[Sun May 19 06:16:46 2013] Detection parameters:
  Position = (276.9, 308.8) = 0 3 27.41 -35 56 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.6 +/- 21.9
  Background counts = 173.8
  Rate = 0.003 +/- 0.0005

[Sun May 19 06:16:47 2013] Off-axis axis estimate = 1.73'
[Sun May 19 06:17:35 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun May 19 06:17:35 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Sun May 19 06:17:35 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Sun May 19 06:17:35 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 7.29"
[Sun May 19 06:17:38 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_src67.ximg exists
[Sun May 19 06:17:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_src67.csv
[Sun May 19 06:17:38 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_src67_1.ximg exists
[Sun May 19 06:17:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_src67.csv
[Sun May 19 06:17:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:17:39 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Sun May 19 06:17:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src67.csv
[Sun May 19 06:17:39 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Sun May 19 06:17:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src67.csv
[Sun May 19 06:17:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:18:13 2013] Spatial fit model total counts = 5145.250000, observed total counts = 2264.000000
[Sun May 19 06:18:13 2013] Poor agreement between spatial fit and data for source 69
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 06:18:14 2013] Source 69 is offset by -0.122506 and -5.166406 pixels which is larger than
2 X fitted extent = 1.120823 x 1.120823, not incorporating fit results
[Sun May 19 06:18:14 2013] Warning: source 67 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 69 at 12.399236 pixels away
[Sun May 19 06:18:14 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:18:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:18:14 2013] Assessing source extent using major
[Sun May 19 06:18:14 2013] Source does appear to be extended
[Sun May 19 06:18:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 06:19:16 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun May 19 06:19:16 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Sun May 19 06:19:16 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Sun May 19 06:19:16 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 7.29"
[Sun May 19 06:19:18 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_src60.ximg exists
[Sun May 19 06:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_src60.csv
[Sun May 19 06:19:18 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_src60_1.ximg exists
[Sun May 19 06:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_src60.csv
[Sun May 19 06:19:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:19:20 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Sun May 19 06:19:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src60.csv
[Sun May 19 06:19:20 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Sun May 19 06:19:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src60.csv
[Sun May 19 06:19:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:19:50 2013] Source 69 is offset by 8.462092 and -2.675299 pixels which is larger than
2 X fitted extent = 1.318897 x 1.318897, not incorporating fit results
[Sun May 19 06:19:50 2013] Source 69 is offset by 7.195839 and -5.059482 pixels which is larger than
2 X fitted extent = 0.857798 x 0.857798, not incorporating fit results
[Sun May 19 06:19:50 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:19:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:19:50 2013] Assessing source extent using major
[Sun May 19 06:19:50 2013] Source does appear to be extended
[Sun May 19 06:19:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 06:20:39 2013] XMMSAS src. selection expression = ellipse(24042.749969, 26814.797028, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 06:20:39 2013] Not overwriting source region fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69_src.reg
[Sun May 19 06:20:39 2013] Extracting stamp from image fullrun_pn_xmm0145020201_pi300-10000_cl_sm2.00.img.gz, (239, 271) - (314, 346)
[Sun May 19 06:20:40 2013] XMMSAS bgd. selection expression = annulus(24042.749969, 26814.797028, 1087.500000, 2175.000000, X, Y) && !ellipse(22970.691620, 28832.215729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26234.943939, 28947.905975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24608.467682, 26255.321289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27277.411000, 24559.682000, 1192.360034, 1192.360034, 0.000000, X, Y) && !ellipse(21346.062200, 28831.897800, 858.048025, 858.048025, 0.000000, X, Y) && !ellipse(25171.413544, 28446.219604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25046.369629, 27892.383148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24287.787933, 27882.949829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24878.523987, 27201.610901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24732.624817, 26649.914398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.292725, 26043.691559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25217.603088, 25360.671997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24859.795410, 24835.597473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25987.076000, 24097.044000, 1124.912032, 1124.912032, 0.000000, X, Y)
[Sun May 19 06:20:40 2013] Writing fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69.gif
[Sun May 19 06:20:54 2013] ../../xmm0145020201/products/events/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69_src.evt and ../../xmm0145020201/products/events/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69_bgd.evt exist, delete to re-create
[Sun May 19 06:20:54 2013] Mean detx,y = (-3056.36, 1145.33) 
[Sun May 19 06:20:54 2013] ../../xmm0145020201/products/images/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69_src.img and ../../xmm0145020201/products/images/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69_bgd.img exist, delete to re-create
[Sun May 19 06:20:54 2013] ../../xmm0145020201/products/spectra/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69_src_b10.pi.gz and ../../xmm0145020201/products/spectra/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69_bgd.pi exist, delete to re-create
[Sun May 19 06:20:54 2013] Setting source spectrum file to fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Sun May 19 06:20:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Sun May 19 06:20:54 2013] ../../xmm0145020201/products/lightcurves/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69_src.lc and ../../xmm0145020201/products/lightcurves/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69_bgd.lc exist, delete to re-create
[Sun May 19 06:21:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 06:21:12 2013] rmf not generated due to insufficient counts
[Sun May 19 06:21:12 2013] fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69.arf exists, delete to re-create
[Sun May 19 08:23:29 2013] Updating aperture counts using extracted products
[Sun May 19 08:23:29 2013] Total counts from fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69_src_b10.pi.gz = 1669.00
[Sun May 19 08:23:29 2013] Total counts from fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69_bgd.pi.gz = 5861.00
[Sun May 19 08:23:29 2013] Got source and background scale factors 1299898.000000, 4337575.000000
[Sun May 19 08:23:29 2013] User source parameters:
  Position = (276.9, 308.8) = 0 3 27.41 -35 56 31.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -87.4 +/- 41.9
  Background aperture counts = 1756.4
  Rate = -0.002 +/- 0.0008

[Sun May 19 08:23:29 2013] Updating counts from extracted products
[Sun May 19 08:23:29 2013] Set source signif. to -87.44/41.91 = -2.09
[Sun May 19 08:23:34 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 08:23:34 2013] Using photon index=1.80, rate=-0.00169, arf fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69.arf
[Sun May 19 08:23:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 08:23:34 2013] Updated flux is not positive, keeping original flux
[Sun May 19 08:24:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 08:24:32 2013] xmm0145020201/analysis//spectral/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src69_pl.csv not found, spectral fit skipped or did not complete