[Sun Nov 27 22:42:56 2011] Detection parameters:
  Position = (354.4, 403.0) = 18 1 31.68 -23 11 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.5 +/- 12.1
  Background counts = 17.3
  Rate = 0.005 +/- 0.001

[Sun Nov 27 22:42:58 2011] Off-axis axis estimate = 8.60'
[Mon Nov 28 06:30:03 2011] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 06:30:03 2011] Initial guess for spatial extent in simple fitting = 10.73"
[Mon Nov 28 06:30:03 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.023
[Mon Nov 28 06:30:03 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 10.73"
[Mon Nov 28 12:06:11 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src21.ximg exists
[Mon Nov 28 12:06:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src21.csv
[Mon Nov 28 12:06:11 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Nov 28 12:06:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src21.csv
[Mon Nov 28 12:06:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 12:06:13 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Nov 28 12:06:13 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Nov 28 12:06:13 2011] Fit fullrun_mos1_xmm0145970101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Nov 28 17:19:32 2011] Warning, spatial fit 21 centroid is now closest to src. 9
[Mon Nov 28 17:19:32 2011] Spatial fit model total counts = 430.051000, observed total counts = 432.000000
[Mon Nov 28 17:19:32 2011] Offset between fit and detection position for source 10 = 0.968644 pixels
[Mon Nov 28 17:19:32 2011] Warning, changing simple spatial fit ID from 21 to 33
[Mon Nov 28 17:19:32 2011] 420.779000 total counts/ 283.712000 bgd. counts: snr = 8.137557
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.968644 pixels
  Position = (354.0, 403.9) = 18 1 31.81 -23 11 48.1
  Extent = 21.8 (21.7-43.6)", rotation angle = 0
  Source counts = 137.1 +/- 20.5
  Background counts = 283.7
  Rate = 0.006 +/- 0.001
[Mon Nov 28 17:19:32 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:19:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:19:32 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 17:19:32 2011] Source does appear to be extended
[Mon Nov 28 17:19:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 17:19:32 2011] Source is confused with source 15
[Tue Nov 29 01:54:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov 29 01:54:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov 29 01:54:51 2011] Initial guess for spatial extent in simple fitting = 21.79"
[Tue Nov 29 01:54:51 2011] source mask rpix=5.0, npix_max = 121, mask sum = 121, frac = 0.997
[Tue Nov 29 01:54:51 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 21.79"
[Tue Nov 29 06:27:50 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src18.ximg exists
[Tue Nov 29 06:27:50 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Nov 29 06:27:50 2011] Fit fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_src18 appears to have run properly
[Tue Nov 29 06:27:51 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Nov 29 06:27:51 2011] fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Nov 29 06:27:51 2011] Fit fullrun_mos1_xmm0145970101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Nov 29 10:56:41 2011] Warning, spatial fit 18 centroid is now closest to src. 5
[Tue Nov 29 10:56:41 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 10:56:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 10:56:41 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 10:56:41 2011] Source does appear to be extended
[Tue Nov 29 10:56:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 18:34:07 2011] XMMSAS src. selection expression = ellipse(30746.174000, 35091.258000, 1307.202038, 1307.202038, 0.000000, X, Y)
[Wed Nov 30 18:34:07 2011] Writing source region out to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src10_src.reg
[Wed Nov 30 18:34:07 2011] Extracting stamp from image fullrun_mos1_xmm0145970101_pi300-10000_cl_sm2.00.img.gz, (279, 329) - (429, 479)
[Wed Nov 30 18:34:07 2011] XMMSAS bgd. selection expression = annulus(30746.174000, 35091.258000, 2178.670063, 4357.340125, X, Y) && !ellipse(33973.340118, 33606.428345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26635.382000, 30030.237800, 1313.656038, 1313.656038, 0.000000, X, Y) && !ellipse(26575.050000, 29797.460000, 2751.696079, 1667.744048, 333.082000, X, Y) && !ellipse(29840.166000, 34536.936000, 1237.896036, 1237.896036, 0.000000, X, Y) && !ellipse(28382.509521, 30853.964783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27332.998000, 30176.964000, 1375.848040, 1375.848040, 0.000000, X, Y) && !ellipse(28199.519400, 31748.321000, 1091.648031, 1091.648031, 0.000000, X, Y) && !ellipse(30195.290040, 34665.290800, 3236.784093, 1518.424044, 323.506000, X, Y) && !ellipse(27815.930000, 30417.616000, 1396.600040, 1396.600040, 0.000000, X, Y) && !ellipse(29072.790000, 33659.728000, 2451.664071, 2451.664071, 0.000000, X, Y) && !ellipse(30741.019836, 34502.328156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31177.618164, 35249.971130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28612.090000, 31110.314000, 2790.928080, 2790.928080, 0.000000, X, Y) && !ellipse(30275.532000, 35049.514000, 1743.792050, 1743.792050, 0.000000, X, Y) && !ellipse(34380.320800, 30629.701800, 1134.656033, 1134.656033, 0.000000, X, Y)
[Wed Nov 30 18:34:07 2011] Writing fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src10.gif
[Wed Nov 30 18:55:52 2011] Mean detx,y = (7619.40, 3391.95) 
[Wed Nov 30 18:55:55 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 18:56:55 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 18:56:55 2011] Setting source spectrum file to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Nov 30 18:56:55 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Nov 30 22:34:53 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:53 2011] Error reading totcts from fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Nov 30 22:34:55 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:55 2011] Using photon index=1.80, rate=0.00636, arf fullrun_mos1_xmm0145970101_pi300-10000_pass1_cl_src10.arf
[Wed Nov 30 22:34:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:55 2011] Updating source flux to 9.4e-14
[Wed Nov 30 22:35:00 2011] Flag c found in src. 10 procflags, skipping spectral fitting