[Mon Jun  3 03:16:52 2013] Detection parameters:
  Position = (284.3, 273.6) = 16 57 54.20 35 20 48.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.8 +/- 13.6
  Background counts = 29.6
  Rate = 0.008 +/- 0.002

[Mon Jun  3 03:16:53 2013] Off-axis axis estimate = 2.07'
[Mon Jun  3 03:57:03 2013] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 03:57:03 2013] Initial guess for spatial extent in simple fitting = 7.47"
[Mon Jun  3 03:57:03 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.018
[Mon Jun  3 03:57:03 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.47"
[Mon Jun  3 04:20:25 2013] fullrun_mos2_xmm0145430401_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun  3 04:20:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145430401_pi300-10000_cl_pass0_src3.csv
[Mon Jun  3 04:20:25 2013] fullrun_mos2_xmm0145430401_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun  3 04:20:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145430401_pi300-10000_cl_pass0_src3.csv
[Mon Jun  3 04:20:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0145430401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0145430401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 04:20:25 2013] fullrun_mos2_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun  3 04:20:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun  3 04:20:25 2013] fullrun_mos2_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun  3 04:20:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun  3 04:20:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 04:20:34 2013] Spatial fit model total counts = 54.531000, observed total counts = 639.000000
[Mon Jun  3 04:20:34 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 04:20:34 2013] Source 3 is offset by -7.703485 and -2.466547 pixels which is larger than
2 X fitted extent = 0.877241 x 0.877241, not incorporating fit results
[Mon Jun  3 04:20:34 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 04:20:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 04:20:34 2013] Assessing source extent using major
[Mon Jun  3 04:20:34 2013] Source does appear to be extended
[Mon Jun  3 04:20:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 04:20:34 2013] Deleting source due to low Poisson probability 0.9