[Thu Jul 12 01:46:36 2012] Detection parameters:
  Position = (321.0, 381.9) = 15 3 29.97 -41 43 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 620.9 +/- 38.2
  Background counts = 536.3
  Rate = 0.04 +/- 0.003

[Thu Jul 12 01:46:42 2012] Off-axis axis estimate = 6.27'
[Thu Jul 12 01:54:04 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 01:54:04 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Thu Jul 12 01:54:04 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.858
[Thu Jul 12 01:54:04 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 9.56"
[Thu Jul 12 06:50:28 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src75.ximg exists
[Thu Jul 12 06:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src75.csv
[Thu Jul 12 06:50:28 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src75_1.ximg exists
[Thu Jul 12 06:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src75.csv
[Thu Jul 12 06:50:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 06:50:30 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Thu Jul 12 06:50:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src75.csv
[Thu Jul 12 06:50:30 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Thu Jul 12 06:50:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src75.csv
[Thu Jul 12 06:50:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:33:51 2012] Warning, spatial fit 75 centroid is now closest to src. 22
[Thu Jul 12 22:33:51 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:33:51 2012] Assessing source extent using major
[Thu Jul 12 22:33:51 2012] Source does appear to be extended
[Thu Jul 12 22:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:33:52 2012] Source is confused with source 74
[Thu Jul 12 22:35:19 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 22:35:19 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Thu Jul 12 22:35:19 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.858
[Thu Jul 12 22:35:19 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 9.56"
[Fri Jul 13 04:58:21 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src72.ximg exists
[Fri Jul 13 04:58:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src72.csv
[Fri Jul 13 04:58:21 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src72_1.ximg exists
[Fri Jul 13 04:58:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src72.csv
[Fri Jul 13 04:58:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:58:23 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Fri Jul 13 04:58:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src72.csv
[Fri Jul 13 04:58:23 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Fri Jul 13 04:58:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src72.csv
[Fri Jul 13 04:58:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:14:40 2012] Source 75 is offset by 3.488086 and 2.409528 pixels which is larger than
2 X fitted extent = 2.316791 x 2.316791, not incorporating fit results
[Fri Jul 13 22:14:40 2012] Source 75 is offset by 0.612178 and -6.454748 pixels which is larger than
2 X fitted extent = 2.458759 x 2.458759, not incorporating fit results
[Fri Jul 13 22:14:41 2012] Spatial fit model total counts = 9063.310000, observed total counts = 6274.000000
[Fri Jul 13 22:14:41 2012] Poor agreement between spatial fit and data for source 75
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 13 22:14:41 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:14:41 2012] Assessing source extent using major
[Fri Jul 13 22:14:41 2012] Source does appear to be extended
[Fri Jul 13 22:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 22:16:18 2012] XMMSAS src. selection expression = ellipse(27880.451447, 33174.640930, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 13 22:16:18 2012] Writing source region out to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src75_src.reg
[Fri Jul 13 22:16:18 2012] Extracting stamp from image fullrun_pn_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (284, 344) - (359, 419)
[Fri Jul 13 22:16:18 2012] XMMSAS bgd. selection expression = annulus(27880.451447, 33174.640930, 1087.500000, 2175.000000, X, Y) && !ellipse(20044.016000, 24416.318000, 8401.488242, 8401.488242, 0.000000, X, Y) && !ellipse(25959.104000, 34533.528000, 1612.488046, 1612.488046, 0.000000, X, Y) && !ellipse(29568.828000, 35339.101800, 1711.296049, 1711.296049, 0.000000, X, Y) && !ellipse(28358.208000, 34940.568000, 1707.464049, 1707.464049, 0.000000, X, Y) && !ellipse(31250.881400, 34135.812000, 1691.104049, 1691.104049, 0.000000, X, Y) && !ellipse(27029.524000, 32740.374000, 1527.224044, 1527.224044, 0.000000, X, Y) && !ellipse(25002.566956, 33015.647156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26154.815155, 32236.741211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24632.462000, 30649.884000, 1397.072040, 1397.072040, 0.000000, X, Y) && !ellipse(25380.046000, 31475.314000, 2794.144080, 2794.144080, 0.000000, X, Y) && !ellipse(28847.285675, 35705.287415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28966.000000, 33638.729431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28515.720000, 33313.932000, 1582.160046, 1582.160046, 0.000000, X, Y) && !ellipse(29634.939941, 33872.749023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27997.190430, 30488.356628, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 22:16:18 2012] Writing fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src75.gif
[Sat Jul 14 01:17:57 2012] Mean detx,y = (2738.78, -4937.36) 
[Sat Jul 14 01:17:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 01:18:29 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 01:18:29 2012] Setting source spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Sat Jul 14 01:18:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Sat Jul 14 04:50:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 04:50:31 2012] rmf not generated due to insufficient counts
[Sat Jul 14 20:24:37 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:37 2012] Error reading totcts from fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Sat Jul 14 20:24:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:42 2012] Using photon index=1.80, rate=0.0415, arf fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src75.arf
[Sat Jul 14 20:24:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:42 2012] Updating source flux to 1.6e-13
[Sat Jul 14 20:44:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting