[Thu Dec  1 10:06:48 2011] Detection parameters:
  Position = (282.1, 264.2) = 14 43 58.53 77 3 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 388.7 +/- 25.5
  Background counts = 34.1
  Rate = 0.01 +/- 0.0008

[Thu Dec  1 10:06:48 2011] Off-axis axis estimate = 2.75'
[Thu Dec  1 10:50:44 2011] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 10:50:44 2011] Initial guess for spatial extent in simple fitting = 7.80"
[Thu Dec  1 10:50:44 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.760
[Thu Dec  1 10:50:44 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.80"
[Thu Dec  1 11:19:26 2011] fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Dec  1 11:19:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_src2.csv
[Thu Dec  1 11:19:26 2011] fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Dec  1 11:19:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_src2.csv
[Thu Dec  1 11:19:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 11:19:26 2011] fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Dec  1 11:19:26 2011] fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Dec  1 11:19:26 2011] Fit fullrun_mos1_xmm0145240101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Dec  1 11:46:58 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.702705 pixels away
[Thu Dec  1 11:46:58 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 11:46:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 11:46:58 2011] Assessing source extent using major
[Thu Dec  1 11:46:58 2011] Source does appear to be extended
[Thu Dec  1 11:46:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 12:30:39 2011] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 12:30:39 2011] Initial guess for spatial extent in simple fitting = 7.80"
[Thu Dec  1 12:30:39 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.760
[Thu Dec  1 12:30:39 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 7.80"
[Thu Dec  1 12:52:39 2011] fullrun_mos1_xmm0145240101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Dec  1 12:52:39 2011] fullrun_mos1_xmm0145240101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Dec  1 12:52:39 2011] Fit fullrun_mos1_xmm0145240101_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu Dec  1 12:52:40 2011] fullrun_mos1_xmm0145240101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Dec  1 12:52:40 2011] fullrun_mos1_xmm0145240101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Dec  1 12:52:40 2011] Fit fullrun_mos1_xmm0145240101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Dec  1 13:22:03 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.702705 pixels away
[Thu Dec  1 13:22:03 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 13:22:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 13:22:03 2011] Assessing source extent using major
[Thu Dec  1 13:22:03 2011] Source does appear to be extended
[Thu Dec  1 13:22:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 14:22:06 2011] XMMSAS src. selection expression = ellipse(24490.456940, 22935.677094, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec  1 14:22:06 2011] Writing source region out to fullrun_mos1_xmm0145240101_pi300-10000_pass1_cl_src2_src.reg
[Thu Dec  1 14:22:06 2011] Extracting stamp from image fullrun_mos1_xmm0145240101_pi300-10000_cl_sm2.00.img.gz, (245, 227) - (320, 302)
[Thu Dec  1 14:22:06 2011] XMMSAS bgd. selection expression = annulus(24490.456940, 22935.677094, 1087.500000, 2175.000000, X, Y)
[Thu Dec  1 14:22:06 2011] Writing fullrun_mos1_xmm0145240101_pi300-10000_pass1_cl_src2.gif
[Thu Dec  1 14:22:23 2011] Mean detx,y = (-4610.51, -2027.31) 
[Thu Dec  1 14:22:26 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 14:22:44 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 14:22:44 2011] Setting source spectrum file to fullrun_mos1_xmm0145240101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec  1 14:22:44 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0145240101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Dec  1 14:29:55 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Dec  1 14:29:55 2011] rmf not generated due to insufficient counts
[Thu Dec  1 14:59:04 2011] Updating aperture counts using extracted products
[Thu Dec  1 14:59:04 2011] Error reading totcts from fullrun_mos1_xmm0145240101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec  1 14:59:04 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 14:59:04 2011] Using photon index=1.80, rate=0.0127, arf fullrun_mos1_xmm0145240101_pi300-10000_pass1_cl_src2.arf
[Thu Dec  1 14:59:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 14:59:04 2011] Updating source flux to 1.5e-13
[Thu Dec  1 14:59:06 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting