[Sun Feb 19 15:09:03 2012] Detection parameters:
  Position = (378.0, 405.9) = 18 0 51.11 -25 38 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.3 +/- 17.3
  Background counts = 11.4
  Rate = 0.04 +/- 0.003

[Sun Feb 19 15:09:04 2012] Off-axis axis estimate = 9.69'
[Sun Feb 19 15:27:11 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 15:27:11 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Sun Feb 19 15:27:11 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.941
[Sun Feb 19 15:27:11 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.27"
[Mon Feb 20 00:02:06 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src6.ximg exists
[Mon Feb 20 00:02:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src6.csv
[Mon Feb 20 00:02:06 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Feb 20 00:02:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src6.csv
[Mon Feb 20 00:02:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 00:02:09 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Feb 20 00:02:09 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Feb 20 00:02:09 2012] Fit fullrun_mos1_xmm0144630201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Feb 20 07:18:39 2012] Warning, spatial fit 6 centroid is now closest to src. 70
[Mon Feb 20 07:18:40 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:18:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:18:40 2012] Assessing source extent using major
[Mon Feb 20 07:18:40 2012] Source does appear to be extended
[Mon Feb 20 07:18:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:23:34 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 07:23:34 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Mon Feb 20 07:23:34 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.941
[Mon Feb 20 07:23:34 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 11.27"
[Mon Feb 20 15:41:26 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_src6.ximg exists
[Mon Feb 20 15:41:26 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Feb 20 15:41:26 2012] Fit fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_src6 appears to have run properly
[Mon Feb 20 15:41:29 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Feb 20 15:41:29 2012] fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Feb 20 15:41:29 2012] Fit fullrun_mos1_xmm0144630201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Feb 21 00:16:07 2012] Spatial fit model total counts = 404.153000, observed total counts = 404.000000
[Tue Feb 21 00:16:07 2012] Offset between fit and detection position for source 112 = 1.804917 pixels
[Tue Feb 21 00:16:07 2012] 400.263000 total counts/ 117.127000 bgd. counts: snr = 26.161737
Spatial fit parameters:
  Offset between fit and detection position for source 112 = 1.804917 pixels
  Position = (379.6, 406.6) = 18 0 50.59 -25 38 12.5
  Extent = 18.1 (15.8-21.2)" x 2.9 (2.8-3.3)", rotation angle = 331 (329-333) degrees
  Source counts = 283.1 +/- 20.0
  Background counts = 117.1
  Rate = 0.03 +/- 0.002
[Tue Feb 21 00:16:08 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 00:16:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 00:16:08 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 00:16:08 2012] Source does appear to be extended
[Tue Feb 21 00:16:08 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.76
[Tue Feb 21 00:16:08 2012] Source is asymmetric
[Tue Feb 21 00:16:08 2012] Source is confused with source 86
[Tue Feb 21 00:42:25 2012] XMMSAS src. selection expression = ellipse(32980.729600, 35327.115800, 1085.202031, 176.670605, 330.770700, X, Y)
[Tue Feb 21 00:42:25 2012] Writing source region out to fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src112_src.reg
[Tue Feb 21 00:42:25 2012] Extracting stamp from image fullrun_mos1_xmm0144630201_pi300-10000_cl_sm2.00.img.gz, (317, 344) - (442, 469)
[Tue Feb 21 00:42:26 2012] XMMSAS bgd. selection expression = annulus(32980.729600, 35327.115800, 1808.670052, 3617.340104, X, Y) && !ellipse(37003.034200, 32892.433580, 1070.360031, 1070.360031, 0.000000, X, Y) && !ellipse(30070.818000, 38720.957200, 1572.200045, 272.940808, 344.964600, X, Y) && !ellipse(35607.109741, 37014.548737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34317.484000, 35867.812000, 1238.672036, 1238.672036, 0.000000, X, Y) && !ellipse(32722.328400, 36358.833000, 782.885623, 782.885623, 0.000000, X, Y) && !ellipse(34348.262115, 31208.342163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30061.839000, 35225.634000, 1732.360050, 1732.360050, 0.000000, X, Y) && !ellipse(35979.742600, 33747.930600, 425.110412, 425.110412, 0.000000, X, Y) && !ellipse(36653.332000, 34206.809000, 739.980021, 739.980021, 0.000000, X, Y) && !ellipse(36166.999664, 35091.210999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29810.397552, 34377.095734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29823.081200, 37111.165600, 1031.408030, 1031.408030, 0.000000, X, Y) && !ellipse(35984.726593, 34498.146484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33939.775238, 33209.958130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36064.000400, 35806.089600, 696.677620, 696.677620, 0.000000, X, Y) && !ellipse(31081.121124, 34642.734070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32229.200600, 39537.297400, 1005.288029, 1005.288029, 0.000000, X, Y) && !ellipse(32650.112000, 37062.142000, 412.296812, 412.296812, 0.000000, X, Y) && !ellipse(30490.164703, 38829.848022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35437.153351, 38140.599762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37434.732000, 38815.162000, 2064.264059, 693.297620, 313.293000, X, Y) && !ellipse(32227.368000, 37888.960000, 737.624021, 737.624021, 0.000000, X, Y) && !ellipse(35322.058400, 35216.930000, 296.095209, 296.095209, 0.000000, X, Y) && !ellipse(35547.137939, 34666.464722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30489.710000, 35595.142000, 590.240817, 590.240817, 0.000000, X, Y) && !ellipse(33079.357239, 37327.284637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30543.941000, 37116.247400, 374.829611, 374.829611, 0.000000, X, Y) && !ellipse(32038.864532, 38330.410461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30058.704920, 35381.981000, 996.016029, 996.016029, 0.000000, X, Y) && !ellipse(33467.947327, 34217.592194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33903.478333, 33710.009003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35001.627655, 38669.563904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34653.634000, 39272.600000, 1437.304041, 1437.304041, 0.000000, X, Y) && !ellipse(29915.547333, 37415.832520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37200.987549, 31599.212921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28824.380737, 34336.213593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36762.915680, 31280.370453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32630.503296, 38643.595062, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 00:42:26 2012] Writing fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src112.gif
[Tue Feb 21 00:43:56 2012] Mean detx,y = (8009.82, 5639.56) 
[Tue Feb 21 00:43:58 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 00:44:20 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 00:44:20 2012] Setting source spectrum file to fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src112_src_b10.pi.gz
[Tue Feb 21 00:44:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src112_bgd.pi.gz
[Tue Feb 21 06:26:55 2012] Updating aperture counts using extracted products
[Tue Feb 21 06:26:55 2012] Error reading totcts from fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src112_src_b10.pi.gz
[Tue Feb 21 06:27:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 06:27:03 2012] Using photon index=1.80, rate=0.0339, arf fullrun_mos1_xmm0144630201_pi300-10000_pass1_cl_src112.arf
[Tue Feb 21 06:27:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 06:27:03 2012] Updating source flux to 8.6e-13
[Tue Feb 21 06:27:30 2012] Flag c found in src. 112 procflags, skipping spectral fitting