[Tue Sep  4 10:31:33 2012] Detection parameters:
  Position = (301.3, 207.4) = 10 45 8.28 -59 46 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.9 +/- 16.5
  Background counts = 21.2
  Rate = 0.03 +/- 0.003

[Tue Sep  4 10:31:33 2012] Off-axis axis estimate = 6.61'
[Tue Sep  4 11:22:46 2012] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 11:22:46 2012] Initial guess for spatial extent in simple fitting = 9.73"
[Tue Sep  4 11:22:46 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.834
[Tue Sep  4 11:22:46 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 9.73"
[Tue Sep  4 12:50:20 2012] fullrun_mos2_xmm0145740201_pi300-10000_cl_pass0_src8.ximg exists
[Tue Sep  4 12:50:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0145740201_pi300-10000_cl_pass0_src8.csv
[Tue Sep  4 12:50:20 2012] fullrun_mos2_xmm0145740201_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Sep  4 12:50:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0145740201_pi300-10000_cl_pass0_src8.csv
[Tue Sep  4 12:50:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0145740201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0145740201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 12:50:21 2012] fullrun_mos2_xmm0145740201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Sep  4 12:50:21 2012] fullrun_mos2_xmm0145740201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Sep  4 12:50:21 2012] Fit fullrun_mos2_xmm0145740201_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Tue Sep  4 12:50:34 2012] Spatial fit model total counts = 339.406000, observed total counts = 338.000000
[Tue Sep  4 12:50:34 2012] Offset between fit and detection position for source 8 = 0.137177 pixels
[Tue Sep  4 12:50:34 2012] 340.242000 total counts/ 235.375000 bgd. counts: snr = 6.835317
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.137177 pixels
  Position = (301.3, 207.5) = 10 45 8.25 -59 46 5.7
  Extent = 4.5 (3.8-5.4)", rotation angle = 0
  Source counts = 104.9 +/- 18.4
  Background counts = 235.4
  Rate = 0.02 +/- 0.003
[Tue Sep  4 12:50:34 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 12:50:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 12:50:34 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 12:50:34 2012] Source does appear to be extended
[Tue Sep  4 12:50:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 13:24:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep  4 13:24:02 2012] Initial guess for spatial extent in simple fitting = 4.53"
[Tue Sep  4 13:24:02 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.947
[Tue Sep  4 13:24:02 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 4.53"
[Tue Sep  4 14:42:07 2012] fullrun_mos2_xmm0145740201_pi300-10000_cl_pass1_src8.ximg exists
[Tue Sep  4 14:42:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145740201_pi300-10000_cl_pass1_src8.csv
[Tue Sep  4 14:42:07 2012] fullrun_mos2_xmm0145740201_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Sep  4 14:42:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145740201_pi300-10000_cl_pass1_src8.csv
[Tue Sep  4 14:42:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0145740201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0145740201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 14:42:07 2012] fullrun_mos2_xmm0145740201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Sep  4 14:42:07 2012] fullrun_mos2_xmm0145740201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Sep  4 14:42:07 2012] Fit fullrun_mos2_xmm0145740201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Sep  4 14:42:16 2012] Spatial fit model total counts = 336.471000, observed total counts = 338.000000
[Tue Sep  4 14:42:16 2012] Offset between fit and detection position for source 8 = 0.024170 pixels
[Tue Sep  4 14:42:16 2012] 337.252000 total counts/ 233.840000 bgd. counts: snr = 6.762566
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.024170 pixels
  Position = (301.3, 207.5) = 10 45 8.24 -59 46 5.7
  Extent = 4.6 (3.8-5.4)", rotation angle = 0
  Source counts = 103.4 +/- 18.4
  Background counts = 233.8
  Rate = 0.01 +/- 0.003
[Tue Sep  4 14:42:16 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 14:42:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 14:42:16 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 14:42:16 2012] Source does appear to be extended
[Tue Sep  4 14:42:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 14:57:01 2012] XMMSAS src. selection expression = ellipse(26166.062200, 18004.367400, 276.153780, 276.153780, 0.000000, X, Y)
[Tue Sep  4 14:57:01 2012] Writing source region out to fullrun_mos2_xmm0145740201_pi300-10000_pass1_cl_src8_src.reg
[Tue Sep  4 14:57:01 2012] Extracting stamp from image fullrun_mos2_xmm0145740201_pi300-10000_cl_sm2.00.img.gz, (285, 192) - (317, 223)
[Tue Sep  4 14:57:01 2012] XMMSAS bgd. selection expression = annulus(26166.062200, 18004.367400, 460.256299, 920.512599, X, Y) && !ellipse(25541.619680, 19437.450960, 604.855217, 604.855217, 0.000000, X, Y)
[Tue Sep  4 14:57:01 2012] Writing fullrun_mos2_xmm0145740201_pi300-10000_pass1_cl_src8.gif
[Tue Sep  4 15:05:56 2012] Mean detx,y = (-5500.29, 2597.67) 
[Tue Sep  4 15:05:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 15:06:04 2012] grppha failed
[Tue Sep  4 15:06:04 2012] Setting source spectrum file to fullrun_mos2_xmm0145740201_pi300-10000_pass1_cl_src8_src.pi.gz
[Tue Sep  4 15:06:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0145740201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Sep  4 15:10:49 2012] Updating aperture counts using extracted products
[Tue Sep  4 15:10:49 2012] Error reading totcts from fullrun_mos2_xmm0145740201_pi300-10000_pass1_cl_src8_src.pi.gz
[Tue Sep  4 15:10:50 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 15:10:51 2012] Source 8 has no response, skipping
[Tue Sep  4 15:10:52 2012] xmm0145740201/analysis//spectral/fullrun_mos2_xmm0145740201_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete