[Sun May 12 03:00:56 2013] Detection parameters:
  Position = (284.3, 314.4) = 18 19 21.94 -25 21 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.8 +/- 13.6
  Background counts = 68.8
  Rate = 0.002 +/- 0.0004

[Sun May 12 03:00:56 2013] Off-axis axis estimate = 1.55'
[Sun May 12 04:05:00 2013] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Sun May 12 04:05:00 2013] Initial guess for spatial extent in simple fitting = 7.20"
[Sun May 12 04:05:00 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.076
[Sun May 12 04:05:00 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 7.20"
[Sun May 12 04:27:49 2013] fullrun_mos2_xmm0144490101_pi300-10000_cl_pass0_src10.ximg exists
[Sun May 12 04:27:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0144490101_pi300-10000_cl_pass0_src10.csv
[Sun May 12 04:27:49 2013] fullrun_mos2_xmm0144490101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun May 12 04:27:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0144490101_pi300-10000_cl_pass0_src10.csv
[Sun May 12 04:27:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0144490101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0144490101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 04:27:49 2013] fullrun_mos2_xmm0144490101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun May 12 04:27:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0144490101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun May 12 04:27:49 2013] fullrun_mos2_xmm0144490101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun May 12 04:27:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0144490101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun May 12 04:27:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0144490101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0144490101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 04:27:59 2013] Spatial fit model total counts = -1240.140000, observed total counts = 332.000000
[Sun May 12 04:27:59 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 04:27:59 2013] Vigneting correction estimate = 1.000000
[Sun May 12 04:27:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 04:27:59 2013] Assessing source extent using major
[Sun May 12 04:27:59 2013] Source does appear to be extended
[Sun May 12 04:27:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 05:16:02 2013] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Sun May 12 05:16:02 2013] Initial guess for spatial extent in simple fitting = 7.20"
[Sun May 12 05:16:02 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.076
[Sun May 12 05:16:02 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 7.20"
[Sun May 12 05:36:00 2013] fullrun_mos2_xmm0144490101_pi300-10000_cl_pass1_src10.ximg exists
[Sun May 12 05:36:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0144490101_pi300-10000_cl_pass1_src10.csv
[Sun May 12 05:36:00 2013] fullrun_mos2_xmm0144490101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun May 12 05:36:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0144490101_pi300-10000_cl_pass1_src10.csv
[Sun May 12 05:36:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0144490101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0144490101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 05:36:00 2013] fullrun_mos2_xmm0144490101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun May 12 05:36:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0144490101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun May 12 05:36:00 2013] fullrun_mos2_xmm0144490101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun May 12 05:36:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0144490101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun May 12 05:36:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0144490101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0144490101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 05:36:11 2013] Spatial fit model total counts = -623.576000, observed total counts = 332.000000
[Sun May 12 05:36:11 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 05:36:11 2013] Vigneting correction estimate = 1.000000
[Sun May 12 05:36:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 05:36:11 2013] Assessing source extent using major
[Sun May 12 05:36:11 2013] Source does appear to be extended
[Sun May 12 05:36:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 06:22:31 2013] XMMSAS src. selection expression = ellipse(24684.807739, 27307.681976, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 06:22:31 2013] Writing source region out to fullrun_mos2_xmm0144490101_pi300-10000_pass1_cl_src13_src.reg
[Sun May 12 06:22:31 2013] Extracting stamp from image fullrun_mos2_xmm0144490101_pi300-10000_cl_sm2.00.img.gz, (247, 277) - (322, 352)
[Sun May 12 06:22:31 2013] XMMSAS bgd. selection expression = annulus(24684.807739, 27307.681976, 1087.500000, 2175.000000, X, Y)
[Sun May 12 06:22:31 2013] Writing fullrun_mos2_xmm0144490101_pi300-10000_pass1_cl_src13.gif
[Sun May 12 06:25:18 2013] Mean detx,y = (-16.19, -2880.30) 
[Sun May 12 06:25:19 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 06:25:35 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 06:25:35 2013] Setting source spectrum file to fullrun_mos2_xmm0144490101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun May 12 06:25:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0144490101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun May 12 06:31:26 2013] Not generating rmf since there are only 92 counts
[Sun May 12 06:31:26 2013] rmf not generated due to insufficient counts
[Sun May 12 06:37:32 2013] Updating aperture counts using extracted products
[Sun May 12 06:37:32 2013] Total counts from fullrun_mos2_xmm0144490101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 267.00
[Sun May 12 06:37:32 2013] Total counts from fullrun_mos2_xmm0144490101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 1410.00
[Sun May 12 06:37:32 2013] Got source and background scale factors 957674.000000, 6033687.000000
[Sun May 12 06:37:32 2013] User source parameters:
  Position = (284.3, 314.4) = 18 19 21.94 -25 21 46.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 43.2 +/- 17.4
  Background aperture counts = 223.8
  Rate = 0.001 +/- 0.0004

[Sun May 12 06:37:32 2013] Updating counts from extracted products
[Sun May 12 06:37:32 2013] Set source signif. to 43.20/14.96 = 2.89
[Sun May 12 06:37:33 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 06:37:33 2013] Using photon index=1.80, rate=0.001, arf fullrun_mos2_xmm0144490101_pi300-10000_pass1_cl_src13.arf
[Sun May 12 06:37:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 06:37:33 2013] Updating source flux to 1.2e-14
[Sun May 12 06:37:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 06:37:36 2013] xmm0144490101/analysis//spectral/fullrun_mos2_xmm0144490101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete