[Sun Feb 19 15:10:10 2012] Detection parameters:
  Position = (462.7, 383.0) = 18 0 23.86 -25 39 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 378.0 +/- 24.9
  Background counts = 9.4
  Rate = 0.04 +/- 0.003

[Sun Feb 19 15:10:18 2012] Off-axis axis estimate = 13.40'
[Mon Feb 20 00:02:11 2012] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 00:02:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 00:02:11 2012] Initial guess for spatial extent in simple fitting = 13.13"
[Mon Feb 20 00:02:11 2012] source mask rpix=3.0, npix_max = 49, mask sum = 56, frac = 1.131
[Mon Feb 20 00:02:11 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.13"
[Mon Feb 20 07:18:11 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src11.ximg exists
[Mon Feb 20 07:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src11.csv
[Mon Feb 20 07:18:11 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Feb 20 07:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src11.csv
[Mon Feb 20 07:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 07:18:13 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Feb 20 07:18:13 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Feb 20 07:18:13 2012] Fit fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Feb 20 07:18:55 2012] Spatial fit model total counts = 967.649000, observed total counts = 1049.000000
[Mon Feb 20 07:18:55 2012] Offset between fit and detection position for source 5 = 1.135488 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.135488 pixels
  Position = (462.9, 384.1) = 18 0 23.79 -25 39 49.8
  Extent = 18.6 (18.4-18.7)", rotation angle = 0
  Source counts = 830.7 +/- 28.8
  Background counts = 0.0
  Rate = 0.1 +/- 0.003
 Deleting source due to low signal-to-noise ratio