[Thu Jul 12 01:46:36 2012] Detection parameters:
  Position = (311.5, 193.7) = 15 3 33.65 -41 57 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.9 +/- 27.2
  Background counts = 331.6
  Rate = 0.009 +/- 0.001

[Thu Jul 12 01:46:42 2012] Off-axis axis estimate = 7.65'
[Thu Jul 12 01:54:04 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 01:54:04 2012] Initial guess for spatial extent in simple fitting = 10.25"
[Thu Jul 12 01:54:04 2012] source mask rpix=2.4, npix_max = 32, mask sum = 27, frac = 0.827
[Thu Jul 12 01:54:04 2012] Giving source the simple spatial ID 92 for pass 0, mean size = 10.25"
[Thu Jul 12 06:50:28 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src92.ximg exists
[Thu Jul 12 06:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src92.csv
[Thu Jul 12 06:50:28 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src92_1.ximg exists
[Thu Jul 12 06:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src92.csv
[Thu Jul 12 06:50:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src92_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 06:50:30 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src92.ximg exists
[Thu Jul 12 06:50:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src92.csv
[Thu Jul 12 06:50:30 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src92_1.ximg exists
[Thu Jul 12 06:50:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src92.csv
[Thu Jul 12 06:50:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src92_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:33:51 2012] Warning, spatial fit 92 centroid is now closest to src. 99
[Thu Jul 12 22:33:51 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:33:51 2012] Assessing source extent using major
[Thu Jul 12 22:33:51 2012] Source does appear to be extended
[Thu Jul 12 22:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:35:19 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 22:35:19 2012] Initial guess for spatial extent in simple fitting = 10.25"
[Thu Jul 12 22:35:19 2012] source mask rpix=2.4, npix_max = 32, mask sum = 27, frac = 0.827
[Thu Jul 12 22:35:19 2012] Giving source the simple spatial ID 88 for pass 1, mean size = 10.25"
[Fri Jul 13 04:58:21 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src88.ximg exists
[Fri Jul 13 04:58:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src88.csv
[Fri Jul 13 04:58:21 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src88_1.ximg exists
[Fri Jul 13 04:58:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src88.csv
[Fri Jul 13 04:58:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src88_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:58:24 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src88.ximg exists
[Fri Jul 13 04:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src88.csv
[Fri Jul 13 04:58:24 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src88_1.ximg exists
[Fri Jul 13 04:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src88.csv
[Fri Jul 13 04:58:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:14:41 2012] Warning, spatial fit 88 centroid is now closest to src. 99
[Fri Jul 13 22:14:41 2012] Spatial fit model total counts = 4059.700000, observed total counts = 3264.000000
[Fri Jul 13 22:14:41 2012] Poor agreement between spatial fit and data for source 96
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 13 22:14:41 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:14:41 2012] Assessing source extent using major
[Fri Jul 13 22:14:41 2012] Source does appear to be extended
[Fri Jul 13 22:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 22:16:19 2012] XMMSAS src. selection expression = ellipse(27051.992035, 16806.001663, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 13 22:16:19 2012] Writing source region out to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src96_src.reg
[Fri Jul 13 22:16:19 2012] Extracting stamp from image fullrun_pn_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (274, 156) - (349, 231)
[Fri Jul 13 22:16:19 2012] XMMSAS bgd. selection expression = annulus(27051.992035, 16806.001663, 1087.500000, 2175.000000, X, Y) && !ellipse(20044.016000, 24416.318000, 8401.488242, 8401.488242, 0.000000, X, Y) && !ellipse(27920.740000, 19102.840000, 1539.336044, 1539.336044, 0.000000, X, Y) && !ellipse(28130.584412, 18581.202042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29659.700000, 17047.948000, 1641.960047, 1086.056031, 219.531000, X, Y) && !ellipse(30092.539551, 17435.575485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28226.882324, 15879.547775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29807.477020, 15444.267670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27275.617188, 14813.438019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23464.592400, 15022.296200, 1720.344050, 848.752024, 248.443000, X, Y) && !ellipse(29599.402374, 14488.170380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27799.348267, 14045.766830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25889.367981, 19840.308533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25138.000000, 19296.773590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29448.771942, 18830.125641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24119.358185, 18650.348297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29781.930328, 18212.167572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28276.374725, 17971.985657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28136.114838, 17196.370621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.978851, 16526.549210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29142.928497, 16122.940948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26937.955872, 15791.518951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29389.986938, 15191.711990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27235.162506, 14397.771942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.002655, 14410.437759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28553.631470, 14123.224655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29186.481598, 13871.489380, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 22:16:19 2012] Writing fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src96.gif
[Sat Jul 14 01:43:18 2012] Mean detx,y = (-2631.03, 10539.80) 
[Sat Jul 14 01:43:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 01:43:50 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 01:43:51 2012] Setting source spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Sat Jul 14 01:43:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Sat Jul 14 05:13:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 05:13:47 2012] rmf not generated due to insufficient counts
[Sat Jul 14 20:24:37 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:37 2012] Error reading totcts from fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Sat Jul 14 20:24:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:42 2012] Using photon index=1.80, rate=0.0087, arf fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src96.arf
[Sat Jul 14 20:24:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:42 2012] Updating source flux to 7.9e-14
[Sat Jul 14 20:44:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting