[Sat Jul 28 12:52:02 2012] Detection parameters:
  Position = (355.6, 324.4) = 0 42 28.48 61 56 31.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.4 +/- 11.5
  Background counts = 34.3
  Rate = 0.02 +/- 0.003

[Sat Jul 28 12:52:03 2012] Off-axis axis estimate = 4.55'
[Sat Jul 28 12:58:00 2012] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 12:58:00 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Sat Jul 28 12:58:00 2012] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.719
[Sat Jul 28 12:58:00 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.70"
[Sat Jul 28 13:03:36 2012] fullrun_mos1_xmm0144270701_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jul 28 13:03:36 2012] fullrun_mos1_xmm0144270701_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jul 28 13:03:36 2012] Fit fullrun_mos1_xmm0144270701_pi300-10000_cl_pass0_src3 appears to have run properly
[Sat Jul 28 13:03:36 2012] fullrun_mos1_xmm0144270701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jul 28 13:03:36 2012] fullrun_mos1_xmm0144270701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jul 28 13:03:36 2012] Fit fullrun_mos1_xmm0144270701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jul 28 13:06:17 2012] Spatial fit model total counts = 206.384000, observed total counts = 188.000000
[Sat Jul 28 13:06:17 2012] Offset between fit and detection position for source 1 = 4.870321 pixels
[Sat Jul 28 13:06:17 2012] 221.477600 total counts/ 99.595600 bgd. counts: snr = 12.212920
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.870321 pixels
  Position = (351.4, 322.0) = 0 42 31.09 61 56 21.6
  Extent = 17.4 (17.3-34.8)", rotation angle = 0
  Source counts = 121.9 +/- 14.9
  Background counts = 99.6
  Rate = 0.03 +/- 0.004
[Sat Jul 28 13:06:17 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 13:06:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 13:06:17 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 13:06:17 2012] Source does appear to be extended
[Sat Jul 28 13:06:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 13:10:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 13:10:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 28 13:10:26 2012] Initial guess for spatial extent in simple fitting = 17.41"
[Sat Jul 28 13:10:26 2012] source mask rpix=4.0, npix_max = 81, mask sum = 64, frac = 0.789
[Sat Jul 28 13:10:26 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 17.41"
[Sat Jul 28 13:16:58 2012] fullrun_mos1_xmm0144270701_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jul 28 13:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144270701_pi300-10000_cl_pass1_src3.csv
[Sat Jul 28 13:16:58 2012] fullrun_mos1_xmm0144270701_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jul 28 13:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144270701_pi300-10000_cl_pass1_src3.csv
[Sat Jul 28 13:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0144270701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0144270701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 13:16:58 2012] fullrun_mos1_xmm0144270701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jul 28 13:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144270701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jul 28 13:16:58 2012] fullrun_mos1_xmm0144270701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jul 28 13:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0144270701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jul 28 13:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0144270701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0144270701_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 13:19:53 2012] Warning, spatial fit 3 centroid is now closest to src. 1
[Sat Jul 28 13:19:53 2012] Source 3 in spatial fitting is no longer close to this source
[Sat Jul 28 13:19:53 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 13:19:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 13:19:53 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 13:19:53 2012] Source does appear to be extended
[Sat Jul 28 13:19:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 13:22:01 2012] XMMSAS src. selection expression = ellipse(30519.488000, 27965.608000, 1044.492030, 1044.492030, 0.000000, X, Y)
[Sat Jul 28 13:22:01 2012] Writing source region out to fullrun_mos1_xmm0144270701_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 28 13:22:01 2012] Extracting stamp from image fullrun_mos1_xmm0144270701_pi300-10000_cl_sm2.00.img.gz, (291, 262) - (411, 382)
[Sat Jul 28 13:22:01 2012] XMMSAS bgd. selection expression = annulus(30519.488000, 27965.608000, 1740.820050, 3481.640100, X, Y)
[Sat Jul 28 13:22:01 2012] Writing fullrun_mos1_xmm0144270701_pi300-10000_pass1_cl_src1.gif
[Sat Jul 28 13:22:32 2012] Mean detx,y = (-6441.80, -2197.63) 
[Sat Jul 28 13:22:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 13:23:07 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 13:23:07 2012] Setting source spectrum file to fullrun_mos1_xmm0144270701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 28 13:23:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0144270701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 28 13:27:43 2012] Updating aperture counts using extracted products
[Sat Jul 28 13:27:43 2012] Error reading totcts from fullrun_mos1_xmm0144270701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 28 13:27:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 13:27:43 2012] Using photon index=1.80, rate=0.0334, arf fullrun_mos1_xmm0144270701_pi300-10000_pass1_cl_src1.arf
[Sat Jul 28 13:27:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 13:27:43 2012] Updating source flux to 5.2e-13
[Sat Jul 28 13:27:54 2012] Reading fit data from xmm0144270701/analysis//spectral/fullrun_mos1_xmm0144270701_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 28 13:27:54 2012] Spectral fit parameter nH value = 5.1369e+21
[Sat Jul 28 13:27:54 2012] Spectral fit parameter PhoIndex value = 3.95064
[Sat Jul 28 13:27:54 2012] Failed to get F(0.3-8.0) from xmm0144270701/analysis//spectral/fullrun_mos1_xmm0144270701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 28 13:27:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 13:27:54 2012] Using Nh = 5.1e+21, photon index=3.95, rate=0.0334, arf fullrun_mos1_xmm0144270701_pi300-10000_pass1_cl_src1.arf
[Sat Jul 28 13:27:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 13:27:54 2012] Updating source flux to 3.6e-13