792050, 0.000000, X, Y) && !ellipse(33232.424800, 27826.964000, 1527.144044, 827.296024, 84.550200, X, Y)
[Wed Nov 30 18:34:07 2011] Writing fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src21.gif
[Wed Nov 30 19:18:48 2011] Mean detx,y = (3311.92, 7137.88) 
[Wed Nov 30 19:18:49 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 19:19:16 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 19:19:16 2011] Setting source spectrum file to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Nov 30 19:19:16 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed Nov 30 20:56:16 2011] Not generating rmf since there are only 65 counts
[Wed Nov 30 20:56:16 2011] rmf not generated due to insufficient counts
[Wed Nov 30 22:34:53 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:54 2011] Error reading totcts from fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Nov 30 22:34:55 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:55 2011] Using photon index=1.80, rate=0.00303, arf fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src21.arf
[Wed Nov 30 22:34:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:55 2011] Updating source flux to 4.6e-14
[Wed Nov 30 22:35:00 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting