[Thu Jul 12 01:46:34 2012] Detection parameters:
  Position = (250.2, 353.9) = 15 3 57.49 -41 45 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1538.8 +/- 55.6
  Background counts = 199.1
  Rate = 0.09 +/- 0.003

[Thu Jul 12 01:46:42 2012] Off-axis axis estimate = 5.33'
[Thu Jul 12 01:54:04 2012] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 01:54:04 2012] Initial guess for spatial extent in simple fitting = 9.09"
[Thu Jul 12 01:54:04 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.932
[Thu Jul 12 01:54:04 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.09"
[Thu Jul 12 06:50:27 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src27.ximg exists
[Thu Jul 12 06:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src27.csv
[Thu Jul 12 06:50:27 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Jul 12 06:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src27.csv
[Thu Jul 12 06:50:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 06:50:29 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Jul 12 06:50:29 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Jul 12 06:50:29 2012] Fit fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Thu Jul 12 22:33:50 2012] Spatial fit model total counts = 7807.500000, observed total counts = 7441.000000
[Thu Jul 12 22:33:50 2012] Offset between fit and detection position for source 27 = 2.780649 pixels
[Thu Jul 12 22:33:50 2012] 8150.698000 total counts/ 7189.630000 bgd. counts: snr = 11.334460
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.780649 pixels
  Position = (249.5, 351.2) = 15 3 57.79 -41 45 47.7
  Extent = 10.4 (9.3-12.1)", rotation angle = 0
  Source counts = 961.1 +/- 90.3
  Background counts = 7189.6
  Rate = 0.06 +/- 0.005
[Thu Jul 12 22:33:51 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:33:51 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 22:33:51 2012] Source does appear to be extended
[Thu Jul 12 22:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:35:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 12 22:35:19 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Thu Jul 12 22:35:19 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.892
[Thu Jul 12 22:35:19 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 10.44"
[Fri Jul 13 04:58:20 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src26.ximg exists
[Fri Jul 13 04:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src26.csv
[Fri Jul 13 04:58:20 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Jul 13 04:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src26.csv
[Fri Jul 13 04:58:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:58:22 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Jul 13 04:58:22 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Jul 13 04:58:22 2012] Fit fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Fri Jul 13 22:14:41 2012] Spatial fit model total counts = 8245.100000, observed total counts = 5846.000000
[Fri Jul 13 22:14:41 2012] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 13 22:14:41 2012] Warning, spatial fit 26 centroid is now closest to src. 24
[Fri Jul 13 22:14:41 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:14:41 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 22:14:41 2012] Source does appear to be extended
[Fri Jul 13 22:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 22:16:13 2012] XMMSAS src. selection expression = ellipse(21655.826000, 30504.986000, 626.262018, 626.262018, 0.000000, X, Y)
[Fri Jul 13 22:16:13 2012] Writing source region out to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src27_src.reg
[Fri Jul 13 22:16:13 2012] Extracting stamp from image fullrun_pn_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (213, 315) - (285, 387)
[Fri Jul 13 22:16:13 2012] XMMSAS bgd. selection expression = annulus(21655.826000, 30504.986000, 1043.770030, 2087.540060, X, Y) && !ellipse(21144.885200, 28514.516820, 691.952820, 691.952820, 0.000000, X, Y) && !ellipse(20044.016000, 24416.318000, 8401.488242, 8401.488242, 0.000000, X, Y) && !ellipse(24087.205400, 33679.096000, 1306.360038, 1306.360038, 0.000000, X, Y) && !ellipse(23100.612823, 33265.881012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24398.831879, 32493.185181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24632.462000, 30649.884000, 1397.072040, 1397.072040, 0.000000, X, Y) && !ellipse(21985.880188, 31169.029144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25380.046000, 31475.314000, 2794.144080, 2794.144080, 0.000000, X, Y) && !ellipse(23550.032288, 31630.558197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21345.862000, 29052.432000, 1395.280040, 1395.280040, 0.000000, X, Y) && !ellipse(22610.616547, 28829.762482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.699463, 30237.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22305.861664, 28480.851807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22081.852000, 28207.544000, 1323.800038, 1323.800038, 0.000000, X, Y) && !ellipse(20936.759964, 27876.336151, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 22:16:13 2012] Writing fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src27.gif
[Fri Jul 13 23:53:23 2012] Mean detx,y = (-3785.27, -4059.76) 
[Fri Jul 13 23:53:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 23:53:41 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 23:53:41 2012] Setting source spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Jul 13 23:53:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat Jul 14 20:24:35 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:35 2012] Error reading totcts from fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Jul 14 20:24:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:40 2012] Using photon index=1.80, rate=0.0581, arf fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src27.arf
[Sat Jul 14 20:24:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:40 2012] Updating source flux to 2.1e-13
[Sat Jul 14 20:44:28 2012] Flag p found in src. 27 procflags, skipping spectral fitting