[Sun Feb 19 15:09:03 2012] Detection parameters:
  Position = (227.2, 392.2) = 18 1 39.61 -25 39 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.1 +/- 13.4
  Background counts = 10.1
  Rate = 0.03 +/- 0.003

[Sun Feb 19 15:09:04 2012] Off-axis axis estimate = 8.54'
[Sun Feb 19 15:27:11 2012] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 15:27:11 2012] Initial guess for spatial extent in simple fitting = 10.70"
[Sun Feb 19 15:27:11 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.028
[Sun Feb 19 15:27:11 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.70"
[Mon Feb 20 00:02:07 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src17.ximg exists
[Mon Feb 20 00:02:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src17.csv
[Mon Feb 20 00:02:07 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Feb 20 00:02:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src17.csv
[Mon Feb 20 00:02:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 00:02:09 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Feb 20 00:02:09 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Feb 20 00:02:09 2012] Fit fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Feb 20 07:18:39 2012] Warning, spatial fit 17 centroid is now closest to src. 118
[Mon Feb 20 07:18:40 2012] Spatial fit model total counts = 337.392000, observed total counts = 335.000000
[Mon Feb 20 07:18:40 2012] Offset between fit and detection position for source 130 = 1.224762 pixels
[Mon Feb 20 07:18:40 2012] Warning, changing simple spatial fit ID from 17 to 84
[Mon Feb 20 07:18:40 2012] 346.533500 total counts/ 289.273000 bgd. counts: snr = 3.366675
Spatial fit parameters:
  Offset between fit and detection position for source 130 = 1.224762 pixels
  Position = (226.1, 392.8) = 18 1 39.97 -25 39 12.8
  Extent = 5.7 (4.0-7.5)", rotation angle = 0
  Source counts = 57.3 +/- 18.6
  Background counts = 289.3
  Rate = 0.007 +/- 0.002
[Mon Feb 20 07:18:40 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:18:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:18:40 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 07:18:40 2012] Source does appear to be extended
[Mon Feb 20 07:18:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:18:40 2012] Source is confused with source 134
[Mon Feb 20 07:23:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 07:23:34 2012] Initial guess for spatial extent in simple fitting = 5.71"
[Mon Feb 20 07:23:34 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.217
[Mon Feb 20 07:23:34 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 5.71"
[Mon Feb 20 15:41:27 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_src16.ximg exists
[Mon Feb 20 15:41:27 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon Feb 20 15:41:27 2012] Fit fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_src16 appears to have run properly
[Mon Feb 20 15:41:30 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon Feb 20 15:41:30 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Feb 20 15:41:30 2012] Fit fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Feb 21 00:16:07 2012] Source 130 is offset by -1.121437 and 0.436062 pixels which is larger than
2 X fitted extent = 0.753490 x 5.252966, not incorporating fit results
[Tue Feb 21 00:16:08 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 00:16:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 00:16:08 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 00:16:08 2012] Source does appear to be extended
[Tue Feb 21 00:16:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 00:42:26 2012] XMMSAS src. selection expression = ellipse(19625.560000, 34121.446000, 342.756610, 342.756610, 0.000000, X, Y)
[Tue Feb 21 00:42:26 2012] Writing source region out to fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src130_src.reg
[Tue Feb 21 00:42:26 2012] Extracting stamp from image fullrun_mos1_xmm0144630201_pi300-10000_cl_sm2.00.img.gz, (206, 373) - (246, 412)
[Tue Feb 21 00:42:26 2012] XMMSAS bgd. selection expression = annulus(19625.560000, 34121.446000, 571.261016, 1142.522033, X, Y) && !ellipse(19092.430588, 32732.995392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19255.926000, 32302.573400, 1356.664039, 1356.664039, 0.000000, X, Y) && !ellipse(19537.507751, 33609.202850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19572.332600, 32115.676000, 973.336028, 973.336028, 0.000000, X, Y) && !ellipse(19853.529200, 34647.596000, 411.989612, 411.989612, 0.000000, X, Y) && !ellipse(20846.111954, 35205.074585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20046.452972, 33240.798950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20915.288742, 36130.123962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20574.074000, 34650.442000, 413.968812, 413.968812, 0.000000, X, Y) && !ellipse(20464.030670, 34270.175049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17860.094757, 35602.920105, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 00:42:26 2012] Writing fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src130.gif
[Tue Feb 21 00:46:59 2012] Mean detx,y = (6809.74, -7619.89) 
[Tue Feb 21 00:47:00 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 00:47:10 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 00:47:10 2012] Setting source spectrum file to fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src130_src_b10.pi.gz
[Tue Feb 21 00:47:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src130_bgd.pi.gz
[Tue Feb 21 01:56:00 2012] Not generating rmf since there are only 57 counts
[Tue Feb 21 01:56:00 2012] rmf not generated due to insufficient counts
[Tue Feb 21 06:26:56 2012] Updating aperture counts using extracted products
[Tue Feb 21 06:26:56 2012] Error reading totcts from fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src130_src_b10.pi.gz
[Tue Feb 21 06:27:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 06:27:04 2012] Using photon index=1.80, rate=0.00686, arf fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src130.arf
[Tue Feb 21 06:27:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 06:27:04 2012] Updating source flux to 1.5e-13
[Tue Feb 21 06:27:30 2012] Flag b found in src. 130 procflags, skipping spectral fitting
[Tue Feb 21 06:27:30 2012] Flag c found in src. 130 procflags, skipping spectral fitting
[Tue Feb 21 06:27:30 2012] Source 130 has fewer than 100.000000 counts, skipping spectral fitting