[Mon Jun  3 03:16:19 2013] Detection parameters:
  Position = (319.7, 298.6) = 16 57 41.61 35 22 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.0 +/- 14.1
  Background counts = 32.8
  Rate = 0.01 +/- 0.002

[Mon Jun  3 03:16:19 2013] Off-axis axis estimate = 1.54'
[Mon Jun  3 03:45:51 2013] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 03:45:51 2013] Initial guess for spatial extent in simple fitting = 7.20"
[Mon Jun  3 03:45:51 2013] source mask rpix=1.7, npix_max = 18, mask sum = 19, frac = 1.023
[Mon Jun  3 03:45:51 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.20"
[Mon Jun  3 03:57:03 2013] fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jun  3 03:57:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_src2.csv
[Mon Jun  3 03:57:03 2013] fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jun  3 03:57:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_src2.csv
[Mon Jun  3 03:57:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 03:57:03 2013] fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jun  3 03:57:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Jun  3 03:57:03 2013] fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jun  3 03:57:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Jun  3 03:57:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145430401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 04:20:31 2013] Spatial fit model total counts = -75.893200, observed total counts = 151.000000
[Mon Jun  3 04:20:31 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 04:20:31 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 04:20:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 04:20:31 2013] Assessing source extent using major
[Mon Jun  3 04:20:31 2013] Source does appear to be extended
[Mon Jun  3 04:20:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 04:38:37 2013] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 04:38:37 2013] Initial guess for spatial extent in simple fitting = 7.20"
[Mon Jun  3 04:38:37 2013] source mask rpix=1.7, npix_max = 18, mask sum = 19, frac = 1.023
[Mon Jun  3 04:38:37 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.20"
[Mon Jun  3 04:43:39 2013] fullrun_mos1_xmm0145430401_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jun  3 04:43:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145430401_pi300-10000_cl_pass1_src2.csv
[Mon Jun  3 04:43:39 2013] fullrun_mos1_xmm0145430401_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jun  3 04:43:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145430401_pi300-10000_cl_pass1_src2.csv
[Mon Jun  3 04:43:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145430401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145430401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 04:43:39 2013] fullrun_mos1_xmm0145430401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jun  3 04:43:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145430401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jun  3 04:43:39 2013] fullrun_mos1_xmm0145430401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jun  3 04:43:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145430401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jun  3 04:43:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145430401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145430401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 04:48:55 2013] Spatial fit model total counts = 47.919100, observed total counts = 151.000000
[Mon Jun  3 04:48:55 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 04:48:55 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 04:48:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 04:48:55 2013] Assessing source extent using major
[Mon Jun  3 04:48:55 2013] Source does appear to be extended
[Mon Jun  3 04:48:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 05:00:52 2013] XMMSAS src. selection expression = ellipse(27767.373749, 25931.938721, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun  3 05:00:52 2013] Writing source region out to fullrun_mos1_xmm0145430401_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun  3 05:00:52 2013] Extracting stamp from image fullrun_mos1_xmm0145430401_pi300-10000_cl_sm2.00.img.gz, (282, 261) - (357, 336)
[Mon Jun  3 05:00:52 2013] XMMSAS bgd. selection expression = annulus(27767.373749, 25931.938721, 1087.500000, 2175.000000, X, Y) && !ellipse(25771.864240, 23511.467600, 472.705614, 449.153613, 310.024065, X, Y)
[Mon Jun  3 05:00:52 2013] Writing fullrun_mos1_xmm0145430401_pi300-10000_pass1_cl_src3.gif
[Mon Jun  3 05:02:46 2013] Mean detx,y = (-687.68, -2952.77) 
[Mon Jun  3 05:02:48 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 05:03:17 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 05:03:17 2013] Setting source spectrum file to fullrun_mos1_xmm0145430401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun  3 05:03:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0145430401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun  3 05:07:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun  3 05:07:45 2013] rmf not generated due to insufficient counts
[Mon Jun  3 05:23:17 2013] Updating aperture counts using extracted products
[Mon Jun  3 05:23:18 2013] Total counts from fullrun_mos1_xmm0145430401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 114.00
[Mon Jun  3 05:23:18 2013] Total counts from fullrun_mos1_xmm0145430401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 554.00
[Mon Jun  3 05:23:18 2013] Got source and background scale factors 989966.000000, 6118130.000000
[Mon Jun  3 05:23:18 2013] User source parameters:
  Position = (319.7, 298.6) = 16 57 41.61 35 22 33.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 24.4 +/- 11.7
  Background aperture counts = 89.6
  Rate = 0.003 +/- 0.001

[Mon Jun  3 05:23:18 2013] Updating counts from extracted products
[Mon Jun  3 05:23:18 2013] Set source signif. to 24.36/9.47 = 2.57
[Mon Jun  3 05:23:18 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 05:23:18 2013] Using photon index=1.80, rate=0.00273, arf fullrun_mos1_xmm0145430401_pi300-10000_pass1_cl_src3.arf
[Mon Jun  3 05:23:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 05:23:18 2013] Updating source flux to 3.2e-14
[Mon Jun  3 05:23:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun  3 05:23:22 2013] xmm0145430401/analysis//spectral/fullrun_mos1_xmm0145430401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete