[Tue Jul  3 03:32:06 2012] Detection parameters:
  Position = (152.5, 210.7) = 5 37 22.88 -69 24 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.3 +/- 19.6
  Background counts = 120.2
  Rate = 0.001 +/- 0.0002

[Tue Jul  3 03:32:07 2012] Off-axis axis estimate = 12.34'
[Tue Jul  3 03:33:14 2012] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 03:33:14 2012] Initial guess for spatial extent in simple fitting = 12.60"
[Tue Jul  3 03:33:14 2012] source mask rpix=2.9, npix_max = 46, mask sum = 45, frac = 0.975
[Tue Jul  3 03:33:14 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 12.60"
[Tue Jul  3 04:53:13 2012] fullrun_mos2_xmm0144530101_pi300-10000_cl_pass0_src28.ximg exists
[Tue Jul  3 04:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144530101_pi300-10000_cl_pass0_src28.csv
[Tue Jul  3 04:53:13 2012] fullrun_mos2_xmm0144530101_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue Jul  3 04:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144530101_pi300-10000_cl_pass0_src28.csv
[Tue Jul  3 04:53:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0144530101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0144530101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 04:53:14 2012] fullrun_mos2_xmm0144530101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue Jul  3 04:53:14 2012] fullrun_mos2_xmm0144530101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Jul  3 04:53:14 2012] Fit fullrun_mos2_xmm0144530101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Tue Jul  3 04:53:22 2012] Spatial fit model total counts = 974.925000, observed total counts = 909.000000
[Tue Jul  3 04:53:22 2012] Offset between fit and detection position for source 28 = 2.059680 pixels
[Tue Jul  3 04:53:22 2012] 896.634000 total counts/ 615.449000 bgd. counts: snr = 11.334337
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 2.059680 pixels
  Position = (153.5, 212.5) = 5 37 22.02 -69 23 59.1
  Extent = 25.2 (25.2-25.2)", rotation angle = 0
  Source counts = 281.2 +/- 29.9
  Background counts = 615.4
  Rate = 0.003 +/- 0.0004
[Tue Jul  3 04:53:22 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 04:53:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 04:53:22 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 04:53:22 2012] Source does appear to be extended
[Tue Jul  3 04:53:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 04:53:22 2012] Source is confused with source 26
[Tue Jul  3 04:53:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 04:53:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 04:53:27 2012] Initial guess for spatial extent in simple fitting = 25.19"
[Tue Jul  3 04:53:27 2012] source mask rpix=5.8, npix_max = 158, mask sum = 156, frac = 0.985
[Tue Jul  3 04:53:27 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 25.19"
[Tue Jul  3 06:18:20 2012] fullrun_mos2_xmm0144530101_pi300-10000_cl_pass1_src25.ximg exists
[Tue Jul  3 06:18:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144530101_pi300-10000_cl_pass1_src25.csv
[Tue Jul  3 06:18:20 2012] fullrun_mos2_xmm0144530101_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue Jul  3 06:18:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144530101_pi300-10000_cl_pass1_src25.csv
[Tue Jul  3 06:18:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0144530101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0144530101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 06:18:20 2012] fullrun_mos2_xmm0144530101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue Jul  3 06:18:20 2012] fullrun_mos2_xmm0144530101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Jul  3 06:18:20 2012] Fit fullrun_mos2_xmm0144530101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Tue Jul  3 06:18:27 2012] Warning, spatial fit 25 centroid is now closest to src. 30
[Tue Jul  3 06:18:27 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 06:18:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 06:18:27 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 06:18:27 2012] Source does appear to be extended
[Tue Jul  3 06:18:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 06:18:33 2012] XMMSAS src. selection expression = ellipse(13307.181800, 18441.161000, 1511.514043, 1511.514043, 0.000000, X, Y)
[Tue Jul  3 06:18:33 2012] Writing source region out to fullrun_mos2_xmm0144530101_pi300-10000_pass1_cl_src28_src.reg
[Tue Jul  3 06:18:33 2012] Extracting stamp from image fullrun_mos2_xmm0144530101_pi300-10000_cl_sm2.00.img.gz, (67, 126) - (240, 299)
[Tue Jul  3 06:18:33 2012] XMMSAS bgd. selection expression = annulus(13307.181800, 18441.161000, 2519.190072, 5038.380145, X, Y) && !ellipse(12542.882187, 22632.706390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12701.419296, 18576.646011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12218.784088, 18278.070709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11577.729919, 18238.878494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18107.750580, 13446.254578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13747.796875, 16312.626862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15968.554000, 15476.152000, 704.901620, 704.901620, 0.000000, X, Y) && !ellipse(16351.119476, 15209.330765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15134.117767, 14839.834320, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  3 06:18:33 2012] Writing fullrun_mos2_xmm0144530101_pi300-10000_pass1_cl_src28.gif
[Tue Jul  3 06:33:30 2012] Mean detx,y = (14498.79, 4550.81) 
[Tue Jul  3 06:33:31 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 06:33:56 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 06:33:56 2012] Setting source spectrum file to fullrun_mos2_xmm0144530101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Jul  3 06:33:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0144530101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Jul  3 07:45:17 2012] Updating aperture counts using extracted products
[Tue Jul  3 07:45:17 2012] Error reading totcts from fullrun_mos2_xmm0144530101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Jul  3 07:45:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 07:45:18 2012] Using photon index=1.80, rate=0.00348, arf fullrun_mos2_xmm0144530101_pi300-10000_pass1_cl_src28.arf
[Tue Jul  3 07:45:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 07:45:18 2012] Updating source flux to 1.1e-13
[Tue Jul  3 07:45:19 2012] Flag c found in src. 28 procflags, skipping spectral fitting