[Sun Feb 19 15:08:59 2012] Detection parameters:
  Position = (344.0, 475.0) = 18 1 2.07 -25 33 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.0 +/- 13.8
  Background counts = 8.8
  Rate = 0.01 +/- 0.002

[Sun Feb 19 15:09:04 2012] Off-axis axis estimate = 13.22'
[Sun Feb 19 15:27:11 2012] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 15:27:11 2012] Initial guess for spatial extent in simple fitting = 13.04"
[Sun Feb 19 15:27:11 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.002
[Sun Feb 19 15:27:11 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 13.04"
[Mon Feb 20 00:02:08 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src78.ximg exists
[Mon Feb 20 00:02:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src78.csv
[Mon Feb 20 00:02:08 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src78_1.ximg exists
[Mon Feb 20 00:02:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src78.csv
[Mon Feb 20 00:02:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 00:02:11 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Mon Feb 20 00:02:11 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Mon Feb 20 00:02:11 2012] Fit fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src78 appears to have run properly
[Mon Feb 20 07:18:40 2012] Warning, spatial fit 78 centroid is now closest to src. 22
[Mon Feb 20 07:18:40 2012] Source 26 is offset by -9.372353 and 3.159671 pixels which is larger than
2 X fitted extent = 1.559623 x 1.559623, not incorporating fit results
[Mon Feb 20 07:18:40 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:18:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:18:40 2012] Assessing source extent using major
[Mon Feb 20 07:18:40 2012] Source does appear to be extended
[Mon Feb 20 07:18:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:18:40 2012] Source is confused with source 29
[Mon Feb 20 07:23:34 2012] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 07:23:34 2012] Initial guess for spatial extent in simple fitting = 13.04"
[Mon Feb 20 07:23:34 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.002
[Mon Feb 20 07:23:34 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 13.04"
[Mon Feb 20 15:41:28 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_src69.ximg exists
[Mon Feb 20 15:41:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_src69.csv
[Mon Feb 20 15:41:28 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_src69_1.ximg exists
[Mon Feb 20 15:41:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_src69.csv
[Mon Feb 20 15:41:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:41:31 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Mon Feb 20 15:41:31 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Mon Feb 20 15:41:31 2012] Fit fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Tue Feb 21 00:16:08 2012] Warning, spatial fit 69 centroid is now closest to src. 25
[Tue Feb 21 00:16:08 2012] Spatial fit model total counts = 401.373000, observed total counts = 403.000000
[Tue Feb 21 00:16:08 2012] Offset between fit and detection position for source 26 = 1.720651 pixels
[Tue Feb 21 00:16:08 2012] Warning, changing simple spatial fit ID from 69 to 80
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.720651 pixels
  Position = (343.7, 473.3) = 18 1 2.15 -25 33 22.6
  Extent = 19.0 (16.6-20.6)", rotation angle = 0
  Source counts = 393.2 +/- 19.8
  Background counts = 0.0
  Rate = 0.05 +/- 0.002
[Tue Feb 21 00:16:08 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 00:16:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 00:16:08 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 00:16:08 2012] Source does appear to be extended
[Tue Feb 21 00:16:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 00:42:28 2012] XMMSAS src. selection expression = ellipse(29856.108200, 41127.236600, 1140.168033, 1140.168033, 0.000000, X, Y)
[Tue Feb 21 00:42:28 2012] Writing source region out to fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src26_src.reg
[Tue Feb 21 00:42:28 2012] Extracting stamp from image fullrun_mos1_xmm0144630201_pi300-10000_cl_sm2.00.img.gz, (278, 408) - (409, 539)
[Tue Feb 21 00:42:28 2012] XMMSAS bgd. selection expression = annulus(29856.108200, 41127.236600, 1900.280055, 3800.560109, X, Y) && !ellipse(30070.818000, 38720.957200, 1572.200045, 272.940808, 344.964600, X, Y) && !ellipse(26138.162811, 38414.123535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25722.395844, 37027.887604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26663.543580, 38457.608000, 636.732818, 636.732818, 0.000000, X, Y) && !ellipse(26782.299469, 42767.309570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29823.081200, 37111.165600, 1031.408030, 1031.408030, 0.000000, X, Y) && !ellipse(32229.200600, 39537.297400, 1005.288029, 1005.288029, 0.000000, X, Y) && !ellipse(32650.112000, 37062.142000, 412.296812, 412.296812, 0.000000, X, Y) && !ellipse(30490.164703, 38829.848022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29737.870117, 42847.204712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32227.368000, 37888.960000, 737.624021, 737.624021, 0.000000, X, Y) && !ellipse(26416.656000, 40952.460800, 1721.752050, 481.852814, 10.553000, X, Y) && !ellipse(29735.309600, 43145.474000, 1560.904045, 1560.904045, 0.000000, X, Y) && !ellipse(33079.357239, 37327.284637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30543.941000, 37116.247400, 374.829611, 374.829611, 0.000000, X, Y) && !ellipse(32038.864532, 38330.410461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31793.877014, 43600.348907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26096.985962, 41014.013184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26778.531982, 43166.384369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34653.634000, 39272.600000, 1437.304041, 1437.304041, 0.000000, X, Y) && !ellipse(31876.116060, 41851.501000, 1231.000035, 1231.000035, 0.000000, X, Y) && !ellipse(29915.547333, 37415.832520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29744.409454, 40864.104919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25572.058000, 35981.120600, 1701.656049, 1701.656049, 0.000000, X, Y) && !ellipse(26281.799400, 42995.672600, 841.800024, 841.800024, 0.000000, X, Y) && !ellipse(32074.598572, 41619.710327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33234.466705, 42918.295776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33966.898000, 39738.644000, 759.522422, 759.522422, 0.000000, X, Y) && !ellipse(33415.112244, 42359.879395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31618.090179, 41416.165161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32630.503296, 38643.595062, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 00:42:28 2012] Writing fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src26.gif
[Tue Feb 21 01:05:27 2012] Mean detx,y = (13742.54, 2535.06) 
[Tue Feb 21 01:05:31 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 01:05:53 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 01:05:54 2012] Setting source spectrum file to fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Feb 21 01:05:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue Feb 21 06:26:59 2012] Updating aperture counts using extracted products
[Tue Feb 21 06:26:59 2012] Error reading totcts from fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Feb 21 06:27:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 06:27:07 2012] Using photon index=1.80, rate=0.0471, arf fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src26.arf
[Tue Feb 21 06:27:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 06:27:07 2012] Updating source flux to 9.3e-13
[Tue Feb 21 06:27:30 2012] Flag b found in src. 26 procflags, skipping spectral fitting
[Tue Feb 21 06:27:30 2012] Flag c found in src. 26 procflags, skipping spectral fitting