[Tue May 22 04:17:53 2012] Detection parameters:
  Position = (319.2, 301.0) = 1 2 41.79 -21 52 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7141.5 +/- 106.3
  Background counts = 150.5
  Rate = 0.2 +/- 0.003

[Tue May 22 04:17:54 2012] Off-axis axis estimate = 1.52'
[Tue May 22 07:11:42 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Tue May 22 07:11:42 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Tue May 22 07:11:42 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.864
[Tue May 22 07:11:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.19"
[Tue May 22 08:36:13 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 22 08:36:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src1.csv
[Tue May 22 08:36:13 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 22 08:36:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src1.csv
[Tue May 22 08:36:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 08:36:14 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 22 08:36:14 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 22 08:36:14 2012] Fit fullrun_mos1_xmm0144310101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 22 12:37:12 2012] Spatial fit model total counts = 15327.000000, observed total counts = 15327.000000
[Tue May 22 12:37:12 2012] Offset between fit and detection position for source 1 = 0.200751 pixels
[Tue May 22 12:37:12 2012] 15528.130000 total counts/ 8765.110000 bgd. counts: snr = 72.237380
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.200751 pixels
  Position = (319.2, 301.2) = 1 2 41.78 -21 52 51.8
  Extent = 13.7 (13.0-14.4)", rotation angle = 0
  Source counts = 6763.0 +/- 124.6
  Background counts = 8765.1
  Rate = 0.3 +/- 0.005
[Tue May 22 12:37:12 2012] Vigneting correction estimate = 1.000000
[Tue May 22 12:37:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 12:37:12 2012] Assessing source extent using major axis lower bound
[Tue May 22 12:37:12 2012] Source does appear to be extended
[Tue May 22 12:37:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 15:05:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 22 15:05:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 22 15:05:13 2012] Initial guess for spatial extent in simple fitting = 13.69"
[Tue May 22 15:05:13 2012] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.920
[Tue May 22 15:05:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.69"
[Tue May 22 16:57:43 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 22 16:57:43 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 22 16:57:43 2012] Fit fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue May 22 16:57:43 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 22 16:57:43 2012] fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 22 16:57:43 2012] Fit fullrun_mos1_xmm0144310101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 22 19:13:28 2012] Warning, spatial fit 1 centroid is now closest to src. 26
[Tue May 22 19:13:28 2012] Vigneting correction estimate = 1.000000
[Tue May 22 19:13:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 19:13:28 2012] Assessing source extent using major axis lower bound
[Tue May 22 19:13:28 2012] Source does appear to be extended
[Tue May 22 19:13:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 08:53:38 2012] Counts = 6763.020000, rescaling region sizes by 2.000000
[Wed May 23 08:53:38 2012] XMMSAS src. selection expression = ellipse(27722.247160, 26157.584800, 1643.280047, 1643.280047, 0.000000, X, Y)
[Wed May 23 08:53:38 2012] Writing source region out to fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src1_src.reg
[Wed May 23 08:53:38 2012] Extracting stamp from image fullrun_mos1_xmm0144310101_pi300-10000_cl_sm2.00.img.gz, (225, 207) - (414, 396)
[Wed May 23 08:53:38 2012] XMMSAS bgd. selection expression = annulus(27722.247160, 26157.584800, 5477.600158, 10955.200315, X, Y) && !ellipse(35515.041290, 14722.695755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21570.552628, 21273.049957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23352.871682, 19035.883200, 353.600010, 353.600010, 0.000000, X, Y) && !ellipse(29479.888885, 27361.395874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.378204, 25008.184998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27346.105560, 23977.534485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29142.185089, 27650.528564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28525.307617, 24500.259308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26349.688995, 23978.115936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28650.980774, 28150.983002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27404.335000, 27960.244000, 1228.512035, 1228.512035, 0.000000, X, Y) && !ellipse(28323.113861, 23652.080994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28083.444366, 24234.597076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26626.908569, 28385.958405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29460.828430, 24847.730957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25075.511230, 26398.714111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25296.037964, 26925.060394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26682.460000, 29056.942000, 2457.024071, 2457.024071, 0.000000, X, Y) && !ellipse(25290.236725, 24142.462250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24874.050000, 24789.696000, 1103.456032, 1103.456032, 0.000000, X, Y) && !ellipse(26650.336548, 23445.628571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27740.868591, 37301.286591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28630.350000, 29382.206000, 1274.320037, 1274.320037, 0.000000, X, Y)
[Wed May 23 08:53:38 2012] Writing fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src1.gif
[Wed May 23 08:53:46 2012] Mean detx,y = (26.07, -204.62) 
[Wed May 23 08:53:48 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 09:01:04 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 09:01:04 2012] Setting source spectrum file to fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 23 09:01:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 23 15:23:46 2012] Updating aperture counts using extracted products
[Wed May 23 15:23:46 2012] Error reading totcts from fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 23 15:23:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 15:23:48 2012] Using photon index=1.80, rate=0.273, arf fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src1.arf
[Wed May 23 15:23:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 15:23:48 2012] Updating source flux to 2.3e-12
[Wed May 23 15:26:00 2012] Reading fit data from xmm0144310101/analysis//spectral/fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src1_pl.csv
[Wed May 23 15:26:00 2012] Spectral fit parameter nH value = 1.18523e+21
[Wed May 23 15:26:00 2012] Spectral fit parameter PhoIndex value = 2.33609
[Wed May 23 15:26:00 2012] Failed to get F(0.3-8.0) from xmm0144310101/analysis//spectral/fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May 23 15:26:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 15:26:00 2012] Using Nh = 1.2e+21, photon index=2.34, rate=0.273, arf fullrun_mos1_xmm0144310101_pi300-10000_pass1_cl_src1.arf
[Wed May 23 15:26:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 15:26:00 2012] Updating source flux to 2.1e-12