[Sun Feb 19 15:10:16 2012] Detection parameters:
  Position = (380.8, 415.8) = 18 0 50.23 -25 37 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.4 +/- 11.7
  Background counts = 11.3
  Rate = 0.01 +/- 0.003

[Sun Feb 19 15:10:18 2012] Off-axis axis estimate = 10.40'
[Mon Feb 20 00:02:11 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 00:02:11 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Mon Feb 20 00:02:11 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.894
[Mon Feb 20 00:02:11 2012] Giving source the simple spatial ID 93 for pass 0, mean size = 11.63"
[Mon Feb 20 07:18:13 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src93.ximg exists
[Mon Feb 20 07:18:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src93.csv
[Mon Feb 20 07:18:13 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src93_1.ximg exists
[Mon Feb 20 07:18:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src93.csv
[Mon Feb 20 07:18:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 07:18:15 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Mon Feb 20 07:18:15 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Mon Feb 20 07:18:15 2012] Fit fullrun_mos2_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Mon Feb 20 07:18:55 2012] Source 102 is offset by -7.617774 and 0.240981 pixels which is larger than
2 X fitted extent = 1.592906 x 1.592906, not incorporating fit results
[Mon Feb 20 07:18:55 2012] Warning, spatial fit 93 centroid is now closest to src. 106
[Mon Feb 20 07:18:55 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:18:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:18:55 2012] Assessing source extent using major
[Mon Feb 20 07:18:55 2012] Source does appear to be extended
[Mon Feb 20 07:18:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:18:56 2012] Source is confused with source 105
[Mon Feb 20 15:41:32 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 15:41:32 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Mon Feb 20 15:41:32 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.894
[Mon Feb 20 15:41:32 2012] Giving source the simple spatial ID 86 for pass 1, mean size = 11.63"
[Tue Feb 21 00:15:34 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src86.ximg exists
[Tue Feb 21 00:15:34 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src86_1.ximg exists
[Tue Feb 21 00:15:34 2012] Fit fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_src86 appears to have run properly
[Tue Feb 21 00:15:36 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src86.ximg exists
[Tue Feb 21 00:15:36 2012] fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists
[Tue Feb 21 00:15:36 2012] Fit fullrun_mos2_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src86 appears to have run properly
[Tue Feb 21 00:16:39 2012] Source 102 is offset by -4.646003 and -1.029042 pixels which is larger than
2 X fitted extent = 1.566074 x 1.566074, not incorporating fit results
[Tue Feb 21 00:16:39 2012] Warning: source 86 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 102 at 11.511708 pixels away
[Tue Feb 21 00:16:39 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 00:16:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 00:16:39 2012] Assessing source extent using major
[Tue Feb 21 00:16:39 2012] Source does appear to be extended
[Tue Feb 21 00:16:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 03:24:56 2012] XMMSAS src. selection expression = ellipse(33078.491699, 36130.267334, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 03:24:56 2012] Writing source region out to fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src102_src.reg
[Tue Feb 21 03:24:56 2012] Extracting stamp from image fullrun_mos2_xmm0144630201_pi300-10000_cl_sm2.00.img.gz, (343, 378) - (418, 453)
[Tue Feb 21 03:24:56 2012] XMMSAS bgd. selection expression = annulus(33078.491699, 36130.267334, 1087.500000, 2175.000000, X, Y) && !ellipse(36251.723600, 32774.677000, 1337.744038, 1337.744038, 0.000000, X, Y) && !ellipse(35375.073456, 35439.850861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33380.012756, 34375.887695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32539.222702, 36884.249347, 1147.929548, 419.977336, -0.000000, X, Y) && !ellipse(30680.986969, 35242.085693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30203.426000, 34743.838400, 1662.264048, 1662.264048, 0.000000, X, Y) && !ellipse(32248.617157, 36822.672424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34980.088000, 40059.126000, 2145.896062, 2145.896062, 0.000000, X, Y) && !ellipse(32637.661255, 35959.193176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32473.208520, 37625.715600, 1237.584036, 179.152805, 336.917200, X, Y) && !ellipse(35252.227905, 36680.968201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34590.907898, 37952.883881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29890.660260, 36867.642600, 1363.312039, 235.022407, -0.000000, X, Y) && !ellipse(34175.108000, 38569.156000, 444.297613, 444.297613, 0.000000, X, Y) && !ellipse(34844.712769, 36433.514160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30829.060608, 34817.843872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35229.200836, 37483.761444, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 03:24:56 2012] Writing fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src102.gif
[Tue Feb 21 04:04:23 2012] Mean detx,y = (-5860.76, 8385.23) 
[Tue Feb 21 04:04:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 04:04:40 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 04:04:40 2012] Setting source spectrum file to fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Tue Feb 21 04:04:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Tue Feb 21 06:02:53 2012] Not generating rmf since there are only 66 counts
[Tue Feb 21 06:02:53 2012] rmf not generated due to insufficient counts
[Tue Feb 21 06:27:15 2012] Updating aperture counts using extracted products
[Tue Feb 21 06:27:15 2012] Error reading totcts from fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Tue Feb 21 06:27:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 06:27:25 2012] Using photon index=1.80, rate=0.0146, arf fullrun_mos2_xmm0144630201_pi300-10000_pass1_cl_src102.arf
[Tue Feb 21 06:27:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 06:27:25 2012] Updating source flux to 2.8e-13
[Tue Feb 21 06:35:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting