[Mon Jun 18 22:57:09 2012] Detection parameters:
  Position = (408.0, 269.0) = 16 57 10.34 35 20 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.3 +/- 16.5
  Background counts = 26.1
  Rate = 0.02 +/- 0.003

[Mon Jun 18 22:57:09 2012] Off-axis axis estimate = 8.22'
[Tue Jun 19 00:04:33 2012] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 00:04:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 00:04:33 2012] Initial guess for spatial extent in simple fitting = 10.54"
[Tue Jun 19 00:04:33 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.053
[Tue Jun 19 00:04:33 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.54"
[Tue Jun 19 00:15:06 2012] fullrun_mos1_xmm0145430301_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun 19 00:15:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145430301_pi300-10000_cl_pass0_src2.csv
[Tue Jun 19 00:15:06 2012] fullrun_mos1_xmm0145430301_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun 19 00:15:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145430301_pi300-10000_cl_pass0_src2.csv
[Tue Jun 19 00:15:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145430301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145430301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 00:15:06 2012] fullrun_mos1_xmm0145430301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 19 00:15:06 2012] fullrun_mos1_xmm0145430301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 19 00:15:06 2012] Fit fullrun_mos1_xmm0145430301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jun 19 00:39:26 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.420460 pixels away
[Tue Jun 19 00:39:26 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 00:39:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 00:39:26 2012] Assessing source extent using major
[Tue Jun 19 00:39:26 2012] Source does appear to be extended
[Tue Jun 19 00:39:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 02:10:16 2012] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 02:10:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 02:10:16 2012] Initial guess for spatial extent in simple fitting = 10.54"
[Tue Jun 19 02:10:16 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.053
[Tue Jun 19 02:10:16 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.54"
[Tue Jun 19 02:17:02 2012] fullrun_mos1_xmm0145430301_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jun 19 02:17:02 2012] fullrun_mos1_xmm0145430301_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jun 19 02:17:02 2012] Fit fullrun_mos1_xmm0145430301_pi300-10000_cl_pass1_src2 appears to have run properly
[Tue Jun 19 02:17:02 2012] fullrun_mos1_xmm0145430301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jun 19 02:17:02 2012] fullrun_mos1_xmm0145430301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jun 19 02:17:02 2012] Fit fullrun_mos1_xmm0145430301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jun 19 02:20:14 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.016760 pixels away
[Tue Jun 19 02:20:14 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 02:20:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 02:20:14 2012] Assessing source extent using major
[Tue Jun 19 02:20:14 2012] Source does appear to be extended
[Tue Jun 19 02:20:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 03:22:22 2012] XMMSAS src. selection expression = ellipse(35446.661011, 23355.076141, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 19 03:22:22 2012] Writing source region out to fullrun_mos1_xmm0145430301_pi300-10000_pass1_cl_src2_src.reg
[Tue Jun 19 03:22:22 2012] Extracting stamp from image fullrun_mos1_xmm0145430301_pi300-10000_cl_sm2.00.img.gz, (370, 232) - (445, 307)
[Tue Jun 19 03:22:22 2012] XMMSAS bgd. selection expression = annulus(35446.661011, 23355.076141, 1087.500000, 2175.000000, X, Y)
[Tue Jun 19 03:22:22 2012] Writing fullrun_mos1_xmm0145430301_pi300-10000_pass1_cl_src2.gif
[Tue Jun 19 03:25:11 2012] Mean detx,y = (5029.16, -8784.08) 
[Tue Jun 19 03:25:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 03:25:26 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 03:25:26 2012] Setting source spectrum file to fullrun_mos1_xmm0145430301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 19 03:25:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0145430301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jun 19 03:34:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 19 03:34:26 2012] rmf not generated due to insufficient counts
[Tue Jun 19 03:42:40 2012] Updating aperture counts using extracted products
[Tue Jun 19 03:42:40 2012] Error reading totcts from fullrun_mos1_xmm0145430301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 19 03:42:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 03:42:40 2012] Using photon index=1.80, rate=0.0227, arf fullrun_mos1_xmm0145430301_pi300-10000_pass1_cl_src2.arf
[Tue Jun 19 03:42:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 03:42:40 2012] Updating source flux to 4.3e-13
[Tue Jun 19 03:42:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting