[Sun Feb 19 15:10:15 2012] Detection parameters:
  Position = (344.1, 424.3) = 18 1 2.04 -25 36 55.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.2 +/- 14.3
  Background counts = 10.3
  Rate = 0.01 +/- 0.002

[Sun Feb 19 15:10:18 2012] Off-axis axis estimate = 9.70'
[Mon Feb 20 00:02:11 2012] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 00:02:11 2012] Initial guess for spatial extent in simple fitting = 11.28"
[Mon Feb 20 00:02:11 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.941
[Mon Feb 20 00:02:11 2012] Giving source the simple spatial ID 98 for pass 0, mean size = 11.28"
[Mon Feb 20 07:18:13 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src98.ximg exists
[Mon Feb 20 07:18:13 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src98_1.ximg exists
[Mon Feb 20 07:18:13 2012] Fit fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src98 appears to have run properly
[Mon Feb 20 07:18:16 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Mon Feb 20 07:18:16 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Mon Feb 20 07:18:16 2012] Fit fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src98 appears to have run properly
[Mon Feb 20 07:18:55 2012] Spatial fit model total counts = 314.445000, observed total counts = 324.000000
[Mon Feb 20 07:18:55 2012] Offset between fit and detection position for source 91 = 0.095443 pixels
[Mon Feb 20 07:18:55 2012] 289.546000 total counts/ 162.174000 bgd. counts: snr = 10.001919
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 0.095443 pixels
  Position = (344.1, 424.3) = 18 1 2.02 -25 36 55.5
  Extent = 17.0 (15.0-20.8)" x 2.9 (2.8-3.2)", rotation angle = -0
  Source counts = 127.4 +/- 17.0
  Background counts = 162.2
  Rate = 0.01 +/- 0.002
[Mon Feb 20 07:18:55 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:18:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:18:55 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 07:18:55 2012] Source does appear to be extended
[Mon Feb 20 07:18:55 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.65
[Mon Feb 20 07:18:55 2012] Source is asymmetric
[Mon Feb 20 07:18:56 2012] Source is confused with source 104
[Mon Feb 20 15:41:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 15:41:32 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Mon Feb 20 15:41:32 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.959
[Mon Feb 20 15:41:32 2012] Giving source the simple spatial ID 91 for pass 1, mean size = 9.99"
[Tue Feb 21 00:15:34 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src91.ximg exists
[Tue Feb 21 00:15:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src91.csv
[Tue Feb 21 00:15:34 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src91_1.ximg exists
[Tue Feb 21 00:15:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src91.csv
[Tue Feb 21 00:15:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 00:15:36 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src91.ximg exists
[Tue Feb 21 00:15:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src91.csv
[Tue Feb 21 00:15:36 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src91_1.ximg exists
[Tue Feb 21 00:15:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src91.csv
[Tue Feb 21 00:15:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 00:16:39 2012] Warning, spatial fit 91 centroid is now closest to src. 104
[Tue Feb 21 00:16:39 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 00:16:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 00:16:39 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 00:16:39 2012] Source does appear to be extended
[Tue Feb 21 00:16:39 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.65
[Tue Feb 21 00:16:39 2012] Source is asymmetric
[Tue Feb 21 03:24:56 2012] XMMSAS src. selection expression = ellipse(29890.660260, 36867.642600, 1022.484029, 176.266805, -0.000000, X, Y)
[Tue Feb 21 03:24:56 2012] Writing source region out to fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src91_src.reg
[Tue Feb 21 03:24:56 2012] Extracting stamp from image fullrun_mos2_xmm0144630201_pi300-10000_cl_sm2.00.img.gz, (285, 366) - (403, 483)
[Tue Feb 21 03:24:56 2012] XMMSAS bgd. selection expression = annulus(29890.660260, 36867.642600, 1704.140049, 3408.280098, X, Y) && !ellipse(33380.012756, 34375.887695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29992.085431, 39760.858207, 1224.072035, 301.217996, -0.000000, X, Y) && !ellipse(26042.929600, 40146.281784, 585.719217, 585.719217, 0.000000, X, Y) && !ellipse(31924.002655, 40143.174194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.807556, 36915.686066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.656982, 35067.860016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32539.222702, 36884.249347, 1147.929548, 419.977336, -0.000000, X, Y) && !ellipse(26326.351288, 38912.284027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29564.804688, 39718.935028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30680.986969, 35242.085693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30203.426000, 34743.838400, 1662.264048, 1662.264048, 0.000000, X, Y) && !ellipse(32248.617157, 36822.672424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26042.871155, 34451.176361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34980.088000, 40059.126000, 2145.896062, 2145.896062, 0.000000, X, Y) && !ellipse(34005.410000, 40601.840000, 1557.752045, 1557.752045, 0.000000, X, Y) && !ellipse(29766.124939, 34605.953949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26313.742554, 36298.739563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26784.869537, 36823.787537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32637.661255, 35959.193176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32473.208520, 37625.715600, 1237.584036, 179.152805, 336.917200, X, Y) && !ellipse(26821.925781, 40852.698914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29635.128448, 36152.306732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25966.938000, 36958.543800, 1367.472039, 221.063206, 11.448400, X, Y) && !ellipse(33078.491699, 36130.267334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29596.704000, 40699.680200, 630.733618, 630.733618, 0.000000, X, Y) && !ellipse(30289.983459, 40812.053070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29798.712769, 38683.675385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.446472, 41003.071808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30829.060608, 34817.843872, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 03:24:56 2012] Writing fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src91.gif
[Tue Feb 21 04:06:16 2012] Mean detx,y = (-2841.33, 9351.38) 
[Tue Feb 21 04:06:19 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 04:06:38 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 04:06:38 2012] Setting source spectrum file to fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Tue Feb 21 04:06:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Tue Feb 21 06:27:16 2012] Updating aperture counts using extracted products
[Tue Feb 21 06:27:16 2012] Error reading totcts from fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Tue Feb 21 06:27:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 06:27:26 2012] Using photon index=1.80, rate=0.0148, arf fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src91.arf
[Tue Feb 21 06:27:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 06:27:26 2012] Updating source flux to 3.4e-13
[Tue Feb 21 06:35:56 2012] Flag c found in src. 91 procflags, skipping spectral fitting