[Sun May 19 06:16:49 2013] Detection parameters: Position = (422.9, 301.7) = 0 2 35.10 -35 57 4.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 128.0 +/- 15.1 Background counts = 21.5 Rate = 0.003 +/- 0.0004 [Sun May 19 06:16:51 2013] Off-axis axis estimate = 9.03' [Sun May 19 06:17:40 2013] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting [Sun May 19 06:17:40 2013] Initial guess for spatial extent in simple fitting = 10.94" [Sun May 19 06:17:40 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.990 [Sun May 19 06:17:40 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 10.94" [Sun May 19 06:17:41 2013] fullrun_mos1_xmm0145020201_pi300-10000_cl_pass0_src18.ximg exists [Sun May 19 06:17:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145020201_pi300-10000_cl_pass0_src18.csv [Sun May 19 06:17:41 2013] fullrun_mos1_xmm0145020201_pi300-10000_cl_pass0_src18_1.ximg exists [Sun May 19 06:17:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145020201_pi300-10000_cl_pass0_src18.csv [Sun May 19 06:17:41 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0145020201_pi300-10000_cl_pass0_src18_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0145020201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 06:17:43 2013] fullrun_mos1_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists [Sun May 19 06:17:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src18.csv [Sun May 19 06:17:43 2013] fullrun_mos1_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists [Sun May 19 06:17:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src18.csv [Sun May 19 06:17:43 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0145020201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 06:18:29 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 13.373797 pixels away [Sun May 19 06:18:29 2013] Vigneting correction estimate = 1.000000 [Sun May 19 06:18:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 06:18:29 2013] Assessing source extent using major [Sun May 19 06:18:29 2013] Source does appear to be extended [Sun May 19 06:18:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 19 06:19:20 2013] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting [Sun May 19 06:19:20 2013] Initial guess for spatial extent in simple fitting = 10.94" [Sun May 19 06:19:20 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.990 [Sun May 19 06:19:20 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 10.94" [Sun May 19 06:19:21 2013] fullrun_mos1_xmm0145020201_pi300-10000_cl_pass1_src18.ximg exists [Sun May 19 06:19:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145020201_pi300-10000_cl_pass1_src18.csv [Sun May 19 06:19:21 2013] fullrun_mos1_xmm0145020201_pi300-10000_cl_pass1_src18_1.ximg exists [Sun May 19 06:19:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145020201_pi300-10000_cl_pass1_src18.csv [Sun May 19 06:19:21 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0145020201_pi300-10000_cl_pass1_src18_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0145020201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 06:19:23 2013] fullrun_mos1_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists [Sun May 19 06:19:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src18.csv [Sun May 19 06:19:23 2013] fullrun_mos1_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists [Sun May 19 06:19:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src18.csv [Sun May 19 06:19:23 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0145020201_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 06:20:02 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 13.373600 pixels away [Sun May 19 06:20:02 2013] Vigneting correction estimate = 1.000000 [Sun May 19 06:20:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 06:20:02 2013] Assessing source extent using major [Sun May 19 06:20:02 2013] Source does appear to be extended [Sun May 19 06:20:02 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 19 06:21:13 2013] XMMSAS src. selection expression = ellipse(36745.602234, 26203.126068, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 19 06:21:13 2013] Not overwriting source region fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28_src.reg [Sun May 19 06:21:13 2013] Extracting stamp from image fullrun_mos1_xmm0145020201_pi300-10000_cl_sm2.00.img.gz, (385, 264) - (460, 339) [Sun May 19 06:21:13 2013] XMMSAS bgd. selection expression = annulus(36745.602234, 26203.126068, 1087.500000, 2175.000000, X, Y) && !ellipse(35182.875885, 27944.084534, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 19 06:21:13 2013] Writing fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28.gif [Sun May 19 06:21:14 2013] ../../xmm0145020201/products/events/fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28_src.evt and ../../xmm0145020201/products/events/fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28_bgd.evt exist, delete to re-create [Sun May 19 06:21:14 2013] Mean detx,y = (2028.06, 8891.51) [Sun May 19 06:21:14 2013] ../../xmm0145020201/products/images/fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28_src.img and ../../xmm0145020201/products/images/fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28_bgd.img exist, delete to re-create [Sun May 19 06:21:14 2013] ../../xmm0145020201/products/spectra/fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28_src_b10.pi.gz and ../../xmm0145020201/products/spectra/fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28_bgd.pi exist, delete to re-create [Sun May 19 06:21:14 2013] Setting source spectrum file to fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28_src_b10.pi.gz [Sun May 19 06:21:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28_bgd.pi.gz [Sun May 19 06:21:14 2013] ../../xmm0145020201/products/lightcurves/fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28_src.lc and ../../xmm0145020201/products/lightcurves/fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28_bgd.lc exist, delete to re-create [Sun May 19 06:21:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun May 19 06:21:23 2013] rmf not generated due to insufficient counts [Sun May 19 06:21:23 2013] fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28.arf exists, delete to re-create [Sun May 19 08:23:37 2013] Updating aperture counts using extracted products [Sun May 19 08:23:37 2013] Total counts from fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 237.00 [Sun May 19 08:23:37 2013] Total counts from fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28_bgd.pi.gz = 1076.00 [Sun May 19 08:23:37 2013] Got source and background scale factors 1218912.000000, 9576464.000000 [Sun May 19 08:23:37 2013] User source parameters: Position = (422.9, 301.7) = 0 2 35.10 -35 57 4.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 100.0 +/- 16.4 Background aperture counts = 137.0 Rate = 0.002 +/- 0.0003 [Sun May 19 08:23:37 2013] Updating counts from extracted products [Sun May 19 08:23:37 2013] Set source signif. to 100.04/11.70 = 8.55 [Sun May 19 08:23:44 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 19 08:23:44 2013] Using photon index=1.80, rate=0.00186, arf fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28.arf [Sun May 19 08:23:44 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 19 08:23:44 2013] Updating source flux to 2.6e-14 [Sun May 19 08:24:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 19 08:24:14 2013] xmm0145020201/analysis//spectral/fullrun_mos1_xmm0145020201_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete