[Mon May 28 06:39:39 2012] Detection parameters:
  Position = (248.7, 208.3) = 14 15 0.42 -0 28 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.4 +/- 15.1
  Background counts = 56.8
  Rate = 0.005 +/- 0.001

[Mon May 28 06:39:39 2012] Off-axis axis estimate = 7.46'
[Mon May 28 06:41:15 2012] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Mon May 28 06:41:15 2012] Initial guess for spatial extent in simple fitting = 10.16"
[Mon May 28 06:41:15 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.933
[Mon May 28 06:41:15 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 10.16"
[Mon May 28 07:38:04 2012] fullrun_pn_xmm0145480101_pi300-10000_cl_pass0_src33.ximg exists
[Mon May 28 07:38:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145480101_pi300-10000_cl_pass0_src33.csv
[Mon May 28 07:38:04 2012] fullrun_pn_xmm0145480101_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon May 28 07:38:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145480101_pi300-10000_cl_pass0_src33.csv
[Mon May 28 07:38:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145480101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145480101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 07:38:04 2012] fullrun_pn_xmm0145480101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon May 28 07:38:04 2012] fullrun_pn_xmm0145480101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon May 28 07:38:04 2012] Fit fullrun_pn_xmm0145480101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Mon May 28 08:14:34 2012] Source 34 is offset by 3.902789 and -3.450528 pixels which is larger than
2 X fitted extent = 1.223485 x 1.223485, not incorporating fit results
[Mon May 28 08:14:34 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 14.481942 pixels away
[Mon May 28 08:14:34 2012] Spatial fit model total counts = 612.379000, observed total counts = 613.000000
[Mon May 28 08:14:34 2012] Offset between fit and detection position for source 34 = 1.766327 pixels
[Mon May 28 08:14:34 2012] 602.888300 total counts/ 557.260000 bgd. counts: snr = 1.932882
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 1.766327 pixels
  Position = (246.9, 208.4) = 14 15 0.93 -0 28 52.4
  Extent = 7.1 (4.7-11.4)", rotation angle = 0
  Source counts = 45.6 +/- 24.6
  Background counts = 557.3
  Rate = 0.002 +/- 0.001
[Mon May 28 08:14:34 2012] Vigneting correction estimate = 1.000000
[Mon May 28 08:14:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 08:14:34 2012] Assessing source extent using major axis lower bound
[Mon May 28 08:14:34 2012] Source does appear to be extended
[Mon May 28 08:14:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 08:14:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 08:14:48 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Mon May 28 08:14:48 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.097
[Mon May 28 08:14:48 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 7.11"
[Mon May 28 09:01:54 2012] fullrun_pn_xmm0145480101_pi300-10000_cl_pass1_src31.ximg exists
[Mon May 28 09:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145480101_pi300-10000_cl_pass1_src31.csv
[Mon May 28 09:01:54 2012] fullrun_pn_xmm0145480101_pi300-10000_cl_pass1_src31_1.ximg exists
[Mon May 28 09:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145480101_pi300-10000_cl_pass1_src31.csv
[Mon May 28 09:01:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145480101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145480101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 09:01:55 2012] fullrun_pn_xmm0145480101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Mon May 28 09:01:55 2012] fullrun_pn_xmm0145480101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Mon May 28 09:01:55 2012] Fit fullrun_pn_xmm0145480101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Mon May 28 09:36:34 2012] Spatial fit model total counts = 628.547000, observed total counts = 626.000000
[Mon May 28 09:36:34 2012] Offset between fit and detection position for source 34 = 0.014093 pixels
[Mon May 28 09:36:34 2012] 618.177700 total counts/ 571.932000 bgd. counts: snr = 1.933745
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.014093 pixels
  Position = (246.9, 208.4) = 14 15 0.93 -0 28 52.4
  Extent = 7.2 (4.8-11.5)", rotation angle = 0
  Source counts = 46.2 +/- 24.9
  Background counts = 571.9
  Rate = 0.003 +/- 0.001
[Mon May 28 09:36:34 2012] Vigneting correction estimate = 1.000000
[Mon May 28 09:36:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 09:36:34 2012] Assessing source extent using major axis lower bound
[Mon May 28 09:36:34 2012] Source does appear to be extended
[Mon May 28 09:36:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 09:36:45 2012] XMMSAS src. selection expression = ellipse(21432.959640, 18085.839600, 431.854812, 431.854812, 0.000000, X, Y)
[Mon May 28 09:36:45 2012] Writing source region out to fullrun_pn_xmm0145480101_pi300-10000_pass1_cl_src34_src.reg
[Mon May 28 09:36:45 2012] Extracting stamp from image fullrun_pn_xmm0145480101_pi300-10000_cl_sm2.00.img.gz, (222, 184) - (272, 233)
[Mon May 28 09:36:45 2012] XMMSAS bgd. selection expression = annulus(21432.959640, 18085.839600, 719.758021, 1439.516041, X, Y) && !ellipse(19396.045600, 17446.992000, 1526.880044, 1526.880044, 0.000000, X, Y) && !ellipse(20377.346619, 17447.945267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20075.698000, 18122.000000, 1711.512049, 1711.512049, 0.000000, X, Y) && !ellipse(19420.338654, 16748.441956, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 09:36:45 2012] Writing fullrun_pn_xmm0145480101_pi300-10000_pass1_cl_src34.gif
[Mon May 28 09:50:41 2012] Mean detx,y = (5431.15, -4808.38) 
[Mon May 28 09:50:43 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 09:50:51 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 09:50:51 2012] Setting source spectrum file to fullrun_pn_xmm0145480101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon May 28 09:50:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0145480101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Mon May 28 10:09:45 2012] Not generating rmf since there are only 46 counts
[Mon May 28 10:09:45 2012] rmf not generated due to insufficient counts
[Mon May 28 10:49:12 2012] Updating aperture counts using extracted products
[Mon May 28 10:49:12 2012] Error reading totcts from fullrun_pn_xmm0145480101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon May 28 10:49:13 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 10:49:13 2012] Using photon index=1.80, rate=0.00251, arf fullrun_pn_xmm0145480101_pi300-10000_pass1_cl_src34.arf
[Mon May 28 10:49:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 10:49:13 2012] Updating source flux to 9.6e-15
[Mon May 28 10:50:06 2012] Flag b found in src. 34 procflags, skipping spectral fitting
[Mon May 28 10:50:06 2012] Source 34 has fewer than 100.000000 counts, skipping spectral fitting