[Tue May 22 04:17:54 2012] Detection parameters:
  Position = (323.4, 279.1) = 1 2 40.48 -21 54 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.2 +/- 25.4
  Background counts = 153.6
  Rate = 0.005 +/- 0.0008

[Tue May 22 04:17:54 2012] Off-axis axis estimate = 2.29'
[Tue May 22 07:11:42 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Tue May 22 07:11:42 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Tue May 22 07:11:42 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.996
[Tue May 22 07:11:42 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.57"
[Tue May 22 08:36:14 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src17.ximg exists
[Tue May 22 08:36:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src17.csv
[Tue May 22 08:36:14 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue May 22 08:36:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src17.csv
[Tue May 22 08:36:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 08:36:14 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue May 22 08:36:14 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue May 22 08:36:14 2012] Fit fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue May 22 12:37:12 2012] Source 27 is offset by 6.072692 and -4.157091 pixels which is larger than
2 X fitted extent = 4.299927 x 4.299927, not incorporating fit results
[Tue May 22 12:37:12 2012] Warning, spatial fit 17 centroid is now closest to src. 31
[Tue May 22 12:37:12 2012] Vigneting correction estimate = 1.000000
[Tue May 22 12:37:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 12:37:12 2012] Assessing source extent using major
[Tue May 22 12:37:12 2012] Source does appear to be extended
[Tue May 22 12:37:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 12:37:12 2012] Source is confused with source 26
[Tue May 22 15:05:13 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Tue May 22 15:05:13 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Tue May 22 15:05:13 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.996
[Tue May 22 15:05:13 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.57"
[Tue May 22 16:57:43 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src15.ximg exists
[Tue May 22 16:57:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src15.csv
[Tue May 22 16:57:43 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue May 22 16:57:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src15.csv
[Tue May 22 16:57:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 16:57:44 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue May 22 16:57:44 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue May 22 16:57:44 2012] Fit fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue May 22 19:13:28 2012] Source 27 is offset by 6.114995 and -4.088884 pixels which is larger than
2 X fitted extent = 4.250933 x 4.250933, not incorporating fit results
[Tue May 22 19:13:28 2012] Warning, spatial fit 15 centroid is now closest to src. 31
[Tue May 22 19:13:28 2012] Vigneting correction estimate = 1.000000
[Tue May 22 19:13:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 19:13:28 2012] Assessing source extent using major
[Tue May 22 19:13:28 2012] Source does appear to be extended
[Tue May 22 19:13:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 08:53:38 2012] XMMSAS src. selection expression = ellipse(28083.444366, 24234.597076, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 08:53:38 2012] Writing source region out to fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src27_src.reg
[Wed May 23 08:53:38 2012] Extracting stamp from image fullrun_mos1_xmm0144310101_pi300-10000_cl_sm2.00.img.gz, (286, 242) - (361, 317)
[Wed May 23 08:53:38 2012] XMMSAS bgd. selection expression = annulus(28083.444366, 24234.597076, 1087.500000, 2175.000000, X, Y) && !ellipse(27722.247160, 26157.584800, 1095.520032, 1095.520032, 0.000000, X, Y) && !ellipse(26419.378204, 25008.184998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27346.105560, 23977.534485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28525.307617, 24500.259308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26349.688995, 23978.115936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28323.113861, 23652.080994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29460.828430, 24847.730957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25075.511230, 26398.714111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25296.037964, 26925.060394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25290.236725, 24142.462250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24874.050000, 24789.696000, 1103.456032, 1103.456032, 0.000000, X, Y) && !ellipse(26650.336548, 23445.628571, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 08:53:38 2012] Writing fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src27.gif
[Wed May 23 09:09:57 2012] Mean detx,y = (-1146.67, 1305.69) 
[Wed May 23 09:09:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 09:10:09 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 09:10:09 2012] Setting source spectrum file to fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed May 23 09:10:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed May 23 10:04:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 10:04:14 2012] rmf not generated due to insufficient counts
[Wed May 23 15:23:47 2012] Updating aperture counts using extracted products
[Wed May 23 15:23:47 2012] Error reading totcts from fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed May 23 15:23:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 15:23:49 2012] Using photon index=1.80, rate=0.00534, arf fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src27.arf
[Wed May 23 15:23:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 15:23:49 2012] Updating source flux to 5.2e-14
[Wed May 23 15:23:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting