[Thu Aug 30 07:01:34 2012] Detection parameters:
  Position = (310.0, 278.0) = 10 45 3.67 -59 41 4.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28015.9 +/- 201.2
  Background counts = 27.3
  Rate = 3 +/- 0.02

[Thu Aug 30 07:01:34 2012] Off-axis axis estimate = 1.70'
[Thu Aug 30 07:14:49 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 07:14:49 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Aug 30 07:14:49 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Thu Aug 30 07:14:49 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu Aug 30 07:52:40 2012] fullrun_mos1_xmm0145740401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 30 07:52:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145740401_pi300-10000_cl_pass0_src1.csv
[Thu Aug 30 07:52:40 2012] fullrun_mos1_xmm0145740401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 30 07:52:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145740401_pi300-10000_cl_pass0_src1.csv
[Thu Aug 30 07:52:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145740401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145740401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 07:52:40 2012] fullrun_mos1_xmm0145740401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 30 07:52:40 2012] fullrun_mos1_xmm0145740401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 30 07:52:40 2012] Fit fullrun_mos1_xmm0145740401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug 30 08:49:30 2012] Spatial fit model total counts = 30023.000000, observed total counts = 30067.000000
[Thu Aug 30 08:49:30 2012] Offset between fit and detection position for source 2 = 0.091917 pixels
[Thu Aug 30 08:49:30 2012] 30055.290000 total counts/ 7567.990000 bgd. counts: snr = 258.491960
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.091917 pixels
  Position = (310.1, 278.0) = 10 45 3.62 -59 41 4.2
  Extent = 8.2 (8.1-8.3)", rotation angle = 0
  Source counts = 22487.3 +/- 173.4
  Background counts = 7568.0
  Rate = 3 +/- 0.02
[Thu Aug 30 08:49:30 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 08:49:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 08:49:30 2012] Assessing source extent using major axis lower bound
[Thu Aug 30 08:49:30 2012] Source does appear to be extended
[Thu Aug 30 08:49:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 08:54:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 30 08:54:31 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Thu Aug 30 08:54:31 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.701
[Thu Aug 30 08:54:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.22"
[Thu Aug 30 09:17:33 2012] fullrun_mos1_xmm0145740401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug 30 09:17:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145740401_pi300-10000_cl_pass1_src1.csv
[Thu Aug 30 09:17:33 2012] fullrun_mos1_xmm0145740401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug 30 09:17:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145740401_pi300-10000_cl_pass1_src1.csv
[Thu Aug 30 09:17:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145740401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145740401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 09:17:33 2012] fullrun_mos1_xmm0145740401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug 30 09:17:33 2012] fullrun_mos1_xmm0145740401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug 30 09:17:33 2012] Fit fullrun_mos1_xmm0145740401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug 30 10:00:43 2012] Spatial fit model total counts = 30015.700000, observed total counts = 30067.000000
[Thu Aug 30 10:00:43 2012] Offset between fit and detection position for source 2 = 0.000473 pixels
[Thu Aug 30 10:00:43 2012] 30047.620000 total counts/ 7559.620000 bgd. counts: snr = 258.643072
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000473 pixels
  Position = (310.1, 278.0) = 10 45 3.62 -59 41 4.2
  Extent = 8.2 (8.1-8.3)", rotation angle = 0
  Source counts = 22488.0 +/- 173.3
  Background counts = 7559.6
  Rate = 3 +/- 0.02
[Thu Aug 30 10:00:43 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 10:00:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 10:00:43 2012] Assessing source extent using major axis lower bound
[Thu Aug 30 10:00:43 2012] Source does appear to be extended
[Thu Aug 30 10:00:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 10:00:43 2012] Source is confused with source 6
[Thu Aug 30 10:06:06 2012] Counts = 22488.000000, rescaling region sizes by 3.000000
[Thu Aug 30 10:06:06 2012] XMMSAS src. selection expression = ellipse(26930.106780, 24135.528200, 1479.889843, 1479.889843, 0.000000, X, Y)
[Thu Aug 30 10:06:06 2012] Writing source region out to fullrun_mos1_xmm0145740401_pi300-10000_pass1_cl_src2_src.reg
[Thu Aug 30 10:06:06 2012] Extracting stamp from image fullrun_mos1_xmm0145740401_pi300-10000_cl_sm2.00.img.gz, (225, 193) - (395, 363)
[Thu Aug 30 10:06:06 2012] XMMSAS bgd. selection expression = annulus(26930.106780, 24135.528200, 7399.449213, 14798.898426, X, Y) && !ellipse(34969.812439, 21545.481186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29734.291400, 32741.267000, 564.060816, 564.060816, 0.000000, X, Y) && !ellipse(36965.462000, 34283.050000, 1133.584033, 404.240812, 83.712000, X, Y) && !ellipse(31436.445100, 20307.637200, 350.686410, 350.686410, 0.000000, X, Y) && !ellipse(26845.116000, 24809.644000, 1091.712031, 1091.712031, 0.000000, X, Y) && !ellipse(26206.719500, 18064.747400, 332.180010, 332.180010, 0.000000, X, Y) && !ellipse(33831.055800, 21048.657200, 327.108009, 327.108009, 0.000000, X, Y) && !ellipse(25708.707340, 20600.584200, 251.126407, 251.126407, 0.000000, X, Y) && !ellipse(35294.310600, 31912.614800, 799.308823, 799.308823, 0.000000, X, Y) && !ellipse(28918.171440, 25105.629800, 512.133930, 512.133930, 0.000000, X, Y) && !ellipse(28116.018921, 23567.359009, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25552.977800, 19534.725200, 646.158419, 646.158419, 0.000000, X, Y) && !ellipse(17058.814880, 21474.208252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37316.789307, 33298.314850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37874.799469, 34241.437012, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 30 10:06:06 2012] Writing fullrun_mos1_xmm0145740401_pi300-10000_pass1_cl_src2.gif
[Thu Aug 30 10:06:10 2012] Mean detx,y = (326.28, -286.53) 
[Thu Aug 30 10:06:11 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 10:09:05 2012] grppha failed
[Thu Aug 30 10:09:05 2012] Setting source spectrum file to fullrun_mos1_xmm0145740401_pi300-10000_pass1_cl_src2_src.pi.gz
[Thu Aug 30 10:09:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0145740401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Aug 30 10:18:34 2012] Updating aperture counts using extracted products
[Thu Aug 30 10:18:34 2012] Error reading totcts from fullrun_mos1_xmm0145740401_pi300-10000_pass1_cl_src2_src.pi.gz
[Thu Aug 30 10:18:34 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 10:18:35 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Thu Aug 30 10:18:35 2012] Source 2 has no response, skipping
[Thu Aug 30 10:18:36 2012] xmm0145740401/analysis//spectral/fullrun_mos1_xmm0145740401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete