[Tue May 22 04:18:26 2012] Detection parameters:
  Position = (306.9, 289.0) = 1 2 45.61 -21 53 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 389.5 +/- 32.2
  Background counts = 150.0
  Rate = 0.01 +/- 0.001

[Tue May 22 04:18:26 2012] Off-axis axis estimate = 0.92'
[Tue May 22 08:36:15 2012] Using EEF radius (= 6.89 ")to estimate initial spatial extent for simple fitting
[Tue May 22 08:36:15 2012] Initial guess for spatial extent in simple fitting = 6.89"
[Tue May 22 08:36:15 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.922
[Tue May 22 08:36:15 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.89"
[Tue May 22 12:36:40 2012] fullrun_mos2_xmm0144310101_pi300-10000_cl_pass0_src7.ximg exists
[Tue May 22 12:36:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144310101_pi300-10000_cl_pass0_src7.csv
[Tue May 22 12:36:40 2012] fullrun_mos2_xmm0144310101_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue May 22 12:36:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144310101_pi300-10000_cl_pass0_src7.csv
[Tue May 22 12:36:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0144310101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0144310101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 12:36:42 2012] fullrun_mos2_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue May 22 12:36:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue May 22 12:36:42 2012] fullrun_mos2_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue May 22 12:36:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue May 22 12:36:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 12:37:26 2012] Warning, spatial fit 7 centroid is now closest to src. 26
[Tue May 22 12:37:26 2012] Spatial fit model total counts = 2188.370000, observed total counts = 2179.000000
[Tue May 22 12:37:26 2012] Offset between fit and detection position for source 29 = 0.149350 pixels
[Tue May 22 12:37:26 2012] Warning, changing simple spatial fit ID from 7 to 17
[Tue May 22 12:37:26 2012] 2203.342200 total counts/ 2146.780000 bgd. counts: snr = 1.220766
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.149350 pixels
  Position = (307.1, 289.1) = 1 2 45.57 -21 53 44.6
  Extent = 5.1 (1.7-10.8)", rotation angle = 0
  Source counts = 56.6 +/- 46.9
  Background counts = 2146.8
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability