[Thu Jul 12 01:46:35 2012] Detection parameters:
  Position = (217.6, 211.0) = 15 4 10.25 -41 55 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 739.9 +/- 45.3
  Background counts = 314.1
  Rate = 0.03 +/- 0.002

[Thu Jul 12 01:46:42 2012] Off-axis axis estimate = 8.63'
[Thu Jul 12 01:54:04 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 01:54:04 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Thu Jul 12 01:54:04 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.020
[Thu Jul 12 01:54:04 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 10.74"
[Thu Jul 12 06:50:27 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src51.ximg exists
[Thu Jul 12 06:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src51.csv
[Thu Jul 12 06:50:27 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src51_1.ximg exists
[Thu Jul 12 06:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src51.csv
[Thu Jul 12 06:50:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 06:50:29 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Thu Jul 12 06:50:29 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Thu Jul 12 06:50:29 2012] Fit fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Thu Jul 12 22:33:51 2012] Warning, spatial fit 51 centroid is now closest to src. 49
[Thu Jul 12 22:33:51 2012] Spatial fit model total counts = 4935.510000, observed total counts = 4934.000000
[Thu Jul 12 22:33:51 2012] Offset between fit and detection position for source 51 = 4.752148 pixels
[Thu Jul 12 22:33:51 2012] Warning, changing simple spatial fit ID from 51 to 89
[Thu Jul 12 22:33:51 2012] 4801.812000 total counts/ 4485.580000 bgd. counts: snr = 4.721680
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 4.752148 pixels
  Position = (221.1, 207.8) = 15 4 8.89 -41 56 11.4
  Extent = 21.3 (20.3-21.9)", rotation angle = 0
  Source counts = 316.2 +/- 69.3
  Background counts = 4485.6
  Rate = 0.02 +/- 0.004
[Thu Jul 12 22:33:51 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:33:51 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 22:33:51 2012] Source does appear to be extended
[Thu Jul 12 22:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:33:52 2012] Source is confused with source 49
[Thu Jul 12 22:35:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 12 22:35:19 2012] Initial guess for spatial extent in simple fitting = 21.31"
[Thu Jul 12 22:35:19 2012] source mask rpix=4.9, npix_max = 116, mask sum = 121, frac = 1.038
[Thu Jul 12 22:35:19 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 21.31"
[Fri Jul 13 04:58:20 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src49.ximg exists
[Fri Jul 13 04:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src49.csv
[Fri Jul 13 04:58:20 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri Jul 13 04:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src49.csv
[Fri Jul 13 04:58:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:58:23 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri Jul 13 04:58:23 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri Jul 13 04:58:23 2012] Fit fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Fri Jul 13 22:14:41 2012] Source 51 is offset by 1.154782 and -2.590598 pixels which is larger than
2 X fitted extent = 1.271435 x 1.271435, not incorporating fit results
[Fri Jul 13 22:14:41 2012] Warning, spatial fit 49 centroid is now closest to src. 230
[Fri Jul 13 22:14:41 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:14:41 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 22:14:41 2012] Source does appear to be extended
[Fri Jul 13 22:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 22:16:16 2012] XMMSAS src. selection expression = ellipse(19188.348000, 18028.656000, 1278.396037, 1278.396037, 0.000000, X, Y)
[Fri Jul 13 22:16:16 2012] Writing source region out to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src51_src.reg
[Fri Jul 13 22:16:16 2012] Extracting stamp from image fullrun_pn_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (148, 134) - (295, 281)
[Fri Jul 13 22:16:16 2012] XMMSAS bgd. selection expression = annulus(19188.348000, 18028.656000, 2130.660061, 4261.320123, X, Y) && !ellipse(19499.830231, 22992.582336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19180.741466, 22064.698180, 1536.408044, 774.424188, 90.000000, X, Y) && !ellipse(20044.016000, 24416.318000, 8401.488242, 8401.488242, 0.000000, X, Y) && !ellipse(19069.735600, 21437.388000, 1309.760038, 1309.760038, 0.000000, X, Y) && !ellipse(21765.996200, 21073.579400, 1392.784040, 1392.784040, 0.000000, X, Y) && !ellipse(18919.730225, 20137.427551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18821.970718, 19619.736664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18999.504562, 18835.273743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18235.452179, 18477.928040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18830.177400, 17391.498000, 1715.152049, 1123.216032, 90.572153, X, Y) && !ellipse(18221.086282, 18171.242000, 1515.920044, 1515.920044, 0.000000, X, Y) && !ellipse(18837.238500, 17184.103980, 800.712023, 800.712023, 0.000000, X, Y) && !ellipse(18862.661697, 14903.884247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19996.635330, 13443.279617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23029.465000, 22764.560000, 757.792822, 757.792822, 0.000000, X, Y) && !ellipse(21336.318000, 22410.032000, 1007.312029, 1007.312029, 0.000000, X, Y) && !ellipse(21986.031525, 21612.265793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22588.055200, 21534.692600, 810.296023, 810.296023, 0.000000, X, Y) && !ellipse(21054.357849, 20051.555939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19735.440186, 17803.655472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19670.119827, 17089.049026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18798.018372, 16573.774216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18785.999054, 15874.631989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18554.035400, 15452.828000, 1849.544053, 1849.544053, 0.000000, X, Y) && !ellipse(19995.419327, 15435.301636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18406.809097, 14755.619446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23464.592400, 15022.296200, 1720.344050, 848.752024, 248.443000, X, Y) && !ellipse(18593.447037, 13973.183640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19275.942230, 13412.695007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20452.684000, 13403.568800, 1948.928056, 1948.928056, 0.000000, X, Y) && !ellipse(18897.370895, 13267.391891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22193.447723, 20323.099060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24119.358185, 18650.348297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23235.005096, 16217.036514, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 22:16:16 2012] Writing fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src51.gif
[Sat Jul 14 00:35:37 2012] Mean detx,y = (-9727.99, 7104.28) 
[Sat Jul 14 00:35:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 00:36:40 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 00:36:40 2012] Setting source spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sat Jul 14 00:36:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Sat Jul 14 20:24:36 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:36 2012] Error reading totcts from fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sat Jul 14 20:24:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:41 2012] Using photon index=1.80, rate=0.0191, arf fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src51.arf
[Sat Jul 14 20:24:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:41 2012] Updating source flux to 9.7e-14
[Sat Jul 14 20:44:28 2012] Flag b found in src. 51 procflags, skipping spectral fitting
[Sat Jul 14 20:44:28 2012] Flag c found in src. 51 procflags, skipping spectral fitting