[Sun Nov 27 22:42:56 2011] Detection parameters:
  Position = (307.0, 346.8) = 18 1 46.62 -23 15 55.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 243.7 +/- 22.7
  Background counts = 44.2
  Rate = 0.01 +/- 0.001

[Sun Nov 27 22:42:58 2011] Off-axis axis estimate = 3.56'
[Mon Nov 28 06:30:03 2011] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 06:30:03 2011] Initial guess for spatial extent in simple fitting = 8.21"
[Mon Nov 28 06:30:03 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.877
[Mon Nov 28 06:30:03 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 8.21"
[Mon Nov 28 12:06:11 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Nov 28 12:06:11 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Nov 28 12:06:11 2011] Fit fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src3 appears to have run properly
[Mon Nov 28 12:06:12 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Nov 28 12:06:12 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Nov 28 12:06:12 2011] Fit fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Nov 28 17:19:32 2011] Spatial fit model total counts = 1315.920000, observed total counts = 1318.000000
[Mon Nov 28 17:19:32 2011] Offset between fit and detection position for source 2 = 1.144694 pixels
[Mon Nov 28 17:19:32 2011] 1271.117000 total counts/ 934.238000 bgd. counts: snr = 11.021613
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.144694 pixels
  Position = (306.7, 345.7) = 18 1 46.72 -23 16 1.2
  Extent = 16.4 (16.4-32.8)", rotation angle = 0
  Source counts = 336.9 +/- 35.7
  Background counts = 934.2
  Rate = 0.02 +/- 0.002
[Mon Nov 28 17:19:32 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:19:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:19:32 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 17:19:32 2011] Source does appear to be extended
[Mon Nov 28 17:19:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 17:19:32 2011] Source is confused with source 3
[Mon Nov 28 17:19:32 2011] Source is confused with source 22
[Tue Nov 29 01:54:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov 29 01:54:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov 29 01:54:51 2011] Initial guess for spatial extent in simple fitting = 16.42"
[Tue Nov 29 01:54:51 2011] source mask rpix=3.8, npix_max = 73, mask sum = 81, frac = 1.108
[Tue Nov 29 01:54:51 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 16.42"
[Tue Nov 29 06:27:50 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Nov 29 06:27:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src3.csv
[Tue Nov 29 06:27:50 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Nov 29 06:27:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src3.csv
[Tue Nov 29 06:27:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 06:27:51 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Nov 29 06:27:51 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Nov 29 06:27:51 2011] Fit fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Nov 29 10:56:41 2011] Warning, spatial fit 3 centroid is now closest to src. 4
[Tue Nov 29 10:56:41 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 10:56:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 10:56:41 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 10:56:41 2011] Source does appear to be extended
[Tue Nov 29 10:56:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 18:34:06 2011] XMMSAS src. selection expression = ellipse(26635.382000, 30030.237800, 985.242028, 985.242028, 0.000000, X, Y)
[Wed Nov 30 18:34:06 2011] Writing source region out to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src2_src.reg
[Wed Nov 30 18:34:06 2011] Extracting stamp from image fullrun_mos1_xmm0145970101_pi300-10000_cl_sm2.00.img.gz, (250, 289) - (363, 402)
[Wed Nov 30 18:34:06 2011] XMMSAS bgd. selection expression = annulus(26635.382000, 30030.237800, 1642.070047, 3284.140095, X, Y) && !ellipse(27008.157200, 28779.728600, 1222.688035, 1222.688035, 0.000000, X, Y) && !ellipse(26575.050000, 29797.460000, 2751.696079, 1667.744048, 333.082000, X, Y) && !ellipse(25938.600000, 26147.252000, 1250.848036, 1250.848036, 0.000000, X, Y) && !ellipse(27231.318000, 26858.741200, 1107.808032, 1107.808032, 0.000000, X, Y) && !ellipse(26155.155800, 28724.842400, 1224.112035, 1224.112035, 0.000000, X, Y) && !ellipse(26752.710400, 26062.010000, 1040.056030, 1040.056030, 0.000000, X, Y) && !ellipse(26212.593903, 26571.460938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29840.166000, 34536.936000, 1237.896036, 1237.896036, 0.000000, X, Y) && !ellipse(27110.275238, 27788.271484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28382.509521, 30853.964783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27332.998000, 30176.964000, 1375.848040, 1375.848040, 0.000000, X, Y) && !ellipse(28199.519400, 31748.321000, 1091.648031, 1091.648031, 0.000000, X, Y) && !ellipse(30195.290040, 34665.290800, 3236.784093, 1518.424044, 323.506000, X, Y) && !ellipse(25795.420000, 26225.472000, 1074.536031, 1074.536031, 0.000000, X, Y) && !ellipse(27815.930000, 30417.616000, 1396.600040, 1396.600040, 0.000000, X, Y) && !ellipse(29072.790000, 33659.728000, 2451.664071, 2451.664071, 0.000000, X, Y) && !ellipse(28612.090000, 31110.314000, 2790.928080, 2790.928080, 0.000000, X, Y) && !ellipse(30275.532000, 35049.514000, 1743.792050, 1743.792050, 0.000000, X, Y)
[Wed Nov 30 18:34:06 2011] Writing fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src2.gif
[Wed Nov 30 18:35:30 2011] Mean detx,y = (2592.71, -604.89) 
[Wed Nov 30 18:35:32 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 18:35:55 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 18:35:56 2011] Setting source spectrum file to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Nov 30 18:35:56 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Nov 30 22:34:52 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:52 2011] Error reading totcts from fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Nov 30 22:34:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:54 2011] Using photon index=1.80, rate=0.0156, arf fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src2.arf
[Wed Nov 30 22:34:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:54 2011] Updating source flux to 1.8e-13
[Wed Nov 30 22:35:00 2011] Flag c found in src. 2 procflags, skipping spectral fitting