[Thu Dec  1 10:06:48 2011] Detection parameters:
  Position = (456.4, 307.2) = 14 40 11.93 77 6 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.7 +/- 14.5
  Background counts = 29.6
  Rate = 0.005 +/- 0.0007

[Thu Dec  1 10:06:48 2011] Off-axis axis estimate = 11.47'
[Thu Dec  1 10:50:44 2011] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 10:50:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec  1 10:50:44 2011] Initial guess for spatial extent in simple fitting = 12.16"
[Thu Dec  1 10:50:44 2011] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.128
[Thu Dec  1 10:50:44 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 12.16"
[Thu Dec  1 11:19:26 2011] fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Dec  1 11:19:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_src5.csv
[Thu Dec  1 11:19:26 2011] fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Dec  1 11:19:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_src5.csv
[Thu Dec  1 11:19:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 11:19:26 2011] fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Dec  1 11:19:26 2011] fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Dec  1 11:19:26 2011] Fit fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Dec  1 11:46:58 2011] Warning, spatial fit 5 centroid is now closest to src. 12
[Thu Dec  1 11:46:58 2011] Spatial fit model total counts = 154.671000, observed total counts = 155.000000
[Thu Dec  1 11:46:58 2011] Offset between fit and detection position for source 9 = 1.398208 pixels
[Thu Dec  1 11:46:58 2011] Warning, changing simple spatial fit ID from 5 to 9
[Thu Dec  1 11:46:58 2011] 155.123430 total counts/ 152.323000 bgd. counts: snr = 0.226904
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.398208 pixels
  Position = (455.0, 307.1) = 14 40 13.76 77 6 48.9
  Extent = 3.1 (3.1-3.4)", rotation angle = 0
  Source counts = 2.8 +/- 12.5
  Background counts = 152.3
  Rate = 8e-05 +/- 0.0004
  Deleting source due to low Poisson probability