[Sun May 19 06:16:43 2013] Detection parameters:
  Position = (162.3, 332.1) = 0 4 8.46 -35 54 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 424.2 +/- 26.0
  Background counts = 50.0
  Rate = 0.008 +/- 0.0005

[Sun May 19 06:16:47 2013] Off-axis axis estimate = 10.17'
[Sun May 19 06:17:35 2013] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Sun May 19 06:17:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 06:17:35 2013] Initial guess for spatial extent in simple fitting = 11.51"
[Sun May 19 06:17:35 2013] source mask rpix=2.6, npix_max = 39, mask sum = 32, frac = 0.808
[Sun May 19 06:17:35 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.51"
[Sun May 19 06:17:36 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 19 06:17:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_src3.csv
[Sun May 19 06:17:36 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 19 06:17:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_src3.csv
[Sun May 19 06:17:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:17:38 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 19 06:17:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 19 06:17:38 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 19 06:17:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 19 06:17:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:18:13 2013] Source 3 is offset by -1.032108 and 6.572116 pixels which is larger than
2 X fitted extent = 8.097380 x 1.677252, not incorporating fit results
[Sun May 19 06:18:14 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:18:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:18:14 2013] Assessing source extent using major
[Sun May 19 06:18:14 2013] Source does appear to be extended
[Sun May 19 06:18:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 06:19:16 2013] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Sun May 19 06:19:16 2013] Initial guess for spatial extent in simple fitting = 11.51"
[Sun May 19 06:19:16 2013] source mask rpix=2.6, npix_max = 39, mask sum = 32, frac = 0.808
[Sun May 19 06:19:16 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 11.51"
[Sun May 19 06:19:17 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 19 06:19:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_src3.csv
[Sun May 19 06:19:17 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 19 06:19:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_src3.csv
[Sun May 19 06:19:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:19:19 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 19 06:19:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 19 06:19:19 2013] fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 19 06:19:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 19 06:19:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:19:49 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.910924 pixels away
[Sun May 19 06:19:50 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:19:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:19:50 2013] Assessing source extent using major
[Sun May 19 06:19:50 2013] Source does appear to be extended
[Sun May 19 06:19:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 06:20:38 2013] XMMSAS src. selection expression = ellipse(14067.386734, 28846.539612, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 06:20:38 2013] Not overwriting source region fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3_src.reg
[Sun May 19 06:20:38 2013] Extracting stamp from image fullrun_pn_xmm0145020201_pi300-10000_cl_sm2.00.img.gz, (125, 295) - (200, 370)
[Sun May 19 06:20:38 2013] XMMSAS bgd. selection expression = annulus(14067.386734, 28846.539612, 1087.500000, 2175.000000, X, Y) && !ellipse(16102.304733, 26400.169067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11275.126938, 27023.620392, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 06:20:38 2013] Writing fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3.gif
[Sun May 19 06:20:41 2013] ../../xmm0145020201/products/events/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0145020201/products/events/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun May 19 06:20:41 2013] Mean detx,y = (-13294.53, 2115.48) 
[Sun May 19 06:20:41 2013] ../../xmm0145020201/products/images/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3_src.img and ../../xmm0145020201/products/images/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun May 19 06:20:41 2013] ../../xmm0145020201/products/spectra/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0145020201/products/spectra/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun May 19 06:20:41 2013] Setting source spectrum file to fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 19 06:20:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May 19 06:20:41 2013] ../../xmm0145020201/products/lightcurves/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0145020201/products/lightcurves/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun May 19 06:21:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 06:21:12 2013] rmf not generated due to insufficient counts
[Sun May 19 06:21:12 2013] fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Sun May 19 08:23:13 2013] Updating aperture counts using extracted products
[Sun May 19 08:23:13 2013] Total counts from fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 622.00
[Sun May 19 08:23:13 2013] Total counts from fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 2479.00
[Sun May 19 08:23:13 2013] Got source and background scale factors 1116562.000000, 10717995.000000
[Sun May 19 08:23:13 2013] User source parameters:
  Position = (162.3, 332.1) = 0 4 8.46 -35 54 49.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 363.7 +/- 26.0
  Background aperture counts = 258.3
  Rate = 0.007 +/- 0.0005

[Sun May 19 08:23:13 2013] Updating counts from extracted products
[Sun May 19 08:23:13 2013] Set source signif. to 363.75/16.07 = 22.63
[Sun May 19 08:23:33 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 08:23:33 2013] Using photon index=1.80, rate=0.00705, arf fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3.arf
[Sun May 19 08:23:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 08:23:33 2013] Updating source flux to 8.2e-14
[Sun May 19 08:24:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 08:24:32 2013] xmm0145020201/analysis//spectral/fullrun_pn_xmm0145020201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete