[Sun Feb 19 15:10:11 2012] Detection parameters:
  Position = (367.5, 462.0) = 18 0 54.51 -25 34 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 246.5 +/- 23.9
  Background counts = 8.1
  Rate = 0.03 +/- 0.003

[Sun Feb 19 15:10:18 2012] Off-axis axis estimate = 12.87'
[Mon Feb 20 00:02:11 2012] Using EEF radius (= 12.86 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 00:02:11 2012] Initial guess for spatial extent in simple fitting = 12.86"
[Mon Feb 20 00:02:11 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.879
[Mon Feb 20 00:02:11 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 12.86"
[Mon Feb 20 07:18:11 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src25.ximg exists
[Mon Feb 20 07:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src25.csv
[Mon Feb 20 07:18:11 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Feb 20 07:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src25.csv
[Mon Feb 20 07:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 07:18:13 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Feb 20 07:18:13 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Feb 20 07:18:13 2012] Fit fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Mon Feb 20 07:18:55 2012] Warning, spatial fit 25 centroid is now closest to src. 62
[Mon Feb 20 07:18:55 2012] Source 17 is offset by -9.125809 and -3.603055 pixels which is larger than
2 X fitted extent = 1.539766 x 1.539766, not incorporating fit results
[Mon Feb 20 07:18:55 2012] Source 17 is offset by 2.578697 and -2.077584 pixels which is larger than
2 X fitted extent = 1.692262 x 1.692262, not incorporating fit results
[Mon Feb 20 07:18:55 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:18:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:18:55 2012] Assessing source extent using major
[Mon Feb 20 07:18:55 2012] Source does appear to be extended
[Mon Feb 20 07:18:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 15:41:32 2012] Using EEF radius (= 12.86 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 15:41:32 2012] Initial guess for spatial extent in simple fitting = 12.86"
[Mon Feb 20 15:41:32 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.879
[Mon Feb 20 15:41:32 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 12.86"
[Tue Feb 21 00:15:33 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src23.ximg exists
[Tue Feb 21 00:15:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src23.csv
[Tue Feb 21 00:15:33 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Feb 21 00:15:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src23.csv
[Tue Feb 21 00:15:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 00:15:35 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Feb 21 00:15:35 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Feb 21 00:15:35 2012] Fit fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Tue Feb 21 00:16:38 2012] Warning, spatial fit 23 centroid is now closest to src. 62
[Tue Feb 21 00:16:38 2012] Source 17 is offset by -9.151441 and -1.140710 pixels which is larger than
2 X fitted extent = 1.549191 x 1.549191, not incorporating fit results
[Tue Feb 21 00:16:39 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 00:16:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 00:16:39 2012] Assessing source extent using major
[Tue Feb 21 00:16:39 2012] Source does appear to be extended
[Tue Feb 21 00:16:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 03:24:52 2012] XMMSAS src. selection expression = ellipse(31924.002655, 40143.174194, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 03:24:52 2012] Writing source region out to fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src17_src.reg
[Tue Feb 21 03:24:52 2012] Extracting stamp from image fullrun_mos2_xmm0144630201_pi300-10000_cl_sm2.00.img.gz, (330, 424) - (405, 499)
[Tue Feb 21 03:24:52 2012] XMMSAS bgd. selection expression = annulus(31924.002655, 40143.174194, 1087.500000, 2175.000000, X, Y) && !ellipse(29992.085431, 39760.858207, 1224.072035, 301.217996, -0.000000, X, Y) && !ellipse(32539.222702, 36884.249347, 1147.929548, 419.977336, -0.000000, X, Y) && !ellipse(31795.547028, 42818.915375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29749.108856, 42236.399292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29564.804688, 39718.935028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31687.317413, 41195.072906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33902.071800, 40093.091000, 366.176811, 366.176811, 0.000000, X, Y) && !ellipse(34980.088000, 40059.126000, 2145.896062, 2145.896062, 0.000000, X, Y) && !ellipse(33455.852000, 42206.540000, 690.652820, 690.652820, 0.000000, X, Y) && !ellipse(34654.291200, 38894.330200, 579.320817, 579.320817, 0.000000, X, Y) && !ellipse(34005.410000, 40601.840000, 1557.752045, 1557.752045, 0.000000, X, Y) && !ellipse(31502.373233, 43382.502856, 1087.422503, 240.876007, 337.791624, X, Y) && !ellipse(32473.208520, 37625.715600, 1237.584036, 179.152805, 336.917200, X, Y) && !ellipse(29596.704000, 40699.680200, 630.733618, 630.733618, 0.000000, X, Y) && !ellipse(30289.983459, 40812.053070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34590.907898, 37952.883881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29890.660260, 36867.642600, 1363.312039, 235.022407, -0.000000, X, Y) && !ellipse(33782.212524, 42311.738403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29798.712769, 38683.675385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34175.108000, 38569.156000, 444.297613, 444.297613, 0.000000, X, Y)
[Tue Feb 21 03:24:52 2012] Writing fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src17.gif
[Tue Feb 21 03:39:12 2012] Mean detx,y = (-4831.62, 12690.06) 
[Tue Feb 21 03:39:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 03:39:22 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 03:39:22 2012] Setting source spectrum file to fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Feb 21 03:39:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Feb 21 05:13:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Feb 21 05:13:08 2012] rmf not generated due to insufficient counts
[Tue Feb 21 06:27:12 2012] Updating aperture counts using extracted products
[Tue Feb 21 06:27:12 2012] Error reading totcts from fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Feb 21 06:27:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 06:27:22 2012] Using photon index=1.80, rate=0.0286, arf fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src17.arf
[Tue Feb 21 06:27:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 06:27:22 2012] Updating source flux to 7.2e-13
[Tue Feb 21 06:35:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting