[Sun May 19 06:16:54 2013] Detection parameters:
  Position = (225.9, 252.0) = 0 3 45.70 -36 0 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.4 +/- 14.4
  Background counts = 17.3
  Rate = 0.004 +/- 0.0004

[Sun May 19 06:16:55 2013] Off-axis axis estimate = 6.24'
[Sun May 19 06:17:44 2013] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Sun May 19 06:17:44 2013] Initial guess for spatial extent in simple fitting = 9.55"
[Sun May 19 06:17:44 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.239
[Sun May 19 06:17:44 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.55"
[Sun May 19 06:17:45 2013] fullrun_mos2_xmm0145020201_pi300-10000_cl_pass0_src13.ximg exists
[Sun May 19 06:17:45 2013] fullrun_mos2_xmm0145020201_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun May 19 06:17:45 2013] Fit fullrun_mos2_xmm0145020201_pi300-10000_cl_pass0_src13 appears to have run properly
[Sun May 19 06:17:46 2013] fullrun_mos2_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun May 19 06:17:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun May 19 06:17:46 2013] fullrun_mos2_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun May 19 06:17:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun May 19 06:17:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:18:44 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 62 at 12.568052 pixels away
[Sun May 19 06:18:44 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:18:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:18:44 2013] Assessing source extent using major
[Sun May 19 06:18:44 2013] Source does appear to be extended
[Sun May 19 06:18:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 06:19:23 2013] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Sun May 19 06:19:23 2013] Initial guess for spatial extent in simple fitting = 9.55"
[Sun May 19 06:19:23 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.239
[Sun May 19 06:19:23 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 9.55"
[Sun May 19 06:19:24 2013] fullrun_mos2_xmm0145020201_pi300-10000_cl_pass1_src10.ximg exists
[Sun May 19 06:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145020201_pi300-10000_cl_pass1_src10.csv
[Sun May 19 06:19:24 2013] fullrun_mos2_xmm0145020201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun May 19 06:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145020201_pi300-10000_cl_pass1_src10.csv
[Sun May 19 06:19:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0145020201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0145020201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:19:25 2013] fullrun_mos2_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun May 19 06:19:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun May 19 06:19:25 2013] fullrun_mos2_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun May 19 06:19:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun May 19 06:19:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:20:15 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 62 at 10.200580 pixels away
[Sun May 19 06:20:16 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:20:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:20:16 2013] Assessing source extent using major
[Sun May 19 06:20:16 2013] Source does appear to be extended
[Sun May 19 06:20:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 06:21:23 2013] XMMSAS src. selection expression = ellipse(19606.336731, 21875.441589, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 06:21:23 2013] Not overwriting source region fullrun_mos2_xmm0145020201_pi300-10000_pass1_cl_src62_src.reg
[Sun May 19 06:21:23 2013] Extracting stamp from image fullrun_mos2_xmm0145020201_pi300-10000_cl_sm2.00.img.gz, (188, 214) - (263, 289)
[Sun May 19 06:21:23 2013] XMMSAS bgd. selection expression = annulus(19606.336731, 21875.441589, 1087.500000, 2175.000000, X, Y)
[Sun May 19 06:21:23 2013] Writing fullrun_mos2_xmm0145020201_pi300-10000_pass1_cl_src62.gif
[Sun May 19 06:21:25 2013] ../../xmm0145020201/products/events/fullrun_mos2_xmm0145020201_pi300-10000_pass1_cl_src62_src.evt and ../../xmm0145020201/products/events/fullrun_mos2_xmm0145020201_pi300-10000_pass1_cl_src62_bgd.evt exist, delete to re-create
[Sun May 19 06:21:25 2013] Mean detx,y = (5973.64, -7402.17) 
[Sun May 19 06:21:25 2013] ../../xmm0145020201/products/images/fullrun_mos2_xmm0145020201_pi300-10000_pass1_cl_src62_src.img and ../../xmm0145020201/products/images/fullrun_mos2_xmm0145020201_pi300-10000_pass1_cl_src62_bgd.img exist, delete to re-create
[Sun May 19 06:21:25 2013] ../../xmm0145020201/products/spectra/fullrun_mos2_xmm0145020201_pi300-10000_pass1_cl_src62_src_b10.pi.gz and ../../xmm0145020201/products/spectra/fullrun_mos2_xmm0145020201_pi300-10000_pass1_cl_src62_bgd.pi exist, delete to re-create
[Sun May 19 06:21:25 2013] Setting source spectrum file to fullrun_mos2_xmm0145020201_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Sun May 19 06:21:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0145020201_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Sun May 19 07:53:06 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 07:53:06 2013] rmf not generated due to insufficient counts
[Sun May 19 08:23:47 2013] Updating aperture counts using extracted products
[Sun May 19 08:23:47 2013] Total counts from fullrun_mos2_xmm0145020201_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 223.00
[Sun May 19 08:23:47 2013] Total counts from fullrun_mos2_xmm0145020201_pi300-10000_pass1_cl_src62_bgd.pi.gz = 896.00
[Sun May 19 08:23:47 2013] Got source and background scale factors 1246672.000000, 9955275.000000
[Sun May 19 08:23:47 2013] User source parameters:
  Position = (225.9, 252.0) = 0 3 45.70 -36 0 39.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 110.8 +/- 16.0
  Background aperture counts = 112.2
  Rate = 0.002 +/- 0.0003

[Sun May 19 08:23:47 2013] Updating counts from extracted products
[Sun May 19 08:23:47 2013] Set source signif. to 110.80/10.59 = 10.46
[Sun May 19 08:23:56 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 08:23:56 2013] Using photon index=1.80, rate=0.00207, arf fullrun_mos2_xmm0145020201_pi300-10000_pass1_cl_src62.arf
[Sun May 19 08:23:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 08:23:56 2013] Updating source flux to 3.4e-14
[Sun May 19 08:24:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 08:24:20 2013] xmm0145020201/analysis//spectral/fullrun_mos2_xmm0145020201_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete