[Thu Jul 12 01:46:35 2012] Detection parameters:
  Position = (263.5, 293.0) = 15 3 52.35 -41 49 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 826.0 +/- 48.4
  Background counts = 489.1
  Rate = 0.05 +/- 0.003

[Thu Jul 12 01:46:42 2012] Off-axis axis estimate = 2.56'
[Thu Jul 12 01:54:04 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 01:54:04 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Thu Jul 12 01:54:04 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.871
[Thu Jul 12 01:54:04 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 7.71"
[Thu Jul 12 06:50:27 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src41.ximg exists
[Thu Jul 12 06:50:27 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src41_1.ximg exists
[Thu Jul 12 06:50:27 2012] Fit fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src41 appears to have run properly
[Thu Jul 12 06:50:29 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Thu Jul 12 06:50:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src41.csv
[Thu Jul 12 06:50:29 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Thu Jul 12 06:50:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src41.csv
[Thu Jul 12 06:50:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:33:51 2012] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 11.897766 pixels away
[Thu Jul 12 22:33:51 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:33:51 2012] Assessing source extent using major
[Thu Jul 12 22:33:51 2012] Source does appear to be extended
[Thu Jul 12 22:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:35:19 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 22:35:19 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Thu Jul 12 22:35:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.871
[Thu Jul 12 22:35:19 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 7.71"
[Fri Jul 13 04:58:20 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src40.ximg exists
[Fri Jul 13 04:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src40.csv
[Fri Jul 13 04:58:20 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri Jul 13 04:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src40.csv
[Fri Jul 13 04:58:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:58:23 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri Jul 13 04:58:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src40.csv
[Fri Jul 13 04:58:23 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri Jul 13 04:58:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src40.csv
[Fri Jul 13 04:58:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:14:41 2012] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 10.434184 pixels away
[Fri Jul 13 22:14:41 2012] Warning: source 74 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 23.625603 pixels away
[Fri Jul 13 22:14:41 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:14:41 2012] Assessing source extent using major
[Fri Jul 13 22:14:41 2012] Source does appear to be extended
[Fri Jul 13 22:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 22:16:15 2012] XMMSAS src. selection expression = ellipse(22874.993744, 25443.378815, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 13 22:16:15 2012] Writing source region out to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src41_src.reg
[Fri Jul 13 22:16:15 2012] Extracting stamp from image fullrun_pn_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (226, 256) - (301, 331)
[Fri Jul 13 22:16:15 2012] XMMSAS bgd. selection expression = annulus(22874.993744, 25443.378815, 1087.500000, 2175.000000, X, Y) && !ellipse(20317.997800, 25160.640800, 1400.248040, 1400.248040, 0.000000, X, Y) && !ellipse(19180.741466, 22064.698180, 1536.408044, 774.424188, 90.000000, X, Y) && !ellipse(20044.016000, 24416.318000, 8401.488242, 8401.488242, 0.000000, X, Y) && !ellipse(22305.861664, 28480.851807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22081.852000, 28207.544000, 1323.800038, 1323.800038, 0.000000, X, Y) && !ellipse(20936.759964, 27876.336151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22436.597961, 26652.208344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21023.429413, 26572.427368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20134.495071, 26310.946808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22479.503235, 26143.515350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20765.992600, 25782.040400, 687.531220, 687.531220, 0.000000, X, Y) && !ellipse(21279.874000, 24983.506000, 1298.096037, 1298.096037, 0.000000, X, Y) && !ellipse(20099.322200, 25936.237600, 607.869617, 607.869617, 0.000000, X, Y) && !ellipse(22107.092200, 23863.351600, 744.208821, 744.208821, 0.000000, X, Y) && !ellipse(20146.782547, 27209.589264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23029.465000, 22764.560000, 757.792822, 757.792822, 0.000000, X, Y) && !ellipse(21336.318000, 22410.032000, 1007.312029, 1007.312029, 0.000000, X, Y) && !ellipse(25433.494141, 25552.564240, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 22:16:15 2012] Writing fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src41.gif
[Sat Jul 14 00:25:18 2012] Mean detx,y = (-4209.91, 1047.67) 
[Sat Jul 14 00:25:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 00:25:50 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 00:25:51 2012] Setting source spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sat Jul 14 00:25:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Sat Jul 14 04:11:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 04:11:46 2012] rmf not generated due to insufficient counts
[Sat Jul 14 20:24:36 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:36 2012] Error reading totcts from fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sat Jul 14 20:24:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:41 2012] Using photon index=1.80, rate=0.0478, arf fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src41.arf
[Sat Jul 14 20:24:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:41 2012] Updating source flux to 1.7e-13
[Sat Jul 14 20:44:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting