[Mon Jun  3 03:16:19 2013] Detection parameters:
  Position = (300.2, 258.6) = 16 57 48.57 35 19 38.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.5 +/- 14.0
  Background counts = 32.2
  Rate = 0.007 +/- 0.002

[Mon Jun  3 03:16:19 2013] Off-axis axis estimate = 2.89'
[Mon Jun  3 03:45:51 2013] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 03:45:51 2013] Initial guess for spatial extent in simple fitting = 7.88"
[Mon Jun  3 03:45:51 2013] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.562
[Mon Jun  3 03:45:51 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.88"
[Mon Jun  3 03:57:03 2013] fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun  3 03:57:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_src3.csv
[Mon Jun  3 03:57:03 2013] fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun  3 03:57:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_src3.csv
[Mon Jun  3 03:57:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 03:57:03 2013] fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun  3 03:57:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun  3 03:57:03 2013] fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun  3 03:57:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun  3 03:57:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 04:20:31 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.453450 pixels away
[Mon Jun  3 04:20:31 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 04:20:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 04:20:31 2013] Assessing source extent using major
[Mon Jun  3 04:20:31 2013] Source does appear to be extended
[Mon Jun  3 04:20:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 04:20:31 2013] Deleting source due to low Poisson probability 0.9