[Tue May 22 04:17:53 2012] Detection parameters:
  Position = (335.5, 318.4) = 1 2 36.68 -21 51 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 214.7 +/- 26.0
  Background counts = 120.0
  Rate = 0.008 +/- 0.0009

[Tue May 22 04:17:54 2012] Off-axis axis estimate = 3.05'
[Tue May 22 07:11:42 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Tue May 22 07:11:42 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Tue May 22 07:11:42 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.876
[Tue May 22 07:11:42 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.96"
[Tue May 22 08:36:14 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src9.ximg exists
[Tue May 22 08:36:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src9.csv
[Tue May 22 08:36:14 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue May 22 08:36:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src9.csv
[Tue May 22 08:36:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 08:36:14 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue May 22 08:36:14 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue May 22 08:36:14 2012] Fit fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue May 22 12:37:12 2012] Source 15 is offset by 6.839116 and 5.822673 pixels which is larger than
2 X fitted extent = 5.591265 x 5.591265, not incorporating fit results
[Tue May 22 12:37:12 2012] Vigneting correction estimate = 1.000000
[Tue May 22 12:37:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 12:37:12 2012] Assessing source extent using major
[Tue May 22 12:37:12 2012] Source does appear to be extended
[Tue May 22 12:37:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 12:37:12 2012] Source is confused with source 17
[Tue May 22 15:05:13 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Tue May 22 15:05:13 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Tue May 22 15:05:13 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.876
[Tue May 22 15:05:13 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.96"
[Tue May 22 16:57:43 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src9.ximg exists
[Tue May 22 16:57:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src9.csv
[Tue May 22 16:57:43 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue May 22 16:57:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src9.csv
[Tue May 22 16:57:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 16:57:43 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue May 22 16:57:43 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue May 22 16:57:43 2012] Fit fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue May 22 19:13:28 2012] Source 15 is offset by 6.840127 and 5.869018 pixels which is larger than
2 X fitted extent = 5.568736 x 5.568736, not incorporating fit results
[Tue May 22 19:13:28 2012] Vigneting correction estimate = 1.000000
[Tue May 22 19:13:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 19:13:28 2012] Assessing source extent using major
[Tue May 22 19:13:28 2012] Source does appear to be extended
[Tue May 22 19:13:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 08:53:38 2012] XMMSAS src. selection expression = ellipse(29142.185089, 27650.528564, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 08:53:38 2012] Writing source region out to fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src15_src.reg
[Wed May 23 08:53:38 2012] Extracting stamp from image fullrun_mos1_xmm0144310101_pi300-10000_cl_sm2.00.img.gz, (298, 281) - (373, 356)
[Wed May 23 08:53:38 2012] XMMSAS bgd. selection expression = annulus(29142.185089, 27650.528564, 1087.500000, 2175.000000, X, Y) && !ellipse(27722.247160, 26157.584800, 1095.520032, 1095.520032, 0.000000, X, Y) && !ellipse(29479.888885, 27361.395874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.378204, 25008.184998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28650.980774, 28150.983002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27404.335000, 27960.244000, 1228.512035, 1228.512035, 0.000000, X, Y) && !ellipse(26626.908569, 28385.958405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29460.828430, 24847.730957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26682.460000, 29056.942000, 2457.024071, 2457.024071, 0.000000, X, Y) && !ellipse(28630.350000, 29382.206000, 1274.320037, 1274.320037, 0.000000, X, Y)
[Wed May 23 08:53:38 2012] Writing fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src15.gif
[Wed May 23 09:08:12 2012] Mean detx,y = (1951.08, -186.09) 
[Wed May 23 09:08:13 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 09:08:24 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 09:08:24 2012] Setting source spectrum file to fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May 23 09:08:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed May 23 09:51:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 09:51:22 2012] rmf not generated due to insufficient counts
[Wed May 23 15:23:47 2012] Updating aperture counts using extracted products
[Wed May 23 15:23:47 2012] Error reading totcts from fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May 23 15:23:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 15:23:48 2012] Using photon index=1.80, rate=0.00782, arf fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src15.arf
[Wed May 23 15:23:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 15:23:48 2012] Updating source flux to 8.1e-14
[Wed May 23 15:23:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting