[Sun May 12 14:56:56 2013] Detection parameters:
  Position = (325.3, 429.9) = 18 10 17.42 -21 4 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 227.3 +/- 22.3
  Background counts = 86.4
  Rate = 0.007 +/- 0.0007

[Sun May 12 14:56:56 2013] Off-axis axis estimate = 9.73'
[Sun May 12 14:59:56 2013] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Sun May 12 14:59:56 2013] Initial guess for spatial extent in simple fitting = 11.29"
[Sun May 12 14:59:56 2013] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.913
[Sun May 12 14:59:56 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 11.29"
[Sun May 12 15:32:44 2013] fullrun_pn_xmm0145840201_pi300-10000_cl_pass0_src25.ximg exists
[Sun May 12 15:32:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145840201_pi300-10000_cl_pass0_src25.csv
[Sun May 12 15:32:44 2013] fullrun_pn_xmm0145840201_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun May 12 15:32:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145840201_pi300-10000_cl_pass0_src25.csv
[Sun May 12 15:32:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145840201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145840201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 15:32:44 2013] fullrun_pn_xmm0145840201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun May 12 15:32:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145840201_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun May 12 15:32:44 2013] fullrun_pn_xmm0145840201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun May 12 15:32:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145840201_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun May 12 15:32:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145840201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145840201_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 16:28:02 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 10.226529 pixels away
[Sun May 12 16:28:02 2013] Vigneting correction estimate = 1.000000
[Sun May 12 16:28:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 16:28:02 2013] Assessing source extent using major
[Sun May 12 16:28:02 2013] Source does appear to be extended
[Sun May 12 16:28:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 16:28:17 2013] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Sun May 12 16:28:17 2013] Initial guess for spatial extent in simple fitting = 11.29"
[Sun May 12 16:28:17 2013] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.913
[Sun May 12 16:28:17 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 11.29"
[Sun May 12 16:57:13 2013] fullrun_pn_xmm0145840201_pi300-10000_cl_pass1_src25.ximg exists
[Sun May 12 16:57:13 2013] fullrun_pn_xmm0145840201_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun May 12 16:57:13 2013] Fit fullrun_pn_xmm0145840201_pi300-10000_cl_pass1_src25 appears to have run properly
[Sun May 12 16:57:14 2013] fullrun_pn_xmm0145840201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun May 12 16:57:14 2013] fullrun_pn_xmm0145840201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun May 12 16:57:14 2013] Fit fullrun_pn_xmm0145840201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sun May 12 17:48:12 2013] Spatial fit model total counts = 520.309000, observed total counts = 445.000000
[Sun May 12 17:48:12 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 17:48:13 2013] Spatial fit model total counts = 521.893000, observed total counts = 498.000000
[Sun May 12 17:48:13 2013] Offset between fit and detection position for source 26 = 0.509221 pixels
[Sun May 12 17:48:13 2013] 521.925000 total counts/ 384.554000 bgd. counts: snr = 7.005133
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.509221 pixels
  Position = (324.8, 429.9) = 18 10 17.58 -21 4 38.6
  Extent = 8.6 (6.3-11.5)" x 5.1 (3.8-6.6)", rotation angle = 19 (352-38) degrees
  Source counts = 137.4 +/- 22.8
  Background counts = 384.6
  Rate = 0.007 +/- 0.001
[Sun May 12 17:48:13 2013] Vigneting correction estimate = 1.000000
[Sun May 12 17:48:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 17:48:13 2013] Assessing source extent using major axis lower bound
[Sun May 12 17:48:13 2013] Source does appear to be extended
[Sun May 12 17:48:13 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.95
[Sun May 12 17:48:28 2013] XMMSAS src. selection expression = ellipse(28206.408200, 37348.967600, 516.630015, 303.336609, 19.140170, X, Y)
[Sun May 12 17:48:28 2013] Writing source region out to fullrun_pn_xmm0145840201_pi300-10000_pass1_cl_src26_src.reg
[Sun May 12 17:48:28 2013] Extracting stamp from image fullrun_pn_xmm0145840201_pi300-10000_cl_sm2.00.img.gz, (295, 400) - (354, 460)
[Sun May 12 17:48:28 2013] XMMSAS bgd. selection expression = annulus(28206.408200, 37348.967600, 861.050025, 1722.100050, X, Y) && !ellipse(26774.044983, 36955.182281, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 17:48:28 2013] Writing fullrun_pn_xmm0145840201_pi300-10000_pass1_cl_src26.gif
[Sun May 12 18:06:21 2013] Mean detx,y = (-3088.36, 12945.74) 
[Sun May 12 18:06:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 18:06:39 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 18:06:40 2013] Setting source spectrum file to fullrun_pn_xmm0145840201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun May 12 18:06:40 2013] Setting bgd. spectrum file to fullrun_pn_xmm0145840201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun May 12 18:50:35 2013] Updating aperture counts using extracted products
[Sun May 12 18:50:35 2013] Total counts from fullrun_pn_xmm0145840201_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 231.00
[Sun May 12 18:50:35 2013] Total counts from fullrun_pn_xmm0145840201_pi300-10000_pass1_cl_src26_bgd.pi.gz = 834.00
[Sun May 12 18:50:35 2013] Got source and background scale factors 463932.000000, 4301397.000000
[Sun May 12 18:50:36 2013] User source parameters:
  Position = (324.8, 429.9) = 18 10 17.58 -21 4 38.6
  Extent = 8.6 (6.3-11.5)" x 5.1 (3.8-6.6)", rotation angle = 19 (352-38) degrees
  Source aperture counts = 141.0 +/- 16.2
  Background aperture counts = 90.0
  Rate = 0.007 +/- 0.0008

[Sun May 12 18:50:36 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 18:50:36 2013] Using photon index=1.80, rate=0.00658, arf fullrun_pn_xmm0145840201_pi300-10000_pass1_cl_src26.arf
[Sun May 12 18:50:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 18:50:36 2013] Updating source flux to 1e-13
[Sun May 12 18:50:48 2013] Flag p found in src. 26 procflags, skipping spectral fitting
[Sun May 12 18:50:50 2013] xmm0145840201/analysis//spectral/fullrun_pn_xmm0145840201_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete