[Tue May 22 04:17:53 2012] Detection parameters:
  Position = (248.5, 245.1) = 1 3 3.88 -21 56 55.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1243.9 +/- 43.9
  Background counts = 48.1
  Rate = 0.05 +/- 0.002

[Tue May 22 04:17:54 2012] Off-axis axis estimate = 5.30'
[Tue May 22 07:11:42 2012] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Tue May 22 07:11:42 2012] Initial guess for spatial extent in simple fitting = 9.08"
[Tue May 22 07:11:42 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.121
[Tue May 22 07:11:42 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.08"
[Tue May 22 08:36:13 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src3.ximg exists
[Tue May 22 08:36:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src3.csv
[Tue May 22 08:36:13 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May 22 08:36:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src3.csv
[Tue May 22 08:36:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 08:36:14 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May 22 08:36:14 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May 22 08:36:14 2012] Fit fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue May 22 12:37:12 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.150692 pixels away
[Tue May 22 12:37:12 2012] Vigneting correction estimate = 1.000000
[Tue May 22 12:37:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 12:37:12 2012] Assessing source extent using major
[Tue May 22 12:37:12 2012] Source does appear to be extended
[Tue May 22 12:37:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 15:05:13 2012] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Tue May 22 15:05:13 2012] Initial guess for spatial extent in simple fitting = 9.08"
[Tue May 22 15:05:13 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.121
[Tue May 22 15:05:13 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.08"
[Tue May 22 16:57:43 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src3.ximg exists
[Tue May 22 16:57:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src3.csv
[Tue May 22 16:57:43 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May 22 16:57:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src3.csv
[Tue May 22 16:57:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 16:57:43 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May 22 16:57:43 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May 22 16:57:43 2012] Fit fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue May 22 19:13:28 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.805692 pixels away
[Tue May 22 19:13:28 2012] Vigneting correction estimate = 1.000000
[Tue May 22 19:13:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 19:13:28 2012] Assessing source extent using major
[Tue May 22 19:13:28 2012] Source does appear to be extended
[Tue May 22 19:13:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 08:53:38 2012] Counts = 1243.890503, rescaling region sizes by 2.000000
[Wed May 23 08:53:38 2012] XMMSAS src. selection expression = ellipse(21570.552628, 21273.049957, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 23 08:53:38 2012] Writing source region out to fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src2_src.reg
[Wed May 23 08:53:38 2012] Extracting stamp from image fullrun_mos1_xmm0144310101_pi300-10000_cl_sm2.00.img.gz, (173, 170) - (323, 320)
[Wed May 23 08:53:38 2012] XMMSAS bgd. selection expression = annulus(21570.552628, 21273.049957, 4350.000000, 8700.000000, X, Y) && !ellipse(27722.247160, 26157.584800, 1095.520032, 1095.520032, 0.000000, X, Y) && !ellipse(23352.871682, 19035.883200, 353.600010, 353.600010, 0.000000, X, Y) && !ellipse(29479.888885, 27361.395874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.378204, 25008.184998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27346.105560, 23977.534485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29142.185089, 27650.528564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28525.307617, 24500.259308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26349.688995, 23978.115936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28650.980774, 28150.983002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27404.335000, 27960.244000, 1228.512035, 1228.512035, 0.000000, X, Y) && !ellipse(28323.113861, 23652.080994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28083.444366, 24234.597076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26626.908569, 28385.958405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29460.828430, 24847.730957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25075.511230, 26398.714111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25296.037964, 26925.060394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26682.460000, 29056.942000, 2457.024071, 2457.024071, 0.000000, X, Y) && !ellipse(25290.236725, 24142.462250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24874.050000, 24789.696000, 1103.456032, 1103.456032, 0.000000, X, Y) && !ellipse(26650.336548, 23445.628571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28630.350000, 29382.206000, 1274.320037, 1274.320037, 0.000000, X, Y)
[Wed May 23 08:53:38 2012] Writing fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src2.gif
[Wed May 23 09:04:19 2012] Mean detx,y = (-7753.07, -1389.53) 
[Wed May 23 09:04:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 09:06:49 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 09:06:49 2012] Setting source spectrum file to fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 23 09:06:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 23 09:42:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 09:42:25 2012] rmf not generated due to insufficient counts
[Wed May 23 15:23:46 2012] Updating aperture counts using extracted products
[Wed May 23 15:23:47 2012] Error reading totcts from fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 23 15:23:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 15:23:48 2012] Using photon index=1.80, rate=0.0549, arf fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src2.arf
[Wed May 23 15:23:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 15:23:48 2012] Updating source flux to 6.7e-13
[Wed May 23 15:23:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting