[Sun May 12 03:00:00 2013] Detection parameters:
  Position = (284.8, 257.3) = 18 19 21.77 -25 26 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2520.0 +/- 62.7
  Background counts = 207.4
  Rate = 0.06 +/- 0.002

[Sun May 12 03:00:01 2013] Off-axis axis estimate = 3.14'
[Sun May 12 03:05:29 2013] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Sun May 12 03:05:29 2013] Initial guess for spatial extent in simple fitting = 8.00"
[Sun May 12 03:05:29 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.142
[Sun May 12 03:05:29 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.00"
[Sun May 12 03:44:53 2013] fullrun_pn_xmm0144490101_pi300-10000_cl_pass0_src2.ximg exists
[Sun May 12 03:44:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0144490101_pi300-10000_cl_pass0_src2.csv
[Sun May 12 03:44:53 2013] fullrun_pn_xmm0144490101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun May 12 03:44:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0144490101_pi300-10000_cl_pass0_src2.csv
[Sun May 12 03:44:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0144490101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0144490101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 03:44:53 2013] fullrun_pn_xmm0144490101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun May 12 03:44:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0144490101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May 12 03:44:53 2013] fullrun_pn_xmm0144490101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May 12 03:44:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0144490101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May 12 03:44:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0144490101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0144490101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 04:27:54 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.812887 pixels away
[Sun May 12 04:27:54 2013] Vigneting correction estimate = 1.000000
[Sun May 12 04:27:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 04:27:54 2013] Assessing source extent using major
[Sun May 12 04:27:54 2013] Source does appear to be extended
[Sun May 12 04:27:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 04:28:06 2013] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Sun May 12 04:28:06 2013] Initial guess for spatial extent in simple fitting = 8.00"
[Sun May 12 04:28:06 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.142
[Sun May 12 04:28:06 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.00"
[Sun May 12 04:59:17 2013] fullrun_pn_xmm0144490101_pi300-10000_cl_pass1_src2.ximg exists
[Sun May 12 04:59:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0144490101_pi300-10000_cl_pass1_src2.csv
[Sun May 12 04:59:17 2013] fullrun_pn_xmm0144490101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun May 12 04:59:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0144490101_pi300-10000_cl_pass1_src2.csv
[Sun May 12 04:59:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0144490101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0144490101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 04:59:17 2013] fullrun_pn_xmm0144490101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun May 12 04:59:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0144490101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May 12 04:59:17 2013] fullrun_pn_xmm0144490101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May 12 04:59:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0144490101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May 12 04:59:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0144490101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0144490101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 05:36:06 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.812887 pixels away
[Sun May 12 05:36:06 2013] Vigneting correction estimate = 1.000000
[Sun May 12 05:36:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 05:36:06 2013] Assessing source extent using major
[Sun May 12 05:36:06 2013] Source does appear to be extended
[Sun May 12 05:36:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 05:36:18 2013] Counts = 2519.965576, rescaling region sizes by 2.000000
[Sun May 12 05:36:18 2013] XMMSAS src. selection expression = ellipse(24732.096466, 22334.920959, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May 12 05:36:18 2013] Writing source region out to fullrun_pn_xmm0144490101_pi300-10000_pass1_cl_src2_src.reg
[Sun May 12 05:36:18 2013] Extracting stamp from image fullrun_pn_xmm0144490101_pi300-10000_cl_sm2.00.img.gz, (210, 182) - (360, 332)
[Sun May 12 05:36:18 2013] XMMSAS bgd. selection expression = annulus(24732.096466, 22334.920959, 4350.000000, 8700.000000, X, Y) && !ellipse(18949.238600, 19748.200400, 481.044014, 391.617611, 54.404400, X, Y) && !ellipse(32149.377472, 25682.164185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17686.291300, 21374.870200, 442.281613, 315.905609, 37.091758, X, Y) && !ellipse(25925.312400, 21098.431000, 776.065622, 422.191212, 19.517500, X, Y) && !ellipse(20770.156876, 18479.024567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24798.775800, 28780.091400, 452.598099, 452.598099, 0.000000, X, Y) && !ellipse(27898.701600, 28593.144200, 757.142422, 327.565609, 262.897716, X, Y) && !ellipse(18698.803600, 28690.542800, 401.532012, 401.532012, 0.000000, X, Y) && !ellipse(29542.875500, 27748.846000, 335.384810, 335.384810, 0.000000, X, Y) && !ellipse(29735.156677, 27008.040680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29431.390000, 26843.860000, 1293.424037, 252.135207, 148.929000, X, Y) && !ellipse(26228.837372, 25814.528015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31452.201294, 22423.883026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28384.537964, 21656.061829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28330.640869, 15947.143494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30333.172821, 15381.638184, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 05:36:18 2013] Writing fullrun_pn_xmm0144490101_pi300-10000_pass1_cl_src2.gif
[Sun May 12 05:37:34 2013] Mean detx,y = (29.07, -2160.36) 
[Sun May 12 05:37:43 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 05:40:16 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 05:40:16 2013] Setting source spectrum file to fullrun_pn_xmm0144490101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 12 05:40:16 2013] Setting bgd. spectrum file to fullrun_pn_xmm0144490101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun May 12 05:58:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 05:58:54 2013] rmf not generated due to insufficient counts
[Sun May 12 06:37:24 2013] Updating aperture counts using extracted products
[Sun May 12 06:37:24 2013] Total counts from fullrun_pn_xmm0144490101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 4110.00
[Sun May 12 06:37:24 2013] Total counts from fullrun_pn_xmm0144490101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 59650.00
[Sun May 12 06:37:24 2013] Got source and background scale factors 4460628.000000, 132298383.000000
[Sun May 12 06:37:24 2013] User source parameters:
  Position = (284.8, 257.3) = 18 19 21.77 -25 26 1.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2098.8 +/- 65.1
  Background aperture counts = 2011.2
  Rate = 0.06 +/- 0.002

[Sun May 12 06:37:24 2013] Updating counts from extracted products
[Sun May 12 06:37:24 2013] Set source signif. to 2098.82/44.85 = 46.80
[Sun May 12 06:37:28 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 06:37:28 2013] Using photon index=1.80, rate=0.0625, arf fullrun_pn_xmm0144490101_pi300-10000_pass1_cl_src2.arf
[Sun May 12 06:37:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 06:37:28 2013] Updating source flux to 2.4e-13
[Sun May 12 06:37:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 06:37:39 2013] xmm0144490101/analysis//spectral/fullrun_pn_xmm0144490101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete